Convert the machines using the s3c2410 to use the new driver based
on the common clock framework instead of the legacy Samsung clock driver.

As with the s3c244x, machines using the clkout output will need a fixup
from someone with the hardware.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Convert all machines using these cpus to use the ccf clock driver
instead of the legacy Samsung clock implementation.

Some of the more esotheric machines will probably need a fixup, as they
do strange things to the clkout outputs, that I did not really understand
nor have the hardware to check.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This adds the necessary init functions to init the clocks from the common
clock framework and necessary CONFIG_SAMSUNG_CLOCK ifdefs around the legacy
clock code.

This also includes empty stubs for the *_setup_clocks functions that are
called from the cpufreq driver on resume.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add platform device and select the correct implementation automatically
depending on wether the old samsung_clock or the common clock framework
is enabled.

This is only done for machines already using the old dclk implementation,
as everybody else should move to use dt anyway.

The machine-specific settings for the external clocks will have to be set
by somebody with knowledge about the specific hardware.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
[pebolle@tiscali.nl: pointed out typo and fixed]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The s3c24xx cpufreq driver needs to change the mpll speed and was doing
this by writing raw values from a translation table into the MPLLCON
register.

Change this to use a regular clk_set_rate call when using the common
clock framework and only write the raw value in the samsung_clock case.

The s3c cpufreq driver does already aquire the mpll, so simply add a reference
to struct s3c_cpufreq_config to let set_fvco access it.

While struct clk is opaque the differenciation between samsung clock and
common clock is kept, as the samsung-clock mpll clk does not implement a
real set_rate.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Convert all machines using these cpus to use the ccf clock driver
instead of the legacy Samsung clock implementation.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The Samsung ccf driver already handles the save and restore of the clock
registers on suspend and resume. The architecture code should not
duplicate this when the ccf is active.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This converts the mentioned platforms to use the newly introduced driver
for the common clock framework for them.

With this the whole legacy clock structure can go away too.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This adds the clock controller itself, the xti clock on the smdk2416
as well as the clock references in the individual device nodes.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

As the conversion to the common-clock-framework is done in multiple
steps, it is necessary to prevent conflicts between the different
struct clk implementations.

For this include the s3c24xx_setup_clocks function only when
SAMSUNG_CLOCK is selected and make the socs we don't convert this
time explicitly depend on SAMSUNG_CLOCK, which gets only selected
automatically if COMMON_CLK is not enabled.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The three SoCs share a common clock tree which only differs in the
existence of some special clocks.

As with all parts common to these three SoCs the driver is named
after the s3c2443, as it was the first SoC introducing this structure
and there exists no other label to describe this s3c24xx epoch.

The clock structure is built according to the manuals of the included
SoCs and might include changes in comparison to the previous clock
structure. As an example the sclk_uart gate was never handled previously
and the div_uart was made to be the clock used by the serial driver.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The patch adds asm macros for inc_preempt_count and dec_preempt_count_ti
(which also gets the current thread_info) instead of open-coding them in
arch/arm/vfp/*.S files.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArun KS <getarunks@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

asm/assembler.h is a better place for this macro since it is used by
asm files outside arch/arm/kernel/
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArun KS <getarunks@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Check cpu id in pj4_cp0_init. So for no-PJ4 V7 cpus,
pj4_cpu0_init just return.
This fix will help to make the all the V7 cpus(PJ4 and no-PJ4)
can use code.
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Tested-by: NKevin Hilman <khilman@linaro.org>
Tested-by: NStephen Warren <swarren@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NMatt Porter <mporter@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The patch add cpu_is_pj4 at arch/arm/include/asm/cputype.h
PJ4 has some differences with V7, for example the coprocessor.
To disinguish this kind of situation. cpu_is_pj4 is needed.
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Tested-by: NKevin Hilman <khilman@linaro.org>
Tested-by: NStephen Warren <swarren@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NMatt Porter <mporter@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arm_pm_restart(), arm_pm_idle() and soft_restart() are all declared in
system_misc.h, but this file is not included in process.c.  Add this
missing include.  Found via sparse:

arch/arm/kernel/process.c:98:6: warning: symbol 'soft_restart' was not declared. Should it be static?
arch/arm/kernel/process.c:127:6: warning: symbol 'arm_pm_restart' was not declared. Should it be static?
arch/arm/kernel/process.c:134:6: warning: symbol 'arm_pm_idle' was not declared. Should it be static?
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally.  So
HAS_IOPORT_MAP is the better name for this.

Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.

The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available.  I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.

The changes in this commit were done using:

	$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Strictly speaking this call is a no-op on the platform where dcscb.c is
used since it only has architected caches.  The call was there as a hint
to people inspired by this code when writing their own backend, but the
hint might not always be correct.

For example, if a PL310 were to be used it wouldn't be safe to call
the regular outer_flush_all() as atomic instructions for locking
are involved in that case and those instructions cannot be assumed to
still be operational after v7_exit_coherency_flush() has returned.
Given no other CPUs (in the cluster) should be running at that point
then standard concurrency concerns wouldn't apply.

So let's simply kill this call for now and enhance the existing comment.
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

On non-LPAE ARMv6+, read-only PMD bits are defined with the combination
"PMD_SECT_APX | PMD_SECT_AP_WRITE". Adjusted the bit masks to correctly
report this.
Signed-off-by: NKees Cook <keescook@chromium.org>
Tested-by: NLaura Abbott <lauraa@codeaurora.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When we configure CONFIG_ARM_LPAE=y, pfn << PAGE_SHIFT will
overflow if pfn >= 0x100000 in copy_oldmem_page.
So use __pfn_to_phys for converting.
Signed-off-by: NLiu Hua <sdu.liu@huawei.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use of tracers in local_irq_disable is causes abort loops when called
with irqs disabled using a temporary stack.  Replace local_irq_disable
with raw_local_irq_disable instead to avoid tracers.
Signed-off-by: NSebastian Capella <sebastian.capella@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The patch changes fimd node status to OK.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch changes fimd node status to OK.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch adds s6e8aa0 panel node for trats2.
It adds also trats2 specific properties for DSI
and regulator required by panel.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch adds s6e8aa0 panel node for trats.
It adds also trats specific properties for DSI.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This is a common part of DSI node for all Exynos4 boards.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch replaces panel bindings for panel initialized by boot loader
with bindings to proper ld9040 panel.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Remove pdata quirks for the displays on boards that are now supported
properly with DT.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>

Export the DMA register information from the SoC specific data, such
that we can access the registers directly in omap-dma.c, mapping the
register region ourselves as well.

Rather than calculating the DMA channel register in its entirety for
each access, we pre-calculate an offset base address for the allocated
DMA channel and then just use the appropriate register offset.
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The omap_system_dma_plat_info structure is only seven words, it's not
worth the expense of kmalloc()'ing backing store for this only to
release it later.  Note that platform_device_add_data() copies the
data anyway.  Clean up the initialisation of this structure - we don't
even need code to initialise most of this structure.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This really needs to be there, because otherwise the plat-omap code can
kfree() this data structure, and then re-use the pointer later.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

There's no need for this to be a global variable; move it into the
errata configuration function instead.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We can do much better with this by using a structure to describe each
register, rather than code.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

dma_stride and dma_common_ch_start are only ever initialised to one
known value at initialisation, and are private to each of these files.
There's no point these being variables at all.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The disable_irq_lch method is never actually used, so there's not much
point it existing; remove it.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Provide and use a hook to obtain the underlying DMA platform operations
so that omap-dma.c can access the hardware more directly without
involving the legacy DMA driver.
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Switch the device tree to the new compatibles introduced in the RTC
drivers to have a common pattern accross all Allwinner SoCs.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

virt_to_page() is incredibly inefficient when virt-to-phys patching is
enabled.  This is because we end up with this calculation:

  page = &mem_map[asm virt_to_phys(addr) >> 12 - __pv_phys_offset >> 12]

in assembly.  The asm virt_to_phys() is equivalent this this operation:

  addr - PAGE_OFFSET + __pv_phys_offset

and we can see that because this is assembly, the compiler has no chance
to optimise some of that away.  This should reduce down to:

  page = &mem_map[(addr - PAGE_OFFSET) >> 12]

for the common cases.  Permit the compiler to make this optimisation by
giving it more of the information it needs - do this by providing a
virt_to_pfn() macro.

Another issue which makes this more complex is that __pv_phys_offset is
a 64-bit type on all platforms.  This is needlessly wasteful - if we
store the physical offset as a PFN, we can save a lot of work having
to deal with 64-bit values, which sometimes ends up producing incredibly
horrid code:

     a4c:       e3009000        movw    r9, #0
                        a4c: R_ARM_MOVW_ABS_NC  __pv_phys_offset
     a50:       e3409000        movt    r9, #0          ; r9 = &__pv_phys_offset
                        a50: R_ARM_MOVT_ABS     __pv_phys_offset
     a54:       e3002000        movw    r2, #0
                        a54: R_ARM_MOVW_ABS_NC  __pv_phys_offset
     a58:       e3402000        movt    r2, #0          ; r2 = &__pv_phys_offset
                        a58: R_ARM_MOVT_ABS     __pv_phys_offset
     a5c:       e5999004        ldr     r9, [r9, #4]    ; r9 = high word of __pv_phys_offset
     a60:       e3001000        movw    r1, #0
                        a60: R_ARM_MOVW_ABS_NC  mem_map
     a64:       e592c000        ldr     ip, [r2]        ; ip = low word of __pv_phys_offset
Reviewed-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

My recent commit 871336a9 "ARM: at91: fix broken "if () else" statement"
introduced a typo because of a last-minute fixup. This adds the missing
closing parenthesis.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>