Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 30 5月, 2012 4 次提交
  3. 22 3月, 2012 5 次提交
    • K
      memcg: fix performance of mem_cgroup_begin_update_page_stat() · 4331f7d3
      由 KAMEZAWA Hiroyuki 提交于 
      mem_cgroup_begin_update_page_stat() should be very fast because it's
called very frequently.  Now, it needs to look up page_cgroup and its
memcg....this is slow.

This patch adds a global variable to check "any memcg is moving or not".
With this, the caller doesn't need to visit page_cgroup and memcg.

Here is a test result.  A test program makes page faults onto a file,
MAP_SHARED and makes each page's page_mapcount(page) > 1, and free the
range by madvise() and page fault again.  This program causes 26214400
times of page fault onto a file(size was 1G.) and shows shows the cost of
mem_cgroup_begin_update_page_stat().

Before this patch for mem_cgroup_begin_update_page_stat()

    [kamezawa@bluextal test]$ time ./mmap 1G

    real    0m21.765s
    user    0m5.999s
    sys     0m15.434s

    27.46%     mmap  mmap               [.] reader
    21.15%     mmap  [kernel.kallsyms]  [k] page_fault
     9.17%     mmap  [kernel.kallsyms]  [k] filemap_fault
     2.96%     mmap  [kernel.kallsyms]  [k] __do_fault
     2.83%     mmap  [kernel.kallsyms]  [k] __mem_cgroup_begin_update_page_stat

After this patch

    [root@bluextal test]# time ./mmap 1G

    real    0m21.373s
    user    0m6.113s
    sys     0m15.016s

In usual path, calls to __mem_cgroup_begin_update_page_stat() goes away.

Note: we may be able to remove this optimization in future if
      we can get pointer to memcg directly from struct page.

[akpm@linux-foundation.org: don't return a void]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NGreg Thelen <gthelen@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4331f7d3
    • K
      memcg: use new logic for page stat accounting · 89c06bd5
      由 KAMEZAWA Hiroyuki 提交于 
      Now, page-stat-per-memcg is recorded into per page_cgroup flag by
duplicating page's status into the flag.  The reason is that memcg has a
feature to move a page from a group to another group and we have race
between "move" and "page stat accounting",

Under current logic, assume CPU-A and CPU-B.  CPU-A does "move" and CPU-B
does "page stat accounting".

When CPU-A goes 1st,

            CPU-A                           CPU-B
                                    update "struct page" info.
    move_lock_mem_cgroup(memcg)
    see pc->flags
    copy page stat to new group
    overwrite pc->mem_cgroup.
    move_unlock_mem_cgroup(memcg)
                                    move_lock_mem_cgroup(mem)
                                    set pc->flags
                                    update page stat accounting
                                    move_unlock_mem_cgroup(mem)

stat accounting is guarded by move_lock_mem_cgroup() and "move" logic
(CPU-A) doesn't see changes in "struct page" information.

But it's costly to have the same information both in 'struct page' and
'struct page_cgroup'.  And, there is a potential problem.

For example, assume we have PG_dirty accounting in memcg.
PG_..is a flag for struct page.
PCG_ is a flag for struct page_cgroup.
(This is just an example. The same problem can be found in any
 kind of page stat accounting.)

	  CPU-A                               CPU-B
      TestSet PG_dirty
      (delay)                        TestClear PG_dirty
                                     if (TestClear(PCG_dirty))
                                          memcg->nr_dirty--
      if (TestSet(PCG_dirty))
          memcg->nr_dirty++

Here, memcg->nr_dirty = +1, this is wrong.  This race was reported by Greg
Thelen <gthelen@google.com>.  Now, only FILE_MAPPED is supported but
fortunately, it's serialized by page table lock and this is not real bug,
_now_,

If this potential problem is caused by having duplicated information in
struct page and struct page_cgroup, we may be able to fix this by using
original 'struct page' information.  But we'll have a problem in "move
account"

Assume we use only PG_dirty.

         CPU-A                   CPU-B
    TestSet PG_dirty
    (delay)                    move_lock_mem_cgroup()
                               if (PageDirty(page))
                                      new_memcg->nr_dirty++
                               pc->mem_cgroup = new_memcg;
                               move_unlock_mem_cgroup()
    move_lock_mem_cgroup()
    memcg = pc->mem_cgroup
    new_memcg->nr_dirty++

accounting information may be double-counted.  This was original reason to
have PCG_xxx flags but it seems PCG_xxx has another problem.

I think we need a bigger lock as

     move_lock_mem_cgroup(page)
     TestSetPageDirty(page)
     update page stats (without any checks)
     move_unlock_mem_cgroup(page)

This fixes both of problems and we don't have to duplicate page flag into
page_cgroup.  Please note: move_lock_mem_cgroup() is held only when there
are possibility of "account move" under the system.  So, in most path,
status update will go without atomic locks.

This patch introduces mem_cgroup_begin_update_page_stat() and
mem_cgroup_end_update_page_stat() both should be called at modifying
'struct page' information if memcg takes care of it.  as

     mem_cgroup_begin_update_page_stat()
     modify page information
     mem_cgroup_update_page_stat()
     => never check any 'struct page' info, just update counters.
     mem_cgroup_end_update_page_stat().

This patch is slow because we need to call begin_update_page_stat()/
end_update_page_stat() regardless of accounted will be changed or not.  A
following patch adds an easy optimization and reduces the cost.

[akpm@linux-foundation.org: s/lock/locked/]
[hughd@google.com: fix deadlock by avoiding stat lock when anon]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Greg Thelen <gthelen@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      89c06bd5
    • K
      memcg: kill dead prev_priority stubs · a710920c
      由 Konstantin Khlebnikov 提交于 
      This code was removed in 25edde03 ("vmscan: kill prev_priority
completely")
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a710920c
    • H
      memcg: replace MEM_CONT by MEM_RES_CTLR · 31a79235
      由 Hugh Dickins 提交于 
      Correct an #endif comment in memcontrol.h from MEM_CONT to MEM_RES_CTLR.
Signed-off-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NKirill A. Shutemov <kirill@shutemov.name>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      31a79235
    • D
      mm, memcg: pass charge order to oom killer · e845e199
      由 David Rientjes 提交于 
      The oom killer typically displays the allocation order at the time of oom
as a part of its diangostic messages (for global, cpuset, and mempolicy
ooms).

The memory controller may also pass the charge order to the oom killer so
it can emit the same information.  This is useful in determining how large
the memory allocation is that triggered the oom killer.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e845e199
  5. 06 3月, 2012 1 次提交
    • H
      memcg: fix GPF when cgroup removal races with last exit · 7512102c
      由 Hugh Dickins 提交于 
      When moving tasks from old memcg (with move_charge_at_immigrate on new
memcg), followed by removal of old memcg, hit General Protection Fault in
mem_cgroup_lru_del_list() (called from release_pages called from
free_pages_and_swap_cache from tlb_flush_mmu from tlb_finish_mmu from
exit_mmap from mmput from exit_mm from do_exit).

Somewhat reproducible, takes a few hours: the old struct mem_cgroup has
been freed and poisoned by SLAB_DEBUG, but mem_cgroup_lru_del_list() is
still trying to update its stats, and take page off lru before freeing.

A task, or a charge, or a page on lru: each secures a memcg against
removal.  In this case, the last task has been moved out of the old memcg,
and it is exiting: anonymous pages are uncharged one by one from the
memcg, as they are zapped from its pagetables, so the charge gets down to
0; but the pages themselves are queued in an mmu_gather for freeing.

Most of those pages will be on lru (and force_empty is careful to
lru_add_drain_all, to add pages from pagevec to lru first), but not
necessarily all: perhaps some have been isolated for page reclaim, perhaps
some isolated for other reasons.  So, force_empty may find no task, no
charge and no page on lru, and let the removal proceed.

There would still be no problem if these pages were immediately freed; but
typically (and the put_page_testzero protocol demands it) they have to be
added back to lru before they are found freeable, then removed from lru
and freed.  We don't see the issue when adding, because the
mem_cgroup_iter() loops keep their own reference to the memcg being
scanned; but when it comes to mem_cgroup_lru_del_list().

I believe this was not an issue in v3.2: there, PageCgroupAcctLRU and
PageCgroupUsed flags were used (like a trick with mirrors) to deflect view
of pc->mem_cgroup to the stable root_mem_cgroup when neither set.
38c5d72f ("memcg: simplify LRU handling by new rule") mercifully
removed those convolutions, but left this General Protection Fault.

But it's surprisingly easy to restore the old behaviour: just check
PageCgroupUsed in mem_cgroup_lru_add_list() (which decides on which lruvec
to add), and reset pc to root_mem_cgroup if page is uncharged.  A risky
change?  just going back to how it worked before; testing, and an audit of
uses of pc->mem_cgroup, show no problem.

And there's a nice bonus: with mem_cgroup_lru_add_list() itself making
sure that an uncharged page goes to root lru, mem_cgroup_reset_owner() no
longer has any purpose, and we can safely revert 4e5f01c2 ("memcg:
clear pc->mem_cgroup if necessary").

Calling update_page_reclaim_stat() after add_page_to_lru_list() in swap.c
is not strictly necessary: the lru_lock there, with RCU before memcg
structures are freed, makes mem_cgroup_get_reclaim_stat_from_page safe
without that; but it seems cleaner to rely on one dependency less.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7512102c
  7. 13 1月, 2012 6 次提交
  9. 10 1月, 2012 1 次提交
  11. 16 12月, 2011 1 次提交
  13. 13 12月, 2011 2 次提交
  15. 03 11月, 2011 2 次提交
  17. 01 11月, 2011 1 次提交
    • M
      mm: change isolate mode from #define to bitwise type · 4356f21d
      由 Minchan Kim 提交于 
      Change ISOLATE_XXX macro with bitwise isolate_mode_t type.  Normally,
macro isn't recommended as it's type-unsafe and making debugging harder as
symbol cannot be passed throught to the debugger.

Quote from Johannes
" Hmm, it would probably be cleaner to fully convert the isolation mode
into independent flags.  INACTIVE, ACTIVE, BOTH is currently a
tri-state among flags, which is a bit ugly."

This patch moves isolate mode from swap.h to mmzone.h by memcontrol.h
Signed-off-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4356f21d
  19. 15 9月, 2011 1 次提交
  21. 04 8月, 2011 1 次提交
  23. 27 7月, 2011 2 次提交
    • K
      memcg: add memory.vmscan_stat · 82f9d486
      由 KAMEZAWA Hiroyuki 提交于 
      The commit log of 0ae5e89c ("memcg: count the soft_limit reclaim
in...") says it adds scanning stats to memory.stat file.  But it doesn't
because we considered we needed to make a concensus for such new APIs.

This patch is a trial to add memory.scan_stat. This shows
  - the number of scanned pages(total, anon, file)
  - the number of rotated pages(total, anon, file)
  - the number of freed pages(total, anon, file)
  - the number of elaplsed time (including sleep/pause time)

  for both of direct/soft reclaim.

The biggest difference with oringinal Ying's one is that this file
can be reset by some write, as

  # echo 0 ...../memory.scan_stat

Example of output is here. This is a result after make -j 6 kernel
under 300M limit.

  [kamezawa@bluextal ~]$ cat /cgroup/memory/A/memory.scan_stat
  [kamezawa@bluextal ~]$ cat /cgroup/memory/A/memory.vmscan_stat
  scanned_pages_by_limit 9471864
  scanned_anon_pages_by_limit 6640629
  scanned_file_pages_by_limit 2831235
  rotated_pages_by_limit 4243974
  rotated_anon_pages_by_limit 3971968
  rotated_file_pages_by_limit 272006
  freed_pages_by_limit 2318492
  freed_anon_pages_by_limit 962052
  freed_file_pages_by_limit 1356440
  elapsed_ns_by_limit 351386416101
  scanned_pages_by_system 0
  scanned_anon_pages_by_system 0
  scanned_file_pages_by_system 0
  rotated_pages_by_system 0
  rotated_anon_pages_by_system 0
  rotated_file_pages_by_system 0
  freed_pages_by_system 0
  freed_anon_pages_by_system 0
  freed_file_pages_by_system 0
  elapsed_ns_by_system 0
  scanned_pages_by_limit_under_hierarchy 9471864
  scanned_anon_pages_by_limit_under_hierarchy 6640629
  scanned_file_pages_by_limit_under_hierarchy 2831235
  rotated_pages_by_limit_under_hierarchy 4243974
  rotated_anon_pages_by_limit_under_hierarchy 3971968
  rotated_file_pages_by_limit_under_hierarchy 272006
  freed_pages_by_limit_under_hierarchy 2318492
  freed_anon_pages_by_limit_under_hierarchy 962052
  freed_file_pages_by_limit_under_hierarchy 1356440
  elapsed_ns_by_limit_under_hierarchy 351386416101
  scanned_pages_by_system_under_hierarchy 0
  scanned_anon_pages_by_system_under_hierarchy 0
  scanned_file_pages_by_system_under_hierarchy 0
  rotated_pages_by_system_under_hierarchy 0
  rotated_anon_pages_by_system_under_hierarchy 0
  rotated_file_pages_by_system_under_hierarchy 0
  freed_pages_by_system_under_hierarchy 0
  freed_anon_pages_by_system_under_hierarchy 0
  freed_file_pages_by_system_under_hierarchy 0
  elapsed_ns_by_system_under_hierarchy 0

total_xxxx is for hierarchy management.

This will be useful for further memcg developments and need to be
developped before we do some complicated rework on LRU/softlimit
management.

This patch adds a new struct memcg_scanrecord into scan_control struct.
sc->nr_scanned at el is not designed for exporting information.  For
example, nr_scanned is reset frequentrly and incremented +2 at scanning
mapped pages.

To avoid complexity, I added a new param in scan_control which is for
exporting scanning score.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Cc: Andrew Bresticker <abrestic@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      82f9d486
    • K
      memcg: consolidate memory cgroup lru stat functions · bb2a0de9
      由 KAMEZAWA Hiroyuki 提交于 
      In mm/memcontrol.c, there are many lru stat functions as..

  mem_cgroup_zone_nr_lru_pages
  mem_cgroup_node_nr_file_lru_pages
  mem_cgroup_nr_file_lru_pages
  mem_cgroup_node_nr_anon_lru_pages
  mem_cgroup_nr_anon_lru_pages
  mem_cgroup_node_nr_unevictable_lru_pages
  mem_cgroup_nr_unevictable_lru_pages
  mem_cgroup_node_nr_lru_pages
  mem_cgroup_nr_lru_pages
  mem_cgroup_get_local_zonestat

Some of them are under #ifdef MAX_NUMNODES >1 and others are not.
This seems bad. This patch consolidates all functions into

  mem_cgroup_zone_nr_lru_pages()
  mem_cgroup_node_nr_lru_pages()
  mem_cgroup_nr_lru_pages()

For these functions, "which LRU?" information is passed by a mask.

example:
  mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON))

And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON.

example:
  mem_cgroup_nr_lru_pages(mem, ALL_LRU)

BTW, considering layout of NUMA memory placement of counters, this patch seems
to be better.

Now, when we gather all LRU information, we scan in following orer
    for_each_lru -> for_each_node -> for_each_zone.

This means we'll touch cache lines in different node in turn.

After patch, we'll scan
    for_each_node -> for_each_zone -> for_each_lru(mask)

Then, we'll gather information in the same cacheline at once.

[akpm@linux-foundation.org: fix warnigns, build error]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bb2a0de9
  25. 16 6月, 2011 1 次提交
  27. 27 5月, 2011 4 次提交
    • Y
      memcg: add the pagefault count into memcg stats · 456f998e
      由 Ying Han 提交于 
      Two new stats in per-memcg memory.stat which tracks the number of page
faults and number of major page faults.

  "pgfault"
  "pgmajfault"

They are different from "pgpgin"/"pgpgout" stat which count number of
pages charged/discharged to the cgroup and have no meaning of reading/
writing page to disk.

It is valuable to track the two stats for both measuring application's
performance as well as the efficiency of the kernel page reclaim path.
Counting pagefaults per process is useful, but we also need the aggregated
value since processes are monitored and controlled in cgroup basis in
memcg.

Functional test: check the total number of pgfault/pgmajfault of all
memcgs and compare with global vmstat value:

  $ cat /proc/vmstat | grep fault
  pgfault 1070751
  pgmajfault 553

  $ cat /dev/cgroup/memory.stat | grep fault
  pgfault 1071138
  pgmajfault 553
  total_pgfault 1071142
  total_pgmajfault 553

  $ cat /dev/cgroup/A/memory.stat | grep fault
  pgfault 199
  pgmajfault 0
  total_pgfault 199
  total_pgmajfault 0

Performance test: run page fault test(pft) wit 16 thread on faulting in
15G anon pages in 16G container.  There is no regression noticed on the
"flt/cpu/s"

Sample output from pft:

  TAG pft:anon-sys-default:
    Gb  Thr CLine   User     System     Wall    flt/cpu/s fault/wsec
    15   16   1     0.67s   233.41s    14.76s   16798.546 266356.260

  +-------------------------------------------------------------------------+
      N           Min           Max        Median           Avg        Stddev
  x  10     16682.962     17344.027     16913.524     16928.812      166.5362
  +  10     16695.568     16923.896     16820.604     16824.652     84.816568
  No difference proven at 95.0% confidence

[akpm@linux-foundation.org: fix build]
[hughd@google.com: shmem fix]
Signed-off-by: NYing Han <yinghan@google.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      456f998e
    • Y
      memcg: rename mem_cgroup_zone_nr_pages() to mem_cgroup_zone_nr_lru_pages() · 1bac180b
      由 Ying Han 提交于 
      The caller of the function has been renamed to zone_nr_lru_pages(), and
this is just fixing up in the memcg code.  The current name is easily to
be mis-read as zone's total number of pages.
Signed-off-by: NYing Han <yinghan@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1bac180b
    • Y
      memcg: reclaim memory from nodes in round-robin order · 889976db
      由 Ying Han 提交于 
      Presently, memory cgroup's direct reclaim frees memory from the current
node.  But this has some troubles.  Usually when a set of threads works in
a cooperative way, they tend to operate on the same node.  So if they hit
limits under memcg they will reclaim memory from themselves, damaging the
active working set.

For example, assume 2 node system which has Node 0 and Node 1 and a memcg
which has 1G limit.  After some work, file cache remains and the usages
are

   Node 0:  1M
   Node 1:  998M.

and run an application on Node 0, it will eat its foot before freeing
unnecessary file caches.

This patch adds round-robin for NUMA and adds equal pressure to each node.
When using cpuset's spread memory feature, this will work very well.

But yes, a better algorithm is needed.

[akpm@linux-foundation.org: comment editing]
[kamezawa.hiroyu@jp.fujitsu.com: fix time comparisons]
Signed-off-by: NYing Han <yinghan@google.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      889976db
    • Y
      memcg: count the soft_limit reclaim in global background reclaim · 0ae5e89c
      由 Ying Han 提交于 
      The global kswapd scans per-zone LRU and reclaims pages regardless of the
cgroup. It breaks memory isolation since one cgroup can end up reclaiming
pages from another cgroup. Instead we should rely on memcg-aware target
reclaim including per-memcg kswapd and soft_limit hierarchical reclaim under
memory pressure.

In the global background reclaim, we do soft reclaim before scanning the
per-zone LRU. However, the return value is ignored. This patch is the first
step to skip shrink_zone() if soft_limit reclaim does enough work.

This is part of the effort which tries to reduce reclaiming pages in global
LRU in memcg. The per-memcg background reclaim patchset further enhances the
per-cgroup targetting reclaim, which I should have V4 posted shortly.

Try running multiple memory intensive workloads within seperate memcgs. Watch
the counters of soft_steal in memory.stat.

  $ cat /dev/cgroup/A/memory.stat | grep 'soft'
  soft_steal 240000
  soft_scan 240000
  total_soft_steal 240000
  total_soft_scan 240000

This patch:

In the global background reclaim, we do soft reclaim before scanning the
per-zone LRU.  However, the return value is ignored.

We would like to skip shrink_zone() if soft_limit reclaim does enough
work.  Also, we need to make the memory pressure balanced across per-memcg
zones, like the logic vm-core.  This patch is the first step where we
start with counting the nr_scanned and nr_reclaimed from soft_limit
reclaim into the global scan_control.
Signed-off-by: NYing Han <yinghan@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0ae5e89c
  29. 15 4月, 2011 1 次提交
  31. 24 3月, 2011 1 次提交
  33. 23 3月, 2011 2 次提交
  35. 21 1月, 2011 1 次提交
  37. 14 1月, 2011 2 次提交
  39. 11 8月, 2010 1 次提交