ALC883 medion model doesn't unmute the proper amps so no output can be heard.
Replaced the mute switches to behave just like other models.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Some machines with Cx5045 seem to have no problem with the volume
over 0dB on NID 0x17.  Disable amp overrides for other devices but HP.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

MacBook 3.1 is compatible with model=mbp3.
Added the codec SSID 10b6:3600.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Add the SSID for the "Fujitsu Siemens Amilo M1451G" laptop to
patch_realtek.c , so that it uses ALC880_FUJITSU by default.
Signed-off-by: NTravis Place <wishie@wishie.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added the SSID of a known iMac 24" to automatically use
ALC885_IMAC24 quirk.
Signed-off-by: NTravis Place <wishie@wishie.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

AC_VERB_GET_DIGI_CONVERT_2 isn't actually implemented but reserved.
The whole SIC bits are returned from DIGI_CONVERT_1.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Don't create mixer volume elements for Headphone and Speaker if they
use the same DAC as normal line-outs on AD1988.  Otherwise the amp
value gets screwed up, e.g.
	https://bugzilla.novell.com/show_bug.cgi?id=398255Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use the standard upper_32_bits() instead of own macro.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use bdl_pos_adj=32 as default except for Intel hardwares confirmed
to work with bdl_pos_adj=1.  Looks like ATI and NVidia require this
higher value.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added support for new family of IDT codecs.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Removed unused mutex from patch_*.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Sort stac9205_cfg_table in the order of id numbers, and removed the
duplicated (obsoleted) entries for 0x01fc and 0x01fd.  This doesn't
change the driver behavior since the old entries are all secondary.

The duplication occured due to commit dfe495d0, and the old entries
were introduced by commit ae0a8ed8.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The pending IRQ handling is a very hackish workaround and should be
avoided as much as possible via a larger bdl_pos_adj option value.
Put a warning message if this situation occurs so that the user may have
a chance to notice that something is wrong.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

ATI SB controllers seem to report the DMA ahead in the amount of FIFO.
Thus bdl_pos_adj should be 32 for them as default.

Also, the default value is set to -1, which means to make the driver
to choose the appropriate value.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The option bdl_pos_adj should be provided for each card instance instead of
a global one because the value depends rather on each controller-chip.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

position_fix=3 is the option to correct the DMA position with the
FIFO size.  But, it never worked correctly, and we have now more other
workarounds for the DMA position fixes.  Thus better to remove it.

Also, change POS_FIX_NONE to POS_FIX_LPIB to represent its real role
better.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added a new option, bdl_pos_adj, to adjust the delay of IRQ-wakeup
timing.

Most HD-audio hardwares have a problem that a BDL IRQ is issued before
actually the data and the DMA pointer are updated.
We have already a mechanism to force to delay snd_pcm_period_elapsed()
calls via workq, but this costs much CPU, and typically the delay is
within one sample.  Thus, it's more clever to adjust the BDL entries
instead.

The new option adds the size of the delay in frames.  As default,
it's set to 1 -- that is, one sample delay.  Even the hardware is
really correct, one sample delay is relatively harmless in comparison
with reporting wrong positions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

I have Toshiba dynabook SS RX1 and this patch adds that support.
Signed-off-by: NAkio Idehara <zbe64533@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

It turned out that some ICH9-based boards use SD3 for the audio codec
where the current driver code doesn't probe.  Since we have a better
codec slot check now, it must be safe to increase this to 4.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On some Realtek codecs, the analog PLL gating control bit must be set
off while the default value is 1.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These two motherboards's pin configuration are not covered by driver.
I wrote a new model to support them.
Signed-off-by: NJiang zhe <zhe.jiang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed EAPD and COEF setups for Realtek ALC662/663, 660-VD and 888 codecs.
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Show more exact codec chip name in the PCM stream name strings.
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the support of ALC663 codec, including specific models for
ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V.
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the missing PCI ID for ICH9 controller (8086:2911)
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the new PCI ID 0x6549 0x1200 Teradici controller.
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE to
represent its meaning more better.  This config isn't provided only
for the detection but for more verbose debug prints in general.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Many HD-audio controllers seem inaccurate about the IRQ timing of
PCM period updates.  This has caused problems on audio quality; e.g.
JACK doesn't work with two periods.

This patch fixes the problem by checking the current DMA position
at IRQ handler and delays the period-update via a workq if it's
inaccurate.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

I think that hda_verb array must have "terminator (empty array)".
But alc262_sony_unsol[] does not have it.
And it causes gcc-4.3's buggy behavior
with snd_hda_sequence_write().
Signed-off-by: NAkio Idehara <zbe64533@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use quirk table to assign ALC268_TOSHIBA to COMPAL IFL90/JFL-92 laptops.
No analog output on autoprobe.
Signed-off-by: NTony Vroon <tony@linx.net>
Tested-by: NGuri <gurashka@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The auto-config mode of Realtek ALC codecs has a bug since 2.6.25
that it cannot resume properly.  The problem was the wrong assignment
of init_hook that overrides the whole initialization.

Relevant bug reports:
	http://bugzilla.kernel.org/show_bug.cgi?id=10662
	https://bugzilla.novell.com/show_bug.cgi?id=385473Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Set the proper model for LG LS75 with CM9880 codec.
See ALSA bug#2105:
	https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2105Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The mic pins are wrongly assigned on AD1884A mobile model.
The mic handling is fixed for the automatic mic selection, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix capture mute widget for STAC9250/9251 codecs.  The widget 0x09
has no mute but 0x14 does actually.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Added IDs for the Foxconn P35AX-S mainboard to patch_realtek.c, so
that ALC883_6ST_DIG is used by default.
Signed-off-by: NTravis Place <wishie@wishie.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the missing COEF and EAPD initialization in ALC889 auto-configuration
mode.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We get quite noisy output on the right channel on VT1708 codec
when 24bit samples are used.  Suppress the 24bit support until any
real fix is found.
	https://bugzilla.novell.com/show_bug.cgi?id=390473Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a config table entry for the ASUS P5K-E/WIFI-AP mainboard (ID
1043:8227) to use AD1988_6STACK_DIG
Signed-off-by: NTravis Place <wishie@wishie.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Corrected the model assignment for the ASUS P5GD1 w/SPDIF after reports of
surround sound not being possible.
Signed-off-by: NTravis Place <wishie@wishie.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>