The i386 thread_info contains a previous_esp field that is used
to daisy chain the different stacks for dump_stack()
(ie. irq, softirq, thread stacks).

The goal is to eventual make i386 handling of thread_info the same
as x86_64, which means that the thread_info will not be in the stack
but as a per_cpu variable. We will no longer depend on thread_info
being able to daisy chain different stacks as it will only exist
in one location (the thread stack).

By moving previous_esp to the end of thread_info and referencing
it as an offset instead of using a thread_info field, this becomes
a stepping stone to moving the thread_info.

The offset to get to the previous stack is rather ugly in this
patch, but this is only temporary and the prev_esp will be changed
in the next commit. This commit is more for sanity checks of the
change.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Robert Richter <rric@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20110806012353.891757693@goodmis.org
Link: http://lkml.kernel.org/r/20140206144321.608754481@goodmis.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

According to a git log -p, GET_THREAD_INFO_WITH_ESP() has only been defined
and never been used. Get rid of it.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140206144321.409045251@goodmis.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Nothing references the supervisor_stack in the thread_info field,
and it does not exist in x86_64. To make the two more the same,
it is being removed.
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20110806012353.546183789@goodmis.org
Link: http://lkml.kernel.org/r/20140206144321.203619611@goodmis.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

If we cannot calibrate TSC via MSR based calibration
try_msr_calibrate_tsc() stores zero to fast_calibrate and returns that
to the caller. This value gets then propagated further to clockevents
code resulting division by zero oops like the one below:

 divide error: 0000 [#1] PREEMPT SMP
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W    3.13.0+ #47
 task: ffff880075508000 ti: ffff880075506000 task.ti: ffff880075506000
 RIP: 0010:[<ffffffff810aec14>]  [<ffffffff810aec14>] clockevents_config.part.3+0x24/0xa0
 RSP: 0000:ffff880075507e58  EFLAGS: 00010246
 RAX: ffffffffffffffff RBX: ffff880079c0cd80 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff
 RBP: ffff880075507e70 R08: 0000000000000001 R09: 00000000000000be
 R10: 00000000000000bd R11: 0000000000000003 R12: 000000000000b008
 R13: 0000000000000008 R14: 000000000000b010 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff880079c00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff880079fff000 CR3: 0000000001c0b000 CR4: 00000000001006f0
 Stack:
  ffff880079c0cd80 000000000000b008 0000000000000008 ffff880075507e88
  ffffffff810aecb0 ffff880079c0cd80 ffff880075507e98 ffffffff81030168
  ffff880075507ed8 ffffffff81d1104f 00000000000000c3 0000000000000000
 Call Trace:
  [<ffffffff810aecb0>] clockevents_config_and_register+0x20/0x30
  [<ffffffff81030168>] setup_APIC_timer+0xc8/0xd0
  [<ffffffff81d1104f>] setup_boot_APIC_clock+0x4cc/0x4d8
  [<ffffffff81d0f5de>] native_smp_prepare_cpus+0x3dd/0x3f0
  [<ffffffff81d02ee9>] kernel_init_freeable+0xc3/0x205
  [<ffffffff8177c910>] ? rest_init+0x90/0x90
  [<ffffffff8177c91e>] kernel_init+0xe/0x120
  [<ffffffff8178deec>] ret_from_fork+0x7c/0xb0
  [<ffffffff8177c910>] ? rest_init+0x90/0x90

Prevent this from happening by:
 1) Modifying try_msr_calibrate_tsc() to return calibration value or zero
    if it fails.
 2) Check this return value in native_calibrate_tsc() and in case of zero
    fallback to use normal non-MSR based calibration.

[mw: Added subject and changelog]
Reported-and-tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Bin Gao <bin.gao@linux.intel.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1392810750-18660-1-git-send-email-mika.westerberg@linux.intel.comSigned-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We do not enable the new efi memmap on 32-bit and thus we need to run
runtime_code_page_mkexec() unconditionally there. Fix that.
Reported-and-tested-by: NLejun Zhu <lejun.zhu@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Steven Noonan forwarded a users report where they had a problem starting
vsftpd on a Xen paravirtualized guest, with this in dmesg:

  BUG: Bad page map in process vsftpd  pte:8000000493b88165 pmd:e9cc01067
  page:ffffea00124ee200 count:0 mapcount:-1 mapping:     (null) index:0x0
  page flags: 0x2ffc0000000014(referenced|dirty)
  addr:00007f97eea74000 vm_flags:00100071 anon_vma:ffff880e98f80380 mapping:          (null) index:7f97eea74
  CPU: 4 PID: 587 Comm: vsftpd Not tainted 3.12.7-1-ec2 #1
  Call Trace:
    dump_stack+0x45/0x56
    print_bad_pte+0x22e/0x250
    unmap_single_vma+0x583/0x890
    unmap_vmas+0x65/0x90
    exit_mmap+0xc5/0x170
    mmput+0x65/0x100
    do_exit+0x393/0x9e0
    do_group_exit+0xcc/0x140
    SyS_exit_group+0x14/0x20
    system_call_fastpath+0x1a/0x1f
  Disabling lock debugging due to kernel taint
  BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:0 val:-1
  BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:1 val:1

The issue could not be reproduced under an HVM instance with the same
kernel, so it appears to be exclusive to paravirtual Xen guests.  He
bisected the problem to commit 1667918b ("mm: numa: clear numa
hinting information on mprotect") that was also included in 3.12-stable.

The problem was related to how xen translates ptes because it was not
accounting for the _PAGE_NUMA bit.  This patch splits pte_present to add
a pteval_present helper for use by xen so both bare metal and xen use
the same code when checking if a PTE is present.

[mgorman@suse.de: wrote changelog, proposed minor modifications]
[akpm@linux-foundation.org: fix typo in comment]
Reported-by: NSteven Noonan <steven@uplinklabs.net>
Tested-by: NSteven Noonan <steven@uplinklabs.net>
Signed-off-by: NElena Ufimtseva <ufimtseva@gmail.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 08ece5bb.

As it breaks ARM builds and needs more attention
on the ARM side.
Acked-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The grant mapping API does m2p_override unnecessarily: only gntdev needs it,
for blkback and future netback patches it just cause a lock contention, as
those pages never go to userspace. Therefore this series does the following:
- the original functions were renamed to __gnttab_[un]map_refs, with a new
  parameter m2p_override
- based on m2p_override either they follow the original behaviour, or just set
  the private flag and call set_phys_to_machine
- gnttab_[un]map_refs are now a wrapper to call __gnttab_[un]map_refs with
  m2p_override false
- a new function gnttab_[un]map_refs_userspace provides the old behaviour

It also removes a stray space from page.h and change ret to 0 if
XENFEAT_auto_translated_physmap, as that is the only possible return value
there.

v2:
- move the storing of the old mfn in page->index to gnttab_map_refs
- move the function header update to a separate patch

v3:
- a new approach to retain old behaviour where it needed
- squash the patches into one

v4:
- move out the common bits from m2p* functions, and pass pfn/mfn as parameter
- clear page->private before doing anything with the page, so m2p_find_override
  won't race with this

v5:
- change return value handling in __gnttab_[un]map_refs
- remove a stray space in page.h
- add detail why ret = 0 now at some places

v6:
- don't pass pfn to m2p* functions, just get it locally
Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com>
Suggested-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The SOFT_DIRTY bit shows that the content of memory was changed after a
defined point in the past.  mprotect() doesn't change the content of
memory, so it must not change the SOFT_DIRTY bit.

This bug causes a malfunction: on the first iteration all pages are
dumped.  On other iterations only pages with the SOFT_DIRTY bit are
dumped.  So if the SOFT_DIRTY bit is cleared from a page by mistake, the
page is not dumped and its content will be restored incorrectly.

This patch does nothing with _PAGE_SWP_SOFT_DIRTY, becase pte_modify()
is called only for present pages.

Fixes commit 0f8975ec ("mm: soft-dirty bits for user memory changes
tracking").
Signed-off-by: NAndrey Vagin <avagin@openvz.org>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

LTO in gcc 4.6/47. has trouble with global register variables. They were used
to read the stack pointer. Use a simple inline assembler statement with
a mov instead.

This also helps LLVM/clang, which does not support global register
variables.

[ hpa: Ideally this should become a builtin in both gcc and clang. ]

v2: More general asm constraint. Fix description (Jan Beulich)
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1382458079-24450-6-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The paravirt thunks use a hack of using a static reference to a static
function to reference that function from the top level statement.

This assumes that gcc always generates static function names in a specific
format, which is not necessarily true.

Simply make these functions global and asmlinkage or __visible. This way the
static __used variables are not needed and everything works.

Functions with arguments are __visible to keep the register calling
convention on 32bit.

Changed in paravirt and in all users (Xen and vsmp)

v2: Use __visible for functions with arguments

Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Ido Yariv <ido@wizery.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1382458079-24450-5-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The paravirt patching code assumes that it can reference a
local assembler label between two different top level assembler
statements. This does not work with LTO
where the assembler code may end up in different assembler files.

Replace it with extern / global /asm linkage labels.

This also removes one redundant copy of the macro.

Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1382458079-24450-4-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

When Hyper-V hypervisor leaves are present, KVM must relocate
its own leaves at 0x40000100, because Windows does not look for
Hyper-V leaves at indices other than 0x40000000.  In this case,
the KVM features are at 0x40000101, but the old code would always
look at 0x40000001.

Fix by using kvm_cpuid_base().  This also requires making the
function non-inline, since kvm_cpuid_base() is static.

Fixes: 1085ba7f
Cc: stable@vger.kernel.org
Cc: mtosatti@redhat.com
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It is unnecessary to go through hypervisor_cpuid_base every time
a leaf is found (which will be every time a feature is requested
after the next patch).

Fixes: 1085ba7f
Cc: stable@vger.kernel.org
Cc: mtosatti@redhat.com
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Dave reported big numa system booting is broken.

It turns out that commit 5b6e5295 ("x86: memblock: set current limit
to max low memory address") sets the limit to low wrongly.

max_low_pfn_mapped is different from max_pfn_mapped.
max_low_pfn_mapped is always under 4G.

That will memblock_alloc_nid all go under 4G.

Revert 5b6e5295 to fix a no-boot regression which was triggered by
457ff1de ("lib/swiotlb.c: use memblock apis for early memory
allocations").
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Reported-by: NDave Hansen <dave.hansen@intel.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bisection between 3.11 and 3.12 fingered commit 9824cf97 ("mm:
vmstats: tlb flush counters") to cause overhead problems.

The counters are undeniably useful but how often do we really
need to debug TLB flush related issues?  It does not justify
taking the penalty everywhere so make it a debugging option.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Tested-by: NDavidlohr Bueso <davidlohr@hp.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-XzxjntugxuwpxXhcrxqqh53b@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Make uv_register_nmi_notifier() and uv_handle_nmi_ping() static
to address sparse warnings.

Fix problem where uv_nmi_kexec_failed is unused when
CONFIG_KEXEC is not defined.
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NHedi Berriche <hedi@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20140114162551.480872353@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This is under CAP_SYS_ADMIN, but Smatch complains that mask comes
from the user and the test for "mask > 0xf" can underflow.

The fix is simple: amd_set_subcaches() should hand down not an 'int'
but an 'unsigned long' like it was originally indended to do.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/20140121072209.GA22095@elgon.mountainSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch makes a couple of changes to the SMBIOS/DMI scanning
code so it can be used on other archs (such as ARM and arm64):
(a) wrap the calls to ioremap()/iounmap(), this allows the use of a
    flavor of ioremap() more suitable for random unaligned access;
(b) allow the non-EFI fallback probe into hardcoded physical address
    0xF0000 to be disabled.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NGrant Likely <grant.likely@linaro.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMark Salter <msalter@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The memblock current limit value is used to limit early boot memory
allocations below max low memory address by default, as the kernel can
access only to the low memory.

Hence, set memblock current limit value to the max mapped low memory
address instead of max mapped memory address.
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't support LWP yet, don't give the impression that we do:
represent the LWP state as opaque 128 bytes, the way Linux sees it
currently.

Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-ecarmjtfKpanpAapfck6dj6g@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

In contrast to VMX, SVM dose not automatically transfer DR6 into the
VCPU's arch.dr6. So if we face a DR6 read, we must consult a new vendor
hook to obtain the current value. And as SVM now picks the DR6 state
from its VMCB, we also need a set callback in order to write updates of
DR6 back.

Fixes a regression of 020df079.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off: Peter Lieven <pl@kamp.de>
Signed-off: Gleb Natapov
Signed-off: Vadim Rozenfeld <vrozenfe@redhat.com>

After some consideration I decided to submit only Hyper-V reference
counters support this time. I will submit iTSC support as a separate
patch as soon as it is ready.

v1 -> v2
1. mark TSC page dirty as suggested by
    Eric Northup <digitaleric@google.com> and Gleb
2. disable local irq when calling get_kernel_ns,
    as it was done by Peter Lieven <pl@amp.de>
3. move check for TSC page enable from second patch
    to this one.

v3 -> v4
    Get rid of ref counter offset.

v4 -> v5
    replace __copy_to_user with kvm_write_guest
    when updateing iTSC page.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On SoCs that have the calibration MSRs available, either there is no
PIT, HPET or PMTIMER to calibrate against, or the PIT/HPET/PMTIMER is
driven from the same clock as the TSC, so calibration is redundant and
just slows down the boot.

TSC rate is caculated by this formula:
<maximum core-clock to bus-clock ratio> * <maximum resolved frequency>
The ratio and the resolved frequency ID can be obtained from MSR.
See Intel 64 and IA-32 System Programming Guid section 16.12 and 30.11.5
for details.
Signed-off-by: NBin Gao <bin.gao@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-rgm7xmg7k6qnjlw3ynkcjsmh@git.kernel.org

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64791

When a cpu is downed on a system, the irqs on the cpu are assigned to
other cpus.  It is possible, however, that when a cpu is downed there
aren't enough free vectors on the remaining cpus to account for the
vectors from the cpu that is being downed.

This results in an interesting "overflow" condition where irqs are
"assigned" to a CPU but are not handled.

For example, when downing cpus on a 1-64 logical processor system:

<snip>
[  232.021745] smpboot: CPU 61 is now offline
[  238.480275] smpboot: CPU 62 is now offline
[  245.991080] ------------[ cut here ]------------
[  245.996270] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x246/0x250()
[  246.005688] NETDEV WATCHDOG: p786p1 (ixgbe): transmit queue 0 timed out
[  246.013070] Modules linked in: lockd sunrpc iTCO_wdt iTCO_vendor_support sb_edac ixgbe microcode e1000e pcspkr joydev edac_core lpc_ich ioatdma ptp mdio mfd_core i2c_i801 dca pps_core i2c_core wmi acpi_cpufreq isci libsas scsi_transport_sas
[  246.037633] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0+ #14
[  246.044451] Hardware name: Intel Corporation S4600LH ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
[  246.057371]  0000000000000009 ffff88081fa03d40 ffffffff8164fbf6 ffff88081fa0ee48
[  246.065728]  ffff88081fa03d90 ffff88081fa03d80 ffffffff81054ecc ffff88081fa13040
[  246.074073]  0000000000000000 ffff88200cce0000 0000000000000040 0000000000000000
[  246.082430] Call Trace:
[  246.085174]  <IRQ>  [<ffffffff8164fbf6>] dump_stack+0x46/0x58
[  246.091633]  [<ffffffff81054ecc>] warn_slowpath_common+0x8c/0xc0
[  246.098352]  [<ffffffff81054fb6>] warn_slowpath_fmt+0x46/0x50
[  246.104786]  [<ffffffff815710d6>] dev_watchdog+0x246/0x250
[  246.110923]  [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80
[  246.119097]  [<ffffffff8106092a>] call_timer_fn+0x3a/0x110
[  246.125224]  [<ffffffff8106280f>] ? update_process_times+0x6f/0x80
[  246.132137]  [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80
[  246.140308]  [<ffffffff81061db0>] run_timer_softirq+0x1f0/0x2a0
[  246.146933]  [<ffffffff81059a80>] __do_softirq+0xe0/0x220
[  246.152976]  [<ffffffff8165fedc>] call_softirq+0x1c/0x30
[  246.158920]  [<ffffffff810045f5>] do_softirq+0x55/0x90
[  246.164670]  [<ffffffff81059d35>] irq_exit+0xa5/0xb0
[  246.170227]  [<ffffffff8166062a>] smp_apic_timer_interrupt+0x4a/0x60
[  246.177324]  [<ffffffff8165f40a>] apic_timer_interrupt+0x6a/0x70
[  246.184041]  <EOI>  [<ffffffff81505a1b>] ? cpuidle_enter_state+0x5b/0xe0
[  246.191559]  [<ffffffff81505a17>] ? cpuidle_enter_state+0x57/0xe0
[  246.198374]  [<ffffffff81505b5d>] cpuidle_idle_call+0xbd/0x200
[  246.204900]  [<ffffffff8100b7ae>] arch_cpu_idle+0xe/0x30
[  246.210846]  [<ffffffff810a47b0>] cpu_startup_entry+0xd0/0x250
[  246.217371]  [<ffffffff81646b47>] rest_init+0x77/0x80
[  246.223028]  [<ffffffff81d09e8e>] start_kernel+0x3ee/0x3fb
[  246.229165]  [<ffffffff81d0989f>] ? repair_env_string+0x5e/0x5e
[  246.235787]  [<ffffffff81d095a5>] x86_64_start_reservations+0x2a/0x2c
[  246.242990]  [<ffffffff81d0969f>] x86_64_start_kernel+0xf8/0xfc
[  246.249610] ---[ end trace fb74fdef54d79039 ]---
[  246.254807] ixgbe 0000:c2:00.0 p786p1: initiating reset due to tx timeout
[  246.262489] ixgbe 0000:c2:00.0 p786p1: Reset adapter
Last login: Mon Nov 11 08:35:14 from 10.18.17.119
[root@(none) ~]# [  246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5
[  249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
[  246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5
[  249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX

(last lines keep repeating.  ixgbe driver is dead until module reload.)

If the downed cpu has more vectors than are free on the remaining cpus on the
system, it is possible that some vectors are "orphaned" even though they are
assigned to a cpu.  In this case, since the ixgbe driver had a watchdog, the
watchdog fired and notified that something was wrong.

This patch adds a function, check_vectors(), to compare the number of vectors
on the CPU going down and compares it to the number of vectors available on
the system.  If there aren't enough vectors for the CPU to go down, an
error is returned and propogated back to userspace.

v2: Do not need to look at percpu irqs
v3: Need to check affinity to prevent counting of MSIs in IOAPIC Lowest
    Priority Mode
v4: Additional changes suggested by Gong Chen.
v5/v6/v7/v8: Updated comment text
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1389613861-3853-1-git-send-email-prarit@redhat.comReviewed-by: NGong Chen <gong.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Yang Zhang <yang.z.zhang@Intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Janet Morgan <janet.morgan@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ruiv Wang <ruiv.wang@gmail.com>
Cc: Gong Chen <gong.chen@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>

This code was partially based on Mark Brown's previous work.
Signed-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Link: http://lkml.kernel.org/r/1387224459-25746-4-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: NFei Yang <fei.yang@intel.com>
Cc: Mark F. Brown <mark.f.brown@intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

This patch adds Clovertrail support on intel-mid and makes it more
flexible to support other SoCs.
Signed-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Link: http://lkml.kernel.org/r/1387224459-25746-3-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: NFei Yang <fei.yang@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The original idea to use the microcode cache for the APs doesn't pan out
because we do memory allocation there very early and with IRQs disabled
and we don't want to involve GFP_ATOMIC allocations. Not if it can be
helped.

Thus, extend the caching of the BSP patch approach to the APs and
iterate over the ucode in the initrd instead of using the cache. We
still save the relevant patches to it but later, right before we
jettison the initrd.

While at it, fix early ucode loading on 32-bit too.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Tested-by: NAravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>

We want to use those in AMD's early loading path too. Also, add a
native_wrmsrl variant.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Tested-by: NAravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>

The ramdisk can possibly get relocated if the whole image is not mapped.
And since we're going over it in the microcode loader and fishing out
the relevant microcode patches, we want access it at its new location.
Thus, export it.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Tested-by: NAravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>

With various drivers wanting to inject idle time; we get people
calling idle routines outside of the idle loop proper.

Therefore we need to be extra careful about not missing
TIF_NEED_RESCHED -> PREEMPT_NEED_RESCHED propagations.

While looking at this, I also realized there's a small window in the
existing idle loop where we can miss TIF_NEED_RESCHED; when it hits
right after the tif_need_resched() test at the end of the loop but
right before the need_resched() test at the start of the loop.

So move preempt_fold_need_resched() out of the loop where we're
guaranteed to have TIF_NEED_RESCHED set.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-x9jgh45oeayzajz2mjt0y7d6@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Use a ring-buffer like multi-version object structure which allows
always having a coherent object; we use this to avoid having to
disable IRQs while reading sched_clock() and avoids a problem when
getting an NMI while changing the cyc2ns data.

                        MAINLINE   PRE        POST

    sched_clock_stable: 1          1          1
    (cold) sched_clock: 329841     331312     257223
    (cold) local_clock: 301773     310296     309889
    (warm) sched_clock: 38375      38247      25280
    (warm) local_clock: 100371     102713     85268
    (warm) rdtsc:       27340      27289      24247
    sched_clock_stable: 0          0          0
    (cold) sched_clock: 382634     372706     301224
    (cold) local_clock: 396890     399275     399870
    (warm) sched_clock: 38194      38124      25630
    (warm) local_clock: 143452     148698     129629
    (warm) rdtsc:       27345      27365      24307
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-s567in1e5ekq2nlyhn8f987r@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

There are no __cycles_2_ns() users outside of arch/x86/kernel/tsc.c,
so move it there.

There are no cycles_2_ns() users.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-01lslnavfgo3kmbo4532zlcj@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Use mul_u64_u32_shr() so that x86_64 can use a single 64x64->128 mul.

Before:

0000000000000560 <native_sched_clock>:
 560:   44 8b 1d 00 00 00 00    mov    0x0(%rip),%r11d        # 567 <native_sched_clock+0x7>
 567:   55                      push   %rbp
 568:   48 89 e5                mov    %rsp,%rbp
 56b:   45 85 db                test   %r11d,%r11d
 56e:   75 4f                   jne    5bf <native_sched_clock+0x5f>
 570:   0f 31                   rdtsc
 572:   89 c0                   mov    %eax,%eax
 574:   48 c1 e2 20             shl    $0x20,%rdx
 578:   48 c7 c1 00 00 00 00    mov    $0x0,%rcx
 57f:   48 09 c2                or     %rax,%rdx
 582:   48 c7 c7 00 00 00 00    mov    $0x0,%rdi
 589:   65 8b 04 25 00 00 00    mov    %gs:0x0,%eax
 590:   00
 591:   48 98                   cltq
 593:   48 8b 34 c5 00 00 00    mov    0x0(,%rax,8),%rsi
 59a:   00
 59b:   48 89 d0                mov    %rdx,%rax
 59e:   81 e2 ff 03 00 00       and    $0x3ff,%edx
 5a4:   48 c1 e8 0a             shr    $0xa,%rax
 5a8:   48 0f af 14 0e          imul   (%rsi,%rcx,1),%rdx
 5ad:   48 0f af 04 0e          imul   (%rsi,%rcx,1),%rax
 5b2:   5d                      pop    %rbp
 5b3:   48 03 04 3e             add    (%rsi,%rdi,1),%rax
 5b7:   48 c1 ea 0a             shr    $0xa,%rdx
 5bb:   48 01 d0                add    %rdx,%rax
 5be:   c3                      retq

After:

0000000000000550 <native_sched_clock>:
 550:   8b 3d 00 00 00 00       mov    0x0(%rip),%edi        # 556 <native_sched_clock+0x6>
 556:   55                      push   %rbp
 557:   48 89 e5                mov    %rsp,%rbp
 55a:   48 83 e4 f0             and    $0xfffffffffffffff0,%rsp
 55e:   85 ff                   test   %edi,%edi
 560:   75 2c                   jne    58e <native_sched_clock+0x3e>
 562:   0f 31                   rdtsc
 564:   89 c0                   mov    %eax,%eax
 566:   48 c1 e2 20             shl    $0x20,%rdx
 56a:   48 09 c2                or     %rax,%rdx
 56d:   65 48 8b 04 25 00 00    mov    %gs:0x0,%rax
 574:   00 00
 576:   89 c0                   mov    %eax,%eax
 578:   48 f7 e2                mul    %rdx
 57b:   65 48 8b 0c 25 00 00    mov    %gs:0x0,%rcx
 582:   00 00
 584:   c9                      leaveq
 585:   48 0f ac d0 0a          shrd   $0xa,%rdx,%rax
 58a:   48 01 c8                add    %rcx,%rax
 58d:   c3                      retq

                        MAINLINE   POST

    sched_clock_stable: 1	   1
    (cold) sched_clock: 329841     331312
    (cold) local_clock: 301773     310296
    (warm) sched_clock: 38375      38247
    (warm) local_clock: 100371     102713
    (warm) rdtsc:       27340      27289
    sched_clock_stable: 0          0
    (cold) sched_clock: 382634     372706
    (cold) local_clock: 396890     399275
    (warm) sched_clock: 38194      38124
    (warm) local_clock: 143452     148698
    (warm) rdtsc:       27345      27365
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-piu203ses5y1g36bnyw2n16x@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

During heavy CPU-hotplug operations the following spurious kernel warnings
can trigger:

  do_IRQ: No ... irq handler for vector (irq -1)

  [ See: https://bugzilla.kernel.org/show_bug.cgi?id=64831 ]

When downing a cpu it is possible that there are unhandled irqs
left in the APIC IRR register.  The following code path shows
how the problem can occur:

 1. CPU 5 is to go down.

 2. cpu_disable() on CPU 5 executes with interrupt flag cleared
    by local_irq_save() via stop_machine().

 3. IRQ 12 asserts on CPU 5, setting IRR but not ISR because
    interrupt flag is cleared (CPU unabled to handle the irq)

 4. IRQs are migrated off of CPU 5, and the vectors' irqs are set
    to -1. 5. stop_machine() finishes cpu_disable()

 6. cpu_die() for CPU 5 executes in normal context.

 7. CPU 5 attempts to handle IRQ 12 because the IRR is set for
    IRQ 12.  The code attempts to find the vector's IRQ and cannot
    because it has been set to -1. 8. do_IRQ() warning displays
    warning about CPU 5 IRQ 12.

I added a debug printk to output which CPU & vector was
retriggered and discovered that that we are getting bogus
events.  I see a 100% correlation between this debug printk in
fixup_irqs() and the do_IRQ() warning.

This patchset resolves this by adding definitions for
VECTOR_UNDEFINED(-1) and VECTOR_RETRIGGERED(-2) and modifying
the code to use them.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64831Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Reviewed-by: NRui Wang <rui.y.wang@intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Yang Zhang <yang.z.zhang@Intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: janet.morgan@Intel.com
Cc: tony.luck@Intel.com
Cc: ruiv.wang@gmail.com
Link: http://lkml.kernel.org/r/1388938252-16627-1-git-send-email-prarit@redhat.com
[ Cleaned up the code a bit. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

A number of situations currently require the heavyweight smp_mb(),
even though there is no need to order prior stores against later
loads.  Many architectures have much cheaper ways to handle these
situations, but the Linux kernel currently has no portable way
to make use of them.

This commit therefore supplies smp_load_acquire() and
smp_store_release() to remedy this situation.  The new
smp_load_acquire() primitive orders the specified load against
any subsequent reads or writes, while the new smp_store_release()
primitive orders the specifed store against any prior reads or
writes.  These primitives allow array-based circular FIFOs to be
implemented without an smp_mb(), and also allow a theoretical
hole in rcu_assign_pointer() to be closed at no additional
expense on most architectures.

In addition, the RCU experience transitioning from explicit
smp_read_barrier_depends() and smp_wmb() to rcu_dereference()
and rcu_assign_pointer(), respectively resulted in substantial
improvements in readability.  It therefore seems likely that
replacing other explicit barriers with smp_load_acquire() and
smp_store_release() will provide similar benefits.  It appears
that roughly half of the explicit barriers in core kernel code
might be so replaced.

[Changelog by PaulMck]
Reviewed-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20131213150640.908486364@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Before we do an EMMS in the AMD FXSAVE information leak workaround we
need to clear any pending exceptions, otherwise we trap with a
floating-point exception inside this code.
Reported-by: Nhalfdog <me@halfdog.net>
Tested-by: NBorislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/CA%2B55aFxQnY_PCG_n4=0w-VG=YLXL-yr7oMxyy0WU2gCBAf3ydg@mail.gmail.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Current Intel SOC cores use a MailBox Interface (MBI) to provide access to
configuration registers on devices (called units) connected to the system
fabric. This is a support driver that implements access to this interface on
those platforms that can enumerate the device using PCI. Initial support is for
BayTrail, for which port definitons are provided. This is a requirement for
implementing platform specific features (e.g. RAPL driver requires this to
perform platform specific power management using the registers in PUNIT).
Dependant modules should select IOSF_MBI in their respective Kconfig
configuraiton. Serialized access is handled by all exported routines with
spinlocks.

The API includes 3 functions for access to unit registers:

int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)

port:	indicating the unit being accessed
opcode:	the read or write port specific opcode
offset:	the register offset within the port
mdr:	the register data to be read, written, or modified
mask:	bit locations in mdr to change

Returns nonzero on error

Note: GPU code handles access to the GFX unit. Therefore access to that unit
with this driver is disallowed to avoid conflicts.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1389216471-734-1-git-send-email-david.e.box@linux.intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>

When allocating space for 32-bit BARs, we previously limited RESOURCE
addresses so they would fit in 32 bits.  However, the BUS address need not
be the same as the resource address, and it's the bus address that must fit
in the 32-bit BAR.

This patch adds:

  - pci_clip_resource_to_region(), which clips a resource so it contains
    only the range that maps to the specified bus address region, e.g., to
    clip a resource to 32-bit bus addresses, and

  - pci_bus_alloc_from_region(), which allocates space for a resource from
    the specified bus address region,

and changes pci_bus_alloc_resource() to allocate space for 64-bit BARs from
the entire bus address region, and space for 32-bit BARs from only the bus
address region below 4GB.

If we had this window:

  pci_root HWP0002:0a: host bridge window [mem 0xf0180000000-0xf01fedfffff] (bus address [0x80000000-0xfedfffff])

we previously could not put a 32-bit BAR there, because the CPU addresses
don't fit in 32 bits.  This patch fixes this, so we can use this space for
32-bit BARs.

It's also possible (though unlikely) to have resources with 32-bit CPU
addresses but bus addresses above 4GB.  In this case the previous code
would allocate space that a 32-bit BAR could not map.

Remove PCIBIOS_MAX_MEM_32, which is no longer used.

[bhelgaas: reworked starting from http://lkml.kernel.org/r/1386658484-15774-3-git-send-email-yinghai@kernel.org]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>