Signed-off-by: NJiri Olsa <olsajiri@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This will force the snapgear boards to use the on-chip SH RTC instead,
until the rtc-ds1302 driver is merged. The current code is broken
and hasn't built in some time, so just kill it off and get the board
working again.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

We have nothing to do here, but there are continually drivers that
fail to build without it. Stub it in.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Follows the changes of some of the other RTC drivers. If the tm
value is bogus, just zero it out. Adds some sanity for RTC_RD_TIME.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Currently if rtc_device_register() fails we have an IS_ERR() on
the wrong pointer, which causes this to always be skipped. Fix
this up to actually check the right pointer. The return value
was always correct, even though the check was wrong.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Access size to LED is not added on Solution Engine series.
LED doesn't work. Fixed this problem.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

When SH7710 and SH7712 are used, SCI_NPORTS redefined.
Remove it.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

PAGE_KERNEL_PCC() takes two arguments, which weren't reflected in the
nommu case. Fix it up.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This is dead code, and doesn't build anyways. Kill it off.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Now that copy_to_user_page()/copy_from_user_page() are wired up, we
can drop the old __copy_xxx() implementations. Now that the page
colouring scheme has changed via kmap_coherent(), we can avoid the
flush in these specific helpers.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This moves copy_{to,from}_user_page() out-of-line on SH-4 and
converts for the kmap_coherent() API. Based on the MIPS
implementation.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

With the kmap_coherent() API in place, this is trivial to implement,
and lets us avoid the cache flush in certain cases.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The ST40 stuff in-tree hasn't built for some time, and hasn't been
updated for over 3 years. ST maintains their own out-of-tree changes
and rebases occasionally, and that's ultimately where all of the ST40
users go anyways.

In order for the ST40 code to be brought up to date most of the stuff
removed in this changeset would have to be rewritten anyways, so there's
very little benefit in keeping the remnants around either.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Follow the MIPS and sparc64 changes for -Werror instrumentation.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Currently these are only being exported for CONFIG_CPU_SH4. This
invariably breaks when building for an SH-3 that includes multiple
targets in multilib.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This was all reworked some time ago, the old debug_enter was ripped
out with everything going through a debug trap jump table instead.
Kill off the debug_enter target and reference kgdb_handle_exception
directly.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

SH-4A parts generally don't have any use for this, and it requires an
alternate implementation anyways. Leave this as an SH-4 only option,
as that's the only place this has been needed in the past.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

When uImage is made by using 'make uImage', zImage is used.
If zImage is used, the compression method need not be set.
However, it is set for "gzip" for a compression method.
I corrected to set "none".
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Caught by the surprisingly not-entirely-useless 'includecheck'.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The common linux/ptrace.h already defines PTRACE_O_TRACESYSGOOD so there is no
need to have arches do it.  This also keeps glibc-2.7 from breaking since it
has an enum for the PTRACE_O_* flags.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch supports Hitachi Solution Engine (SuperH) of SH7705, SH7710,
SH7712, SH7750S and SH7750R.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Reported by Al Viro.

This fixes it:

     [AC]FLAGS -> KBUILD_[AC]FLAGS conversion in Makefile-i386.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: add missing end-of-options record for trans_fd
  9p: return NULL when trans not found
  9p: use copy of the options value instead of original
  9p: fix memory leak in v9fs_get_sb

The list of options that the fd transport accepts is missing end-of-options
marker. This patch adds it.
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>
Acked-by: NEric Van Hensbergen <ericvh@gmail.com>

v9fs_match_trans function returns arbitrary transport module instead of NULL
when the requested transport is not registered. This patch modifies the
function to return NULL in that case.
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>
Acked-by: NEric Van Hensbergen <ericvh@gmail.com>

v9fs_parse_options function uses strsep which modifies the value of the
v9ses->options field. That modified value is later passed to the function
that creates the transport potentially making the transport creation
function to fail.

This patch creates a copy of v9ses->option field that v9fs_parse_options
function uses instead of the original value.
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>
Acked-by: NEric Van Hensbergen <ericvh@gmail.com>

This patch fixes a memory leak in v9fs_get_sb.
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>
Acked-by: NEric Van Hensbergen <ericvh@gmail.com>

* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: DRM: fix memset size error
  drm: remove remnants of DRM_COPY_FROM/TO_USER_IOCTL
  drm: remove second forward decleration of drm device struct.

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: handle broken cable reporting
  pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detect
  ata_piix: Add additional PCI identifier for 40 wire short cable
  pata_serverworks: Fix problem with some drive combinations
  libata: Don't disable dipm with SET FEATURES
  libata and bogus LBA48 drives

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  phylib: Silence driver registration
  phylib: Add ID for Marvell 88E1240
  82596: free nonexistent resource fix
  SUNHME: Fix missing NETIF_F_VLAN_CHALLENGED on PCI happy meals

The size passing to memset is wrong.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is a bug in the savage driver since I introduced these changes.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@linux.ie>