A little more detail on how and when to poll() /proc/bus/usb/devices.
Signed-off-by: NSam Bishop <sam@bishop.dhs.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Grammar, spelling, and stylistic edits.
Signed-off-by: NSam Bishop <sam@bishop.dhs.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is a re-diffed version of one originally sent by Jan Mate
<mate@fiit.stuba.sk>.
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as781) adds an entry to unusual_devs.h for the Lacie DVD+-RW
drive.  Apparently its USB interface has requirements similar to the
Genesys Logic interface; it doesn't like data to be sent too soon after
a command.

This fixes Bugzilla #6817.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] minor reformatting to vmlinux.lds.S
  [IA64] CMC/CPE: Reverse the order of fetching log and checking poll threshold
  [IA64] PAL calls need physical mode, stacked
  [IA64] ar.fpsr not set on MCA/INIT kernel entry
  [IA64] printing support for MCA/INIT
  [IA64] trim output of show_mem()
  [IA64] show_mem() printk levels
  [IA64] Make gp value point to Region 5 in mca handler
  Revert "[IA64] Unwire set/get_robust_list"
  [IA64] Implement futex primitives
  [IA64-SGI] Do not request DMA memory for BTE
  [IA64] Move perfmon tables from thread_struct to pfm_context
  [IA64] Add interface so modules can discover whether multithreading is on.
  [IA64] kprobes: fixup the pagefault exception caused by probehandlers
  [IA64] kprobe opcode 16 bytes alignment on IA64
  [IA64] esi-support
  [IA64] Add "model name" to /proc/cpuinfo

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (108 commits)
  sh: Fix occasional flush_cache_4096() stack corruption.
  sh: Calculate shm alignment at runtime.
  sh: dma-mapping compile fixes.
  sh: Initial vsyscall page support.
  sh: Clean up PAGE_SIZE definition for assembly use.
  sh: Selective flush_cache_mm() flushing.
  sh: More intelligent entry_mask/way_size calculation.
  sh: Support for L2 cache on newer SH-4A CPUs.
  sh: Update kexec support for API changes.
  sh: Optimized readsl()/writesl() support.
  sh: Report movli.l/movco.l capabilities.
  sh: CPU flags in AT_HWCAP in ELF auxvt.
  sh: Add support for 4K stacks.
  sh: Enable /proc/kcore support.
  sh: stack debugging support.
  sh: select CONFIG_EMBEDDED.
  sh: machvec rework.
  sh: Solution Engine SH7343 board support.
  sh: SH7710VoIPGW board support.
  sh: Enable verbose BUG() support.
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Kill bogus check from bootmem_init().
  [SPARC64]: Update defconfig.

Avoid possible deadlock on a BUG() inside down_write(mmap_sem).  The deadlock
can only occur if something has gone horridly wrong, because a fault here
shouldn't happen.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a version of __get_user() which is safe to call inside mmap_sem.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Ingo Oeser pointed out that because current expands to an inline function
it is more space efficient and somewhat faster to simply keep a cached copy
of current in another variable.  This patch implements that for the
de_thread function.

(akpm: saves nearly 100 bytes of text on x86)
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add missing \n to dprintk
Signed-off-by: NMartin Bligh <mbligh@google.com>
Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With the patches flying between Oleg and myself somehow this temporary
debug code got left in pid.c.  It was never intended to make it to the
stable kernel.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In de_thread we move pids from one process to another, a rather ugly case.
The function transfer_pid makes it clear what we are doing, and makes the
action atomic.  This is useful we ever want to atomically traverse the
process group and session lists, in a rcu safe manner.

Even if the atomic properties this change should be a win as transfer_pid
should be less code to execute than executing both attach_pid and
detach_pid, and this should make de_thread slightly smaller as only a
single function call needs to be emitted.  The only downside is that the
code might be slower to execute as the odds are against transfer_pid being
in cache.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since sys_sysctl is deprecated start allow it to be compiled out.  This
should catch any remaining user space code that cares, and paves the way
for further sysctl cleanups.

[akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning]
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Simpler, cleaner.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The param section is an array of "kernel_param" structures, storing only
constant data: pointer to name, permission of the variable pointed to by
(void *)arg and pointers to set/get methods.

Move end_rodata down to include __param section in the read-only range used
by CONFIG_DEBUG_RODATA.
Signed-off-by: NMarcelo Tosatti <marcelo@kvack.org>
Acked-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

free_fdset(NULL, ...) is legal.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add modalias attribute support for the almost forgotten now EISA bus and
(at least some) EISA-aware modules.

The modalias entry looks like (for an 3c509 NIC):

 eisa:sTCM5093

and the in-module alias like:

 eisa:sTCM5093*

The patch moves struct eisa_device_id declaration from include/linux/eisa.h
to include/linux/mod_devicetable.h (so that the former now #includes the
latter), adds proper MODULE_DEVICE_TABLE(eisa, ...) statements for all
drivers with EISA IDs I found (some drivers already have that DEVICE_TABLE
declared), and adds recognision of __mod_eisa_device_table to
scripts/mod/file2alias.c so that proper modules.alias will be generated.

There's no support for /lib/modules/$kver/modules.eisamap, as it's not used
by any existing tools, and because with in-kernel modalias mechanism those
maps are obsolete anyway.

The rationale for this patch is:

 a) to make EISA bus to act as other busses with modalias
    support, to unify driver loading

 b) to foget about EISA finally - with this patch, kernel
    (who still supports EISA) will be the only one who knows
    how to choose the necessary drivers for this bus ;)

[akpm@osdl.org: fix the kbuild bit]
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-the-net-bits-by: NJeff Garzik <jeff@garzik.org>
Acked-the-tulip-bit-by: NValerie Henson <val_henson@linux.intel.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Consistently use MAX_ERRNO when checking for errors in __syscall_return().

[ralf@linux-mips.org: build fix]
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

IA32 manual says if micorcode update's size is 0, then the size is
default size (2048 bytes). But this doesn't suggest all microcode
update's size should be above 2048 bytes to me. We actually had a
microcode update whose size is 1024 bytes. The patch just removed the
check.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Cc: Tigran Aivazian <tigran@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add sysfs support.  Currently each CPU has three microcode related
attributes.  One is 'version' which shows current ucode version of CPU.
Tools can use the attribute do validation or show CPU ucode status.  one is
'reload' which allows manually reloading ucode.  Another is
'processor_flags', which exports processor flags, so we can write tools to
check if CPU has latest ucode.  Also add suspend/resume and CPU hotplug
support.

[akpm@osdl.org: cleanups, build fix]
[bunk@stusta.de: Kconfig fixes]
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Acked-by: NTigran Aivazian <tigran@veritas.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Using request_firmware to pull ucode from userspace, so we don't need the
application 'microcode_ctl' to assist.  We name each ucode file according
to CPU's info as intel-ucode/family-model-stepping.  In this way we could
split ucode file as small one.  This has a lot of advantages such as
selectively update and validate microcode for specific models, better
manage microcode file, easily write tools for administerators and so on.
with the changes, we should put all intel-ucode/xx-xx-xx microcode files
into the firmware dir (I had a tool to split previous big data file into
small one and later we will release new style data file).  The init script
should be changed to just loading the driver without unloading
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Acked-by: NTigran Aivazian <tigran@veritas.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up microcode update driver and make it more readable.

[akpm@osdl.org: cleanups]
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Acked-by: NTigran Aivazian <tigran@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since the nolargeio option no longer has any effect, print a warning
instead of setting a write-only variable.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Cc: Hans Reiser <reiser@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This eliminates the i_blksize field from struct inode.  Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.

Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.

[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the i_cdev pointer in struct inode into a union.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the i_bdev pointer in struct inode into a union.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the i_pipe pointer into a union that will be shared with i_bdev and
i_cdev.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patches reduce the size of the VFS inode structure by 28 bytes
on a UP x86.  (It would be more on an x86_64 system).  This is a 10% reduction
in the inode size on a UP kernel that is configured in a production mode
(i.e., with no spinlock or other debugging functions enabled; if you want to
save memory taken up by in-core inodes, the first thing you should do is
disable the debugging options; they are responsible for a huge amount of bloat
in the VFS inode structure).

This patch:

The filesystem or device-specific pointer in the inode is inside a union,
which is pretty pointless given that all 30+ users of this field have been
using the void pointer.  Get rid of the union and rename it to i_private, with
a comment to explain who is allowed to use the void pointer.  This is just a
cleanup, but it allows us to reuse the union 'u' for something something where
the union will actually be used.

[judith@osdl.org: powerpc build fix]
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NJudith Lebzelter <judith@osdl.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

get_blocks() was removed.  So, this removes it on fat, and will take
advantage of the multi block mapping.
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Resetting the devices during driver initialization can be a costly
operation in terms of time (especially scsi devices).  This option can be
used by drivers to know that user forcibly wants the devices to be reset
during initialization.

This option can be useful while kernel is booting in unreliable
environment.  For ex.  during kdump boot where devices are in unknown
random state and BIOS execution has been skipped.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For a long time now I have had a problem with not being able to return a
lookup failure on an existsing directory.  In autofs this corresponds to a
mount failure on a autofs managed mount entry that is browsable (and so the
mount point directory exists).

While this problem has been present for a long time I've avoided resolving
it because it was not very visible.  But now that autofs v5 has "mount and
expire on demand" of nested multiple mounts, such as is found when mounting
an export list from a server, solving the problem cannot be avoided any
longer.

I've tried very hard to find a way to do this entirely within the autofs4
module but have not been able to find a satisfactory way to achieve it.

So, I need to propose a change to the VFS.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix an instance of ptr=alloc(sizeof(ptr)).  Grepping showed no more instances
of this pattern.

Also fixed the formatting in the area.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

um_timer shouldn't add local_offset to the host time since get_time already
did it.  This threw off sleep when a settimeofday or equivalent had happened.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some modules need strnlen_user_skas.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move some foo_kern.c files to foo.c now that the old foo.c files are out
of the way.

Also cleaned up some whitespace and an emacs formatting comment.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

fork on UML has always somewhat subtle.  The underlying cause has been the
need to initialize a stack for the new process.  The only portable way to
initialize a new stack is to set it as the alternate signal stack and take a
signal.  The signal handler does whatever initialization is needed and jumps
back to the original stack, where the fork processing is finished.  The basic
context switching mechanism is a jmp_buf for each process.  You switch to a
new process by longjmping to its jmp_buf.

Now that UML has its own implementation of setjmp and longjmp, and I can poke
around inside a jmp_buf without fear that libc will change the structure, a
much simpler mechanism is possible.  The jmpbuf can simply be initialized by
hand.

This eliminates -
	the need to set up and remove the alternate signal stack
	sending and handling a signal
	the signal blocking needed around the stack switching, since
there is no stack switching
	setting up the jmp_buf needed to jump back to the original
stack after the new one is set up

In addition, since jmp_buf is now defined by UML, and not by libc, it can be
embedded in the thread struct.  This makes it unnecessary to have it exist on
the stack, where it used to be.  It also simplifies interfaces, since the
switch jmp_buf used to be a void * inside the thread struct, and functions
which took it as an argument needed to define a jmp_buf variable and assign it
from the void *.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mark a symbol and file as being tt-mode only.  This shrinks the binary
slightly when tt mode support is compiled out and makes it easier to identity
stuff when tt mode is removed.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>