- 06 12月, 2009 5 次提交
-
-
由 Michael Obst 提交于
Signed-off-by: NMichael Obst <mike.obst@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
As pointed out by Hermann Pitton, it turns out that the DTV1000S card's analog entry made it into the #if 0 flyvideo tweaks in saa7134-cards.c and is not valid there. This patch fixes the problem. Cc: hermann pitton <hermann-pitton@arcor.de> Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Thanks to Terry Wu for finding the GPIOs required for svideo / composite input Cc: Terry Wu <terrywu2009@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Danny Wood 提交于
V4L/DVB (13168): Add support for Asus Europa Hybrid DVB-T card (SAA7134 SubVendor ID: 0x1043 Device ID: 0x4847) Adds the device IDs and driver linking to allow the Asus Europa DVB-T card to operate with these drivers. The device has a SAA7134 chipset with a TD1316 Hybrid Tuner. All inputs work on the card including switching between DVB-T and Analogue TV, there is also no IR with this card. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by: NDanny Wood <danwood76@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
Add support for the digital side of the Behold X7 Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 07 11月, 2009 1 次提交
-
-
由 Michael Krufky 提交于
The Hauppauge WinTV HVR-1150 retail boards require the FORCE_TS_VALID bit to be set in order to function properly. This change will work on the early revisions on the board as well, but the final revision will not function without this change. Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 9月, 2009 3 次提交
-
-
由 Dmitry Belimov 提交于
Change tuner type to correct for BeholdTV cards with FM1216MK5. Cc: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Henk Vergonet 提交于
http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner test status analog (PAL-B): - Sometimes picture is noisy, but it becomes crystal clear after switching between channels. (happens for example at 687.25 Mhz) - On a lower frequency (511.25 Mhz) the picture is always sharp, but lacks colour. - No sound problems. - radio untested. Digital: - DVB-T/H stream reception works. - Would expect to see some more channels in the higher frequency region. Overall is the impression that sensitivity still needs improvement both in analog and digital modes. Signed-off-by: NHenk Vergonet <Henk.Vergonet@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr. This simplifies this API substantially. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 12 9月, 2009 8 次提交
-
-
由 Eugene Yudin 提交于
This patch add support for RoverMedia TV Link Pro FM (LR138 REV:I) card based on saa7134. Signed-off-by: NEugene Yudin <Eugene.Yudin@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dmitri Belimov 提交于
Add support our new TV card based on xc5000 and saa7134. Analog TV works well. Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Vasiliy Temnikov 提交于
Added support to AverMedia Studio 505 [dougsland@redhat.com: fixed rejects and removed the change to add dk as default secam variant] [mchehab@redhat.com: fix a few CodingStyle issues] Signed-off-by: NVasiliy Temnikov <vaka@newmail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dmitri Belimov 提交于
Add config of RDS part for the BeholdTV tuners. Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The changeset 0b17d0ed that aded ASUSTeK P7131 Analog were using 7 spaces instead of tab, probably due to some bad cut-and-paste. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
Add Compro VideoMate S350 DVB-S driver. The card uses zl10313, zl10039, saa7130 integrated circuits. Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 hermann pitton 提交于
We have support for radio on saa7133/35/31e cards with tda8290/8275(a) and 5.5MHz ceramic filter on the bridge chips since a while. It was previously not tested, if this card supports it too, but the old "ghost" radio with wrong filters doesn't work anymore. Thanks go to Pham Thanh Nam and Laszlo Kustan for reporting it working on that input. Signed-off-by: Nhermann pitton <hermann-pitton@arcor.de> Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
Define correct tuner in config. Radio now works fine Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 14 8月, 2009 2 次提交
-
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 17 6月, 2009 7 次提交
-
-
由 Barry Kitson 提交于
Add 1461:f736 to the list of identifiers corresponding to the SAA7134_BOARD_AVERMEDIA_M103 board. This patch adds support for a variant of the AVerMedia M103 MiniPCI DVB-T Hybrid card. Signed-off-by: NBarry Kitson <b.kitson@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dmitri Belimov 提交于
1. Add start/stop TS function. 2. Move setup DMA of TS to DMA function. 3. Write support cupture via MMAP 4. Rework startup and finish process, remove simple FSM. Tested-by: NHermann Pitton <hermann-pitton@arcor.de> Tested-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NAlexey Osipov <lion-simba@pridelands.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 hermann pitton 提交于
The Compro VideoMate T750 has no support for IR and DVB-T yet. Disable both to avoid fall through and confusing printouts. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dmitri Belimov 提交于
Split Beholdr`s cards to correct models. Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Oldřich Jedlička 提交于
Here comes the full support for AVerMedia Cardbus Plus (E501R) - including remote control. TV, Composite and FM radio tested, I don't have S-Video to test. I've figured out that the radio works only with xtal frequency 13MHz. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by: NOldřich Jedlička <oldium.pro@seznam.cz> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Shevchenko 提交于
[mchehab@redhat.com: Fix merge conflicts and CodingStyle issues] Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 07 4月, 2009 2 次提交
-
-
由 Matthias Schwarzott 提交于
Thanks to panagonov <panagonov@mail.bg> for requesting support and testing patches. Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on i2c_get_adapdata to return the v4l2_device. However, this is not always possible on embedded platforms. So modify the API to pass the v4l2_device pointer explicitly. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 3月, 2009 12 次提交
-
-
由 Hans Verkuil 提交于
The Terratec Cinergy 600 TV MK3 supports the RDS decoder saa6588. Add support to saa7134 for such devices. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
This card has the saa6752hs on 7-bit address 0x21 instead of 0x20. Add support in the card definition struct to select which address to use and update the definitions accordingly. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
replace occurances of "HVR1150" with "HVR1120" - this was a typo. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Matthias Schwarzott 提交于
Add DVB support for Avermedia DVB-S Pro and Avermedia DVB-S Hybrid+FM card both labled A700. They use zl10313 demod (driver mt312) and zl10036 tuner. [mchehab@redhat.com: change __FUNCTION__ into __func__] Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Oldřich Jedlička 提交于
Added support for I2C device at address 0x40 and subaddress 0x0d/0x0b that provides remote control key reading support for AVerMedia Cardbus Hybrid card, possibly for other AVerMedia Cardbus cards. The I2C address 0x40 doesn't like the SAA7134's 0xfd quirk, so it was disabled. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by: NOldřich Jedlička <oldium.pro@seznam.cz> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Tim Farrington 提交于
Make correction to composite input plus svideo input to Avermedia E506R Signed-off-by: NTim Farrington <timf@iinet.net.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Some saa7134 devices require to open an i2c gate before tuning. This patch fix the initialization for those devices. The nxt200x_gate_ctrl() logic were returned back to the old place, since we don't know how to close the gate. A future pacth could revert that change and provide the proper close gate control, to avoid keeping it open forever. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
On certain devices, before opening a tuner, we need to open the tuner gate via i2c. This patch just moves the tuner probing code to the same place where such i2c commands are handled, to make easier to fix this trouble on later patches. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
saa7134: Fix tuner access on Kworld ATSC110 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlSigned-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Register v4l2_device and switch to v4l2_subdev to access the i2c modules. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-