This defines a platform hook to enable/disable a device as a wakeup event
source.  It's initially for use with ACPI, but more generally it could be used
whenever enable_irq_wake()/disable_irq_wake() don't suffice.

The hook is called -- if available -- inside pci_enable_wake(); and the
semantics of that call are enhanced so that support for PCI PME# is no longer
needed.  It can now work for devices with "legacy PCI PM", when platform
support allows it.  (That support would use some board-specific signal for for
the same purpose as PME#.)

[akpm@linux-foundation.org: Make it compile with CONFIG_PM=n]
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as896b) fixes an oversight in the design of
device_schedule_callback().  It is necessary to acquire a reference to the
module owning the callback routine, to prevent the module from being
unloaded before the callback can run.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Satyam Sharma <satyam.sharma@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We often have the situation that we register a subchannel and start device
recognition, only to find out that the device is not usable after all, which
triggers an unregister of the subchannel.  This often happens on hundreds of
subchannels on a LPAR, leading to a storm of events which aren't of any use. 
Therefore, use uevent_suppress to delay the KOBJ_ADD uevent for a subchannel
until we know that its ccw_device is to be registered.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Eric Rannaud <eric.rannaud@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

the DMA pool handler uses a semaphore as mutex. use the mutex API
instead of the (binary) semaphore
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As pointed out by Dave Jones.

Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In the future we will allow the uevent type to be written to the uevent
file to trigger the different types of uevents.  But for now, as we only
support the ADD event, warn if userspace tries to write anything else to
this file.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This allows sysfs to show the environment variables that are available
if the uevent happens.  This lets userspace not have to cache all of
this information as the kernel already knows it.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

the current driver tree contains the removal of subsys.rwsem.
Unfortunately, this breaks qeth. However, it should be no problem to
fix the walking of the devices for /proc/qeth:

No need to take subsys.rwsem during walking the devices,
driver_find_devices() should already suffice.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The subsystem rwsem is not used by the driver core at all, so the use of
it in the phy code doesn't make any sense.  They might possibly
want to use a local lock, but I am unsure about that.

Cc: netdev <netdev@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The subsystem rwsem is not used by the driver core at all, so the use of
it in the ieee1394 code doesn't make any sense.  They might possibly
want to use a local lock, but as most of these operations are already
protected by a local lock, it really doesn't look like it would be
needed.

Cc: Ben Collins <bcollins@debian.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: linux1394-devel <linux1394-devel@lists.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The subsystem rwsem is not used by the driver core at all, so the use of
it in the ide-proc code of it doesn't make any sense.  Perhaps a local
lock might be needed, but I do not really think so.

Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: linux ide <linux-ide@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The subsystem rwsem is not used by the driver core at all, so there is
no point in trying to access it.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The subsystem rwsem is not used by the driver core at all, so there is
no point in trying to access it.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The rwsem is not used to protect anything, so the use of it by the PNP
subsystem isn't really useful, and it's doubtful if it really did anything or
not.  So I've removed it.

Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The driver core stopped using the rwsem a long time ago, yet the USB
core still grabbed the lock, thinking it protected something.  This
patch removes that useless use.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: David Brownell <david-b@pacbell.net>
Cc: linux-usb-devel <linux-usb-devel@lists.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

SCSI was using the incorrect lock to protect walking the list of all
devices in the class.  This patch fixes this.

Cc: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This lock is never used by the rest of the driver core, so the fact that
we are grabbing it here means it isn't correct...
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Driver core: add suspend() and resume() to struct device_type

In cases when there are devices of different types in the same class
we can't use class's implementation of suspend and resume methods and
we need to add them to struct device_type instead.

Also fix error handling in resume code (we should not try to call
class's resume method iof bus's resume method for the device failed.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make use of add_uevent_var() instead of (often incorrectly) open coding it.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NEric Rannaud <eric.rannaud@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use uevent_suppress instead of returning an error code in
firmware_uevent(). Get rid of the now unneeded FW_STATUS_READY
and FW_STATUS_READY_NOHOTPLUG.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Suppress uevents for devices if uevent_suppress is set via
dev_uevent_filter(). This makes the driver core suppress all device
uevents, not just the add event in device_add().
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The completion in the driver release path is due to ancient history in
the _very_ early 2.5 days when we were not tracking the module reference
count of attributes.  It is not needed at all and can be removed.

Note, we now have an empty release function for the driver structure.
This is due to the fact that drivers are statically allocated in the
system at this point in time, something which I want to change in the
future.  But remember, drivers are really code, which is reference
counted by the module, unlike devices, which are data and _must_ be
reference counted properly in order to work correctly.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Don't fail bus_attach_device() if the device cannot be bound.

If dev->driver has been specified, reset it to NULL if device_bind_driver()
failed and add the device as an unbound device.  As a result,
bus_attach_device() now cannot fail, and we can remove some checking from
device_add().

Also remove an unneeded check in bus_rescan_devices_helper().
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make multithreaded probing work per subsystem instead of per driver.

It doesn't make much sense to probe the same device for multiple drivers in
parallel (after all, only one driver can bind to the device).  Instead, create
a probing thread for each device that probes the drivers one after another. 
Also make the decision to use multi-threaded probe per bus instead of per
device and adapt the pci code.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If "name" of a device_type is specified, the uevent will
contain the device_type name in the DEVTYPE variable.
This helps userspace to distingiush between different types
of devices, belonging to the same subsystem.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Driver core: use attribute groups in struct device_type

Attribute groups are more flexible than attribute lists
(an attribute list can be represented by anonymous group)
so switch struct device_type to use them.

Also rework attribute creation for devices so that they all
cleaned up properly in case of errors.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Cc: Kay Sievers <kay.sievers@novell.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We get two per-bus sysfs files:
  ls-l /sys/subsystem/usb
  drwxr-xr-x 2 root root    0 2007-02-16 16:42 devices
  drwxr-xr-x 7 root root    0 2007-02-16 14:55 drivers
  -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe
  --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe

The flag "drivers_autoprobe" controls the behavior of the bus to bind
devices by default, or just initialize the device and leave it alone.

The command "drivers_probe" accepts a bus_id and the bus tries to bind a
driver to this device.

Systems who want to control the driver binding with udev, switch off the
bus initiated probing:
  echo 0 > /sys/subsystem/usb/drivers_autoprobe
  echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe
  ...

and initiate the probing with udev rules like:
  ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel"
  ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel"
  ...

Custom driver binding can happen in earlier rules by something like:
  ACTION=="add", SUBSYSTEM=="usb", \
  ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \
  ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel"

This is intended to solve the modprobe.conf mess with "install-rules", custom
bind/unbind-scripts and all the weird things people invented over the years.
It should also provide the functionality "libusual" was supposed to do.

With udev, one can just write a udev rule to drive all USB-disks at the
third port of USB-hub by the "ub" driver, and everything else by
usb-storage. One can also instruct udev to bind different wireless
drivers to identical cards - just selected by the pcmcia slot-number, and
whatever ...

To use the mentioned rules, it needs udev version 106, to be able to
write ATTR{}="$kernel" to sysfs files.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As the new-style class devices (as opposed to old-style struct
class_device) are becoming more widely used, I noticed that the
dev_printk-based functions are not working properly with these.
New-style class devices have no driver nor bus, almost by definition,
and as a result dev_driver_string(), which is used as the first
parameter of dev_printk, resolves to an empty string. This causes
entries like the following to show in my logs:

 i2c-2: adapter [SMBus stub driver] registered

Notice the unaesthetical leading whitespace. In order to fix this
problem, I suggest that we extend dev_driver_string to deal with
new-style class devices:
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

  - uses a kset in "struct class" to keep track of all directories
    belonging to this class
  - merges with the /sys/devices/virtual logic.
  - removes the namespace-dir if the last member of that class
    leaves the directory.

There may be locking or refcounting fixes left, I stopped when it seemed
to work with network and sound modules. :)

From: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

 - At the moment we jump here device was't added to
   dev->class->devices list yet.
Signed-off-by: NMonakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead.
Signed-off-by: NMilind Arun Choudhary <milindchoudhary@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Generate uevents for all cpus if cpu capability changes. This can
happen e.g. because the cpus are overheating. The cpu capability can
be read via /sys/devices/system/cpu/cpuN/capability.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

Use only capital letters for defines.

Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Reopen of /dev/account failed. The IUCV path has to be terminated
in vmlogrdr_release.
Signed-off-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add explicit sclp initialization for those sclp users that do not
register with the interface.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

A patch for the CTC / ESCON network driver.  Switch from kmalloc to kzalloc
when appropriate, remove some unnecessary kmalloc casts too.  Since I have no
s390 machine, I didn't compile it but I examined it carefully.
Signed-off-by: N"Ahmed S. Darwish" <darwish.07@gmail.com>
Cc: Frank Pavlic <fpavlic@de.ibm.com>
Cc: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

s390 machines provide hardware support for creating Linux dumps on SCSI
disks. For creating a dump a special purpose dump Linux is used. The first
32 MB of memory are saved by the hardware before the dump Linux is
booted. Via an SCLP interface, the saved memory can be accessed from
Linux. This patch exports memory and registers of the crashed Linux to
userspace via a debugfs file. For more information refer to
Documentation/s390/zfcpdump.txt, which is included in this patch.
Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

Specifying 'ipldev' in the dasd= kernel parameter will automatically
activate the boot device for use by the dasd driver.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This patch adds a sysfs-attribute 'status' to make the DASD device-status
accessible from user-space. In addition, the DASD driver generates an
uevent(CHANGE) for the ccw-device on each device-status change.
This enables user-space applications (e.g. udev) to do related processing.
Signed-off-by: NHorst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We get this:

Section mismatch: reference to .init.text:con3270_consetup from .data
		  between 'con3270' (at offset 0x45c8) and 'con3270_fn'
Section mismatch: reference to .init.text:con3215_consetup from .data
		  between 'con3215' (at offset 0x4678) and
		  'raw3215_ccw_driver'

Since there is no difference between a non present console setup
function and one that returns only 0 remove them.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>