Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 18 6月, 2013 1 次提交
    • T
      ALSA: hda - Fix return value of snd_hda_check_power_state() · 06ec56d3
      由 Takashi Iwai 提交于 
      The refactoring by commit 9040d102 introduced the new function
snd_hda_check_power_state().  This function is supposed to return true
if the state already reached to the target state, but it actually
returns false for that.  An utterly stupid typo while copy & paste.

Fortunately this didn't influence on much behavior because powering up
AFG usually powers up the child widgets, too.  But the finer power
control must have been broken by this bug.

Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      06ec56d3
  3. 17 6月, 2013 3 次提交
  5. 06 6月, 2013 3 次提交
    • T
      ALSA: hda - Don't take unresponsive D3 transition too serious · 63e51fd7
      由 Takashi Iwai 提交于 
      When a codec is powered off, some systems don't respond properly after
D3 FG transition, while the driver still expects the response and
tries to fall back to different modes (polling and single-cmd).  When
the fallback happens, the driver stays in that mode, and falling back
to the single-cmd mode means it'll loose the unsol event handling,
too.

The unresponsiveness at D3 isn't too serious, thus this fallback is
mostly superfluous.  We can gracefully ignore the error there so that
the driver keeps the normal operation mode.

This patch adds a new bit flag for codec read/write, set in the power
transition stage, which is notified to the controller driver via a new
bus->no_response_fallback flag.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      63e51fd7
    • T
      ALSA: hda - Introduce bit flags to snd_hda_codec_read/write() · e7ecc27e
      由 Takashi Iwai 提交于 
      snd_hda_codec_read(), snd_hda_codec_write() & co take the argument
"direct" that indicates whether the given NID is a direct reference or
an indirect reference.  However, the indirect reference is practically
unimplemented and never exists.  And moreover, we don't need the
indication of indirect reference at this high level, as NID can be
represented in 16bit values at this point.

Meanwhile, there are some cases where it'd be nice to give some
operational options to these functions.  So, we can reuse this
argument as a new bit flag!  Pretty frugal, eh?

All callers so far pass zero to this argument, thus there is no
behavior change by this replacement.

The real usage of this new bit option will be added in the following
patches.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      e7ecc27e
    • T
      ALSA: hda - Drop hard dependency on CONFIG_SND_DYNAMIC_MINORS · 36bb00d4
      由 Takashi Iwai 提交于 
      Currently HDMI codec driver sets the hard dependency (reverse
selection) on CONFIG_SND_DYNAMIC_MINORS because the recent codecs may
support more than two PCMs.  But, this doesn't mean that we need
always this option, since there can be a single PCM stream even with
the modern codecs.

This patch drops the hard dependency again but give more sensible
error message when no enough PCMs are available due to the lack of
this option.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      36bb00d4
  7. 05 6月, 2013 2 次提交
  9. 03 6月, 2013 5 次提交
    • T
      ALSA: hda/via - Clean up duplicated codes · 963afde9
      由 Takashi Iwai 提交于 
      The previous commit was written in the way to make the backport to
3.9.y easier, and left the duplicated open codes intentionally.
Now let's clean up the duplicated codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      963afde9
    • T
      ALSA: hda/via - Fix wrongly cleared pins after suspend on VT1802 · 5a6f294e
      由 Takashi Iwai 提交于 
      VIA driver has a special suspend handling only for VT1802 to reduce
the pop noise.  During the transition to the generic parser, the
behavior of snd_hda_set_pin_ctl() was also changed to modify the
cached values, too.  And this caused a regression where the pin is
still cleared even after the resume (including the resume from power
save), resulting in the silent output.

The fix is simply to replace snd_hda_set_pin_ctl() with the explicit
call of snd_hda_codec_write() again.
Reported-by: NAlex Riesen <raa.lkml@gmail.com>
Cc: <stable@vger.kernel.org> [v3.9]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      5a6f294e
    • T
      ALSA: hda - Add keep_eapd_on flag to generic parser · 05909d5c
      由 Takashi Iwai 提交于 
      VT1802 codec seems to reset EAPD of other pins in the hardware level,
and this was another reason of the silent headphone output on some
machines.  As a workaround, introduce a new flag indicating to keep
the EPAD on to the generic parser, and set it in patch_via.c.
Reported-by: NAlex Riesen <raa.lkml@gmail.com>
Cc: <stable@vger.kernel.org> [v3.9]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      05909d5c
    • T
      ALSA: hda - Allow setting automute/automic hooks after parsing · 77afe0e9
      由 Takashi Iwai 提交于 
      Some codec drivers (VIA codecs and some Realtek fixups) set the
automute and automic hooks after calling
snd_hda_gen_parse_auto_config().  In the current code, the hook
pointers are referred only in snd_hda_gen_parse_auto_config() and
passed to snd_hda_jack_detect_enable_callback(), thus changing the
hook values won't change the actually called callbacks properly.

This patch fixes this bug by setting the static functions as the
primary callback functions for the jack detection, and let them
calling the appropriate hooks dynamically.

Cc: <stable@vger.kernel.org> [v3.9]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      77afe0e9
    • T
      ALSA: hda/via - Disable broken dynamic power control · 087c2e3b
      由 Takashi Iwai 提交于 
      Since the transition to the generic parser, the actual routes used
there don't match always with the assumed static paths in some
set_widgets_power_state callbacks.  This results in the wrong power
setup in the end.  As a temporary workaround, we need to disable the
calls together with the non-functional dynamic power control enum.
Reported-by: NAlex Riesen <raa.lkml@gmail.com>
Cc: <stable@vger.kernel.org> [v3.9]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      087c2e3b
  11. 31 5月, 2013 2 次提交
  13. 29 5月, 2013 1 次提交
    • T
      ALSA: PCI: Remove superfluous pci_set_drvdata(pci, NULL) at remove · 20a24225
      由 Takashi Iwai 提交于 
      As drvdata is cleared to NULL at probe failure or at removal by the
driver core, we don't have to call pci_set_drvdata(pci, NULL) any
longer in each driver.

The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in
hda_intel.c.  Since this function itself releases the card instance,
we need to clear drvdata here as well, so that it won't be released
doubly in the remove callback.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      20a24225
  15. 28 5月, 2013 1 次提交
  17. 17 5月, 2013 1 次提交
  19. 16 5月, 2013 2 次提交
  21. 10 5月, 2013 1 次提交
  23. 08 5月, 2013 1 次提交
    • T
      ALSA: hda - Apply pin-enablement workaround to all Haswell HDMI codecs · 17df3f55
      由 Takashi Iwai 提交于 
      This is a revised patch based on Mengdong Lin's fix patch, which is a
supplement to a previous patch [1611a9c9: ALSA: hda - Add fixup for
Haswell to enable all pin and convertor widgets].

Some Haswell BIOS will disable the 2nd and 3rd pin/covertor widgets
when the HD-A controller changes state from D3 to D0.  So when the
controller resumes after a system or runtime suspend, these widgets
are disabled and programming these widgets to D0 will cause H/W error
and codec will not respond.

In addition, we found out that some BIOS disables the pins at S3
although it shows up at boot.  This confuses the driver utterly, and
the hardware falls into the fatal communication error like the above.

So in this patch, we apply intel_haswell_enable_all_pins() not only as
a fixup to a certain device (with 8086:2010) but to all Haswell
machines.  The codec driver basically assumes that all pins are
exposed, so it's anyway better to see them from the beginning.  Even
if all pins and converters are shown by this call, there should be no
regression in practice: the pin default configurations are still kept,
thus the disabled pins are handled as disabled by the driver
properly.
Signed-off-by: NMengdong Lin <mengdong.lin@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      17df3f55
  25. 07 5月, 2013 1 次提交
    • W
      ALSA: HDA: Fix Oops caused by dereference NULL pointer · 2195b063
      由 Wang YanQing 提交于 
      The interrupt handler azx_interrupt will call azx_update_rirb,
which may call snd_hda_queue_unsol_event, snd_hda_queue_unsol_event
will dereference chip->bus pointer.

The problem is we alloc chip->bus in azx_codec_create
which will be called after we enable IRQ and enable unsolicited
event in azx_probe.

This will cause Oops due dereference NULL pointer. I meet it, good luck:)

[Rearranged the NULL check before the tracepoint and added another
 NULL check of bus->workq -- tiwai]
Signed-off-by: NWang YanQing <udknight@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      2195b063
  27. 04 5月, 2013 1 次提交
  29. 03 5月, 2013 1 次提交
  31. 29 4月, 2013 1 次提交
  33. 25 4月, 2013 1 次提交
  35. 22 4月, 2013 1 次提交
  37. 18 4月, 2013 3 次提交
  39. 17 4月, 2013 1 次提交
  41. 16 4月, 2013 3 次提交
    • T
      ALSA: hda - Use the primary DAC for all aamix outputs · 5ead56f2
      由 Takashi Iwai 提交于 
      When setting up the aamix output paths, use the primary DAC instead of
the individual DAC for each output as default.  Otherwise multiple
DACs will be turned on for a single aamix widget, which results in
doubly or more volumes, because the duplicated signals will be sent
through all these DACs for a single stream.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      5ead56f2
    • T
      ALSA: hda - Fix aamix activation with loopback control on VIA codecs · 65033cc8
      由 Takashi Iwai 提交于 
      When we have a loopback mixer control, this should manage the state
whether the output paths include the aamix or not.  But the current
code blindly initializes the output paths with aamix = true, thus the
aamix is enabled unless the loopback mixer control is changed.

Also, update_aamix_paths() called by the loopback mixer control put
callback invokes snd_hda_activate_path() with aamix = true even for
disabling the mixing.  This leaves the aamix path even though the
loopback control is turned off.

This patch fixes these issues:
- Introduced aamix_default() helper to indicate whether with_aamix is
  true or false as default
- Fix the argument in update_aamix_paths() for disabling loopback
Reported-by: NLydia Wang <LydiaWang@viatech.com.cn>
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      65033cc8
    • D
      ALSA: hda - Add codec delay to the capture time stamp. · ae03bbb8
      由 Dylan Reid 提交于 
      For capture, the delay through the codec contributes to the time stamp
of the sample recorded at the A to D.  Rename the codec time stamp
function appropriately.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      ae03bbb8
  43. 15 4月, 2013 2 次提交
  45. 11 4月, 2013 2 次提交