cgroup_pidlist locking is needlessly complicated.  It has outer
cgroup->pidlist_mutex to protect the list of pidlists associated with
a cgroup and then each pidlist has rwsem to synchronize updates and
reads.  Given that the only read access is from seq_file operations
which are always invoked back-to-back, the rwsem is a giant overkill.
All it does is adding unnecessary complexity.

This patch removes cgroup_pidlist->rwsem and protects all accesses to
pidlists belonging to a cgroup with cgroup->pidlist_mutex.
pidlist->rwsem locking is removed if it's nested inside
cgroup->pidlist_mutex; otherwise, it's replaced with
cgroup->pidlist_mutex locking.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Rename cgroup_pidlist_find() to cgroup_pidlist_find_create() and
separate out finding proper to cgroup_pidlist_find().  Also, move
locking to the caller.

This patch is preparation for pidlist restructure and doesn't
introduce any behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

For pidlist files, seq_file->private pointed to the loaded
cgroup_pidlist; however, pidlist loading is planned to be moved to
cgroup_pidlist_start() for kernfs conversion and seq_file->private
needs to carry more information from open to allow that.

This patch introduces struct cgroup_pidlist_open_file which contains
type, cgrp and pidlist and updates pidlist seq_file->private to point
to it using seq_open_private() and seq_release_private().  Note that
this eventually will be replaced by kernfs_open_file.

While this patch makes more information available to seq_file
operations, they don't use it yet and this patch doesn't introduce any
behavior changes except for allocation of the extra private struct.

v2: use __seq_open_private() instead of seq_open_private() for brevity
    as suggested by Li.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, pidlists are reference counted from file open and release
methods.  This means that holding onto an open file may waste memory
and reads may return data which is very stale.  Both aren't critical
because pidlists are keyed and shared per namespace and, well, the
user isn't supposed to have large delay between open and reads.

cgroup is planned to be converted to use kernfs and it'd be best if we
can stick to just the seq_file operations - start, next, stop and
show.  This can be achieved by loading pidlist on demand from start
and release with time delay from stop, so that consecutive reads don't
end up reloading the pidlist on each iteration.  This would remove the
need for hooking into open and release while also avoiding issues with
holding onto pidlist for too long.

This patch implements delayed release of pidlist.  As pidlists could
be lingering on cgroup removal waiting for the timer to expire, cgroup
free path needs to queue the destruction work item immediately and
flush.  As those work items are self-destroying, each work item can't
be flushed directly.  A new workqueue - cgroup_pidlist_destroy_wq - is
added to serve as flush domain.

Note that this patch just adds delayed release on top of the current
implementation and doesn't change where pidlist is loaded and
released.  Following patches will make those changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Now that pidlist files don't use cftype->release(), it doesn't have
any user left.  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, cgroup_pidlist_open() skips seq_open() and pidlist loading
if the file is opened write-only, which is a sensible optimization as
pidlist loading can be costly and there often are occasions where
tasks or cgroup.procs is opened write-only.  However, pidlist init and
release are planned to be moved to cgroup_pidlist_start/stop()
respectively which would make this optimization unnecessary.

This patch removes the optimization and always fully initializes
pidlist files regardless of open mode.  This will help moving pidlist
handling to start/stop by unifying rw paths and removes the need for
specifying cftype->release() in addition to .release in
cgroup_pidlist_operations as file->f_op is now always overridden.  As
pidlist files were the only user of cftype->release(), the next patch
will remove the method.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Pull to receive e605b365 ("cgroup: fix cgroup_subsys_state leak
for seq_files") as for-3.14 is scheduled to have a lot of changes
which depend on it.
Signed-off-by: NTejun Heo <tj@kernel.org>

If a cgroup file implements either read_map() or read_seq_string(),
such file is served using seq_file by overriding file->f_op to
cgroup_seqfile_operations, which also overrides the release method to
single_release() from cgroup_file_release().

Because cgroup_file_open() didn't use to acquire any resources, this
used to be fine, but since f7d58818 ("cgroup: pin
cgroup_subsys_state when opening a cgroupfs file"), cgroup_file_open()
pins the css (cgroup_subsys_state) which is put by
cgroup_file_release().  The patch forgot to update the release path
for seq_files and each open/release cycle leaks a css reference.

Fix it by updating cgroup_file_release() to also handle seq_files and
using it for seq_file release path too.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v3.12

Juri hit the below lockdep report:

[    4.303391] ======================================================
[    4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[    4.303394] 3.12.0-dl-peterz+ #144 Not tainted
[    4.303395] ------------------------------------------------------
[    4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[    4.303399]  (&p->mems_allowed_seq){+.+...}, at: [<ffffffff8114e63c>] new_slab+0x6c/0x290
[    4.303417]
[    4.303417] and this task is already holding:
[    4.303418]  (&(&q->__queue_lock)->rlock){..-...}, at: [<ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100
[    4.303431] which would create a new lock dependency:
[    4.303432]  (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...}
[    4.303436]

[    4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[    4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 {
[    4.303922]    HARDIRQ-ON-W at:
[    4.303923]                     [<ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0
[    4.303926]                     [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[    4.303929]                     [<ffffffff81063dd6>] kthreadd+0x86/0x180
[    4.303931]                     [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[    4.303933]    SOFTIRQ-ON-W at:
[    4.303933]                     [<ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0
[    4.303935]                     [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[    4.303940]                     [<ffffffff81063dd6>] kthreadd+0x86/0x180
[    4.303955]                     [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[    4.303959]    INITIAL USE at:
[    4.303960]                    [<ffffffff8108a884>] __lock_acquire+0x344/0x1ff0
[    4.303963]                    [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[    4.303966]                    [<ffffffff81063dd6>] kthreadd+0x86/0x180
[    4.303969]                    [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[    4.303972]  }

Which reports that we take mems_allowed_seq with interrupts enabled. A
little digging found that this can only be from
cpuset_change_task_nodemask().

This is an actual deadlock because an interrupt doing an allocation will
hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin
forever waiting for the write side to complete.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Mel Gorman <mgorman@suse.de>
Reported-by: NJuri Lelli <juri.lelli@gmail.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Tested-by: NJuri Lelli <juri.lelli@gmail.com>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org

Merge v3.12 based patch series to move cgroup_event implementation to
memcg into for-3.14.  The following two commits cause a conflict in
kernel/cgroup.c

  2ff2a7d0 ("cgroup: kill css_id")
  79bd9814 ("cgroup, memcg: move cgroup_event implementation to memcg")

Each patch removes a struct definition from kernel/cgroup.c.  As the
two are adjacent, they cause a context conflict.  Easily resolved by
removing both structs.
Signed-off-by: NTejun Heo <tj@kernel.org>

Now that cgroup_event is made memcg specific, the temporarily exported
functions are no longer necessary.  Unexport cgroup_css() and remove
__file_cft() which doesn't have any user left.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>

cgroup_event is only available in memcg now.  Let's brand it that way.
While at it, add a comment encouraging deprecation of the feature and
remove the respective section from cgroup documentation.

This patch is cosmetic.

v3: Typo update as per Li Zefan.

v2: Index in cgroups.txt updated accordingly as suggested by Li Zefan.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>

cgroup_event is now memcg specific.  Replace cgroup_event->css with
->memcg and convert [un]register_event() callbacks to take mem_cgroup
pointer instead of cgroup_subsys_state one.  This simplifies the code
slightly and makes css_to_vmpressure() unnecessary which is removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>

The only use of cgroup_event->cft is distinguishing "usage_in_bytes"
and "memsw.usgae_in_bytes" for mem_cgroup_usage_[un]register_event(),
which can be done by adding an explicit argument to the function and
implementing two wrappers so that the two cases can be distinguished
from the function alone.

Remove cgroup_event->cft and the related code including
[un]register_events() methods.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>

cgroup_event is being moved from cgroup core to memcg and the
implementation is already moved by the previous patch.  This patch
moves the data fields and callbacks.

* cgroup->event_list[_lock] are moved to mem_cgroup.

* cftype->[un]register_event() are moved to cgroup_event.  This makes
  it impossible for individual cftype definitions to specify their
  event callbacks.  This is worked around by simply hard-coding
  filename to event callback mapping in cgroup_write_event_control().
  This is awkward and inflexible, which is actually desirable given
  that we don't want to grow more usages of this feature.

* eventfd_ctx declaration is removed from cgroup.h, which makes
  vmpressure.h miss eventfd_ctx declaration.  Include eventfd.h from
  vmpressure.h.

v2: Use file name from dentry instead of cftype.  This will allow
    removing all cftype handling in the function.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>

@css for cgroup_write_event_control() is now always for memcg and the
target file should be a memcg file too.  Drop code which assumes @css
is dummy_css and the target file may belong to different subsystems.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>

cgroup_event is way over-designed and tries to build a generic
flexible event mechanism into cgroup - fully customizable event
specification for each user of the interface.  This is utterly
unnecessary and overboard especially in the light of the planned
unified hierarchy as there's gonna be single agent.  Simply generating
events at fixed points, or if that's too restrictive, configureable
cadence or single set of configureable points should be enough.

Thankfully, memcg is the only user and gets to keep it.  Replacing it
with something simpler on sane_behavior is strongly recommended.

This patch moves cgroup_event and "cgroup.event_control"
implementation to mm/memcontrol.c.  Clearing of events on cgroup
destruction is moved from cgroup_destroy_locked() to
mem_cgroup_css_offline(), which shouldn't make any noticeable
difference.

cgroup_css() and __file_cft() are exported to enable the move;
however, this will soon be reverted once the event code is updated to
be memcg specific.

Note that "cgroup.event_control" will now exist only on the hierarchy
with memcg attached to it.  While this change is visible to userland,
it is unlikely to be noticeable as the file has never been meaningful
outside memcg.

Aside from the above change, this is pure code relocation.

v2: Per Li Zefan's comments, init/Kconfig updated accordingly and
    poll.h inclusion moved from cgroup.c to memcontrol.c.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>

Since be445626 ("cgroup: remove synchronize_rcu() from
cgroup_diput()"), cgroup destruction path makes use of workqueue.  css
freeing is performed from a work item from that point on and a later
commit, ea15f8cc ("cgroup: split cgroup destruction into two
steps"), moves css offlining to workqueue too.

As cgroup destruction isn't depended upon for memory reclaim, the
destruction work items were put on the system_wq; unfortunately, some
controller may block in the destruction path for considerable duration
while holding cgroup_mutex.  As large part of destruction path is
synchronized through cgroup_mutex, when combined with high rate of
cgroup removals, this has potential to fill up system_wq's max_active
of 256.

Also, it turns out that memcg's css destruction path ends up queueing
and waiting for work items on system_wq through work_on_cpu().  If
such operation happens while system_wq is fully occupied by cgroup
destruction work items, work_on_cpu() can't make forward progress
because system_wq is full and other destruction work items on
system_wq can't make forward progress because the work item waiting
for work_on_cpu() is holding cgroup_mutex, leading to deadlock.

This can be fixed by queueing destruction work items on a separate
workqueue.  This patch creates a dedicated workqueue -
cgroup_destroy_wq - for this purpose.  As these work items shouldn't
have inter-dependencies and mostly serialized by cgroup_mutex anyway,
giving high concurrency level doesn't buy anything and the workqueue's
@max_active is set to 1 so that destruction work items are executed
one by one on each CPU.

Hugh Dickins: Because cgroup_init() is run before init_workqueues(),
cgroup_destroy_wq can't be allocated from cgroup_init().  Do it from a
separate core_initcall().  In the future, we probably want to reorder
so that workqueue init happens before cgroup_init().
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NHugh Dickins <hughd@google.com>
Reported-by: NShawn Bohrer <shawn.bohrer@gmail.com>
Link: http://lkml.kernel.org/r/20131111220626.GA7509@sbohrermbp13-local.rgmadvisors.com
Link: http://lkml.kernel.org/g/alpine.LNX.2.00.1310301606080.2333@eggly.anvils
Cc: stable@vger.kernel.org # v3.9+

Merge tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull minor eCryptfs fix from Tyler Hicks:
 "Quiet static checkers by removing unneeded conditionals"

* tag 'ecryptfs-3.13-rc1-quiet-checkers' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: file->private_data is always valid

Pull second set of sound fixes from Takashi Iwai:
 "A collection of small fixes in HD-audio quirks and runtime PM, ASoC
  rcar, abs8500 and other codecs.  Most of commits are for stable
  kernels, too"

* tag 'sound-fix2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Set current_headset_type to ALC_HEADSET_TYPE_ENUM (janitorial)
  ALSA: hda - Provide missing pin configs for VAIO with ALC260
  ALSA: hda - Add headset quirk for Dell Inspiron 3135
  ALSA: hda - Fix the headphone jack detection on Sony VAIO TX
  ALSA: hda - Fix missing bass speaker on ASUS N550
  ALSA: hda - Fix unbalanced runtime PM notification at resume
  ASoC: arizona: Set FLL to free-run before disabling
  ALSA: hda - A casual Dell Headset quirk
  ASoC: rcar: fixup dma_async_issue_pending() timing
  ASoC: rcar: off by one in rsnd_scu_set_route()
  ASoC: wm5110: Add post SYSCLK register patch for rev D chip
  ASoC: ab8500: Revert to using custom I/O functions
  ALSA: hda - Also enable mute/micmute LED control for "Lenovo dock" fixup
  ALSA: firewire-lib: include sound/asound.h to refer to snd_pcm_format_t
  ALSA: hda - Select FW_LOADER from CONFIG_SND_HDA_CODEC_CA0132_DSP
  ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Realtek codec
  ASoC: rcar: fixup mod access before checking

Pull DRM fixes from Dave Airlie:
 "I was going to leave this until post -rc1 but sysfs fixes broke
  hotplug in userspace, so I had to fix it harder, otherwise a set of
  pulls from intel, radeon and vmware,

  The vmware/ttm changes are bit larger but since its early and they are
  unlikely to break anything else I put them in, it lets vmware work
  with dri3"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (36 commits)
  drm/sysfs: fix hotplug regression since lifetime changes
  drm/exynos: g2d: fix memory leak to userptr
  drm/i915: Fix gen3 self-refresh watermarks
  drm/ttm: Remove set_need_resched from the ttm fault handler
  drm/ttm: Don't move non-existing data
  drm/radeon: hook up backlight functions for CI and KV family.
  drm/i915: Replicate BIOS eDP bpp clamping hack for hsw
  drm/i915: Do not enable package C8 on unsupported hardware
  drm/i915: Hold pc8 lock around toggling pc8.gpu_idle
  drm/i915: encoder->get_config is no longer optional
  drm/i915/tv: add ->get_config callback
  drm/radeon/cik: Add macrotile mode array query
  drm/radeon/cik: Return backend map information to userspace
  drm/vmwgfx: Make vmwgfx dma buffers prime aware
  drm/vmwgfx: Make surfaces prime-aware
  drm/vmwgfx: Hook up the prime ioctls
  drm/ttm: Add a minimal prime implementation for ttm base objects
  drm/vmwgfx: Fix false lockdep warning
  drm/ttm: Allow execbuf util reserves without ticket
  drm/i915: restore the early forcewake cleanup
  ...

Pull PCI updates from Bjorn Helgaas:
 "Miscellaneous
   - Remove duplicate disable from pcie_portdrv_remove() (Yinghai Lu)
   - Fix whitespace, capitalization, and spelling errors (Bjorn Helgaas)"

* tag 'pci-v3.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove()
  PCI: Fix whitespace, capitalization, and spelling errors

Pull SCSI target updates from Nicholas Bellinger:
 "Things have been quiet this round with mostly bugfixes, percpu
  conversions, and other minor iscsi-target conformance testing changes.

  The highlights include:

   - Add demo_mode_discovery attribute for iscsi-target (Thomas)
   - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation
   - Add send completion interrupt coalescing for ib_isert
   - Convert target-core to use percpu-refcounting for se_lun
   - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn
   - tcm_loop updates (Hannes)
   - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes)

  v3.14 is currently shaping to be a busy development cycle in target
  land, with initial support for T10 Referrals and T10 DIF currently on
  the roadmap"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
  iscsi-target: chap auth shouldn't match username with trailing garbage
  iscsi-target: fix extract_param to handle buffer length corner case
  iscsi-target: Expose default_erl as TPG attribute
  target_core_configfs: split up ALUA supported states
  target_core_alua: Make supported states configurable
  target_core_alua: Store supported ALUA states
  target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED
  target_core_alua: spellcheck
  target core: rename (ex,im)plict -> (ex,im)plicit
  percpu-refcount: Add percpu-refcount.o to obj-y
  iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN
  iscsi-target: Convert iscsi_session statistics to atomic_long_t
  target: Convert se_device statistics to atomic_long_t
  target: Fix delayed Task Aborted Status (TAS) handling bug
  iscsi-target: Reject unsupported multi PDU text command sequence
  ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call
  iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn
  target: Core does not need blkdev.h
  target: Pass through I/O topology for block backstores
  iser-target: Avoid using FRMR for single dma entry requests
  ...

Pull hwmon fixes from Guenter Roeck:
 - acpi_power_meter: Fix return value check from call to
   acpi_bus_get_device
 - nct6775: Fix/improve NCT6791 support
 - lm75: Add support for GMT G751

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (acpi_power_meter) Fix acpi_bus_get_device() return value check
  hwmon: (nct6775) NCT6791 supports weight control only for CPUFAN
  hwmon: (nct6775) Monitor additional temperature registers
  hwmon: (lm75) Add support for GMT G751 chip

Pull networking fixes from David Miller:

 1) Fix memory leaks and other issues in mwifiex driver, from Amitkumar
    Karwar.

 2) skb_segment() can choke on packets using frag lists, fix from
    Herbert Xu with help from Eric Dumazet and others.

 3) IPv4 output cached route instantiation properly handles races
    involving two threads trying to install the same route, but we
    forgot to propagate this logic to input routes as well.  Fix from
    Alexei Starovoitov.

 4) Put protections in place to make sure that recvmsg() paths never
    accidently copy uninitialized memory back into userspace and also
    make sure that we never try to use more that sockaddr_storage for
    building the on-kernel-stack copy of a sockaddr.  Fixes from Hannes
    Frederic Sowa.

 5) R8152 driver transmit flow bug fixes from Hayes Wang.

 6) Fix some minor fallouts from genetlink changes, from Johannes Berg
    and Michael Opdenacker.

 7) AF_PACKET sendmsg path can race with netdevice unregister notifier,
    fix by using RCU to make sure the network device doesn't go away
    from under us.  Fix from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  gso: handle new frag_list of frags GRO packets
  genetlink: fix genl_set_err() group ID
  genetlink: fix genlmsg_multicast() bug
  packet: fix use after free race in send path when dev is released
  xen-netback: stop the VIF thread before unbinding IRQs
  wimax: remove dead code
  net/phy: Add the autocross feature for forced links on VSC82x4
  net/phy: Add VSC8662 support
  net/phy: Add VSC8574 support
  net/phy: Add VSC8234 support
  net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage)
  net: rework recvmsg handler msg_name and msg_namelen logic
  bridge: flush br's address entry in fdb when remove the
  net: core: Always propagate flag changes to interfaces
  ipv4: fix race in concurrent ip_route_input_slow()
  r8152: fix incorrect type in assignment
  r8152: support stopping/waking tx queue
  r8152: modify the tx flow
  r8152: fix tx/rx memory overflow
  netfilter: ebt_ip6: fix source and destination matching
  ...

Pull ARM fixes from Russell King:
 "Some small fixes for this merge window, most of them quite self
  explanatory - the biggest thing here is a fix for the ARMv7 LPAE
  suspend/resume support"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7894/1: kconfig: select GENERIC_CLOCKEVENTS if HAVE_ARM_ARCH_TIMER
  ARM: 7893/1: bitops: only emit .arch_extension mp if CONFIG_SMP
  ARM: 7892/1: Fix warning for V7M builds
  ARM: 7888/1: seccomp: not compatible with ARM OABI
  ARM: 7886/1: make OABI default to off
  ARM: 7885/1: Save/Restore 64-bit TTBR registers on LPAE suspend/resume
  ARM: 7884/1: mm: Fix ECC mem policy printk
  ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE
  ARM: 7882/1: mm: fix __phys_to_virt to work with 64 bit phys_addr_t in BE case
  ARM: 7881/1: __fixup_smp read of SCU config should do byteswap in BE case
  ARM: Fix nommu.c build warning

Pull KVM fixes from Gleb Natapov.

* 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: kvm_clear_guest_page(): fix empty_zero_page usage
  kvm: mmu: delay mmu audit activation
  arm/arm64: KVM: Fix hyp mappings of vmalloc regions

Pull aio fixes from Benjamin LaHaise.

* git://git.kvack.org/~bcrl/aio-next:
  aio: nullify aio->ring_pages after freeing it
  aio: prevent double free in ioctx_alloc
  aio: Fix a trinity splat

Pull nfsd bugfixes from Bruce Fields:
 "A couple nfsd bugfixes"

* 'for-3.13' of git://linux-nfs.org/~bfields/linux:
  nfsd4: fix xdr decoding of large non-write compounds
  nfsd: make sure to balance get/put_write_access
  nfsd: split up nfsd_setattr

Pull GFS2 fixes from Steven Whitehouse:
 "A couple of small, but important bug fixes for GFS2.  The first one
  fixes a possible NULL pointer dereference, and the second one resolves
  a reference counting issue in one of the lesser used paths through
  atomic_open"

* tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Fix ref count bug relating to atomic_open
  GFS2: fix potential NULL pointer dereference

Pull btrfs fixes from Chris Mason:
 "Almost all of these are bug fixes.  Dave Sterba's documentation update
  is the big exception because he removed our promises to set any
  machine running Btrfs on fire"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Documentation: filesystems: update btrfs tools section
  Documentation: filesystems: add new btrfs mount options
  btrfs: update kconfig help text
  btrfs: fix bio_size_ok() for max_sectors > 0xffff
  btrfs: Use trace condition for get_extent tracepoint
  btrfs: fix typo in the log message
  Btrfs: fix list delete warning when removing ordered root from the list
  Btrfs: print bytenr instead of page pointer in check-int
  Btrfs: remove dead codes from ctree.h
  Btrfs: don't wait for ordered data outside desired range
  Btrfs: fix lockdep error in async commit
  Btrfs: avoid heavy operations in btrfs_commit_super
  Btrfs: fix __btrfs_start_workers retval
  Btrfs: disable online raid-repair on ro mounts
  Btrfs: do not inc uncorrectable_errors counter on ro scrubs
  Btrfs: only drop modified extents if we logged the whole inode
  Btrfs: make sure to copy everything if we rename
  Btrfs: don't BUG_ON() if we get an error walking backrefs

Pull second xfs update from Ben Myers:
 "There are a couple of patches that I wasn't quite sure about in time
  for our initial 3.13 pull request, a bugfix, and an update to add Dave
  to MAINTAINERS:

  Here we have a performance fix for inode iversion, increased inode
  cluster size for v5 superblock filesystems, a fix for error handling
  in xfs_bmap_add_attrfork, and a MAINTAINERS update to add Dave"

* tag 'xfs-for-linus-v3.13-rc1-2' of git://oss.sgi.com/xfs/xfs:
  xfs: open code inc_inode_iversion when logging an inode
  xfs: increase inode cluster size for v5 filesystems
  xfs: fix unlock in xfs_bmap_add_attrfork
  xfs: update maintainers

Pull SLAB changes from Pekka Enberg:
 "The patches from Joonsoo Kim switch mm/slab.c to use 'struct page' for
  slab internals similar to mm/slub.c.  This reduces memory usage and
  improves performance:

    https://lkml.org/lkml/2013/10/16/155

  Rest of the changes are bug fixes from various people"

* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: (21 commits)
  mm, slub: fix the typo in mm/slub.c
  mm, slub: fix the typo in include/linux/slub_def.h
  slub: Handle NULL parameter in kmem_cache_flags
  slab: replace non-existing 'struct freelist *' with 'void *'
  slab: fix to calm down kmemleak warning
  slub: proper kmemleak tracking if CONFIG_SLUB_DEBUG disabled
  slab: rename slab_bufctl to slab_freelist
  slab: remove useless statement for checking pfmemalloc
  slab: use struct page for slab management
  slab: replace free and inuse in struct slab with newly introduced active
  slab: remove SLAB_LIMIT
  slab: remove kmem_bufctl_t
  slab: change the management method of free objects of the slab
  slab: use __GFP_COMP flag for allocating slab pages
  slab: use well-defined macro, virt_to_slab()
  slab: overloading the RCU head over the LRU for RCU free
  slab: remove cachep in struct slab_rcu
  slab: remove nodeid in struct slab
  slab: remove colouroff in struct slab
  slab: change return type of kmem_getpages() to struct page
  ...

Pull third set of powerpc updates from Benjamin Herrenschmidt:
 "This is a small collection of random bug fixes and a few improvements
  of Oops output which I deemed valuable enough to include as well.

  The fixes are essentially recent build breakage and regressions, and a
  couple of older bugs such as the DTL log duplication, the EEH issue
  with PCI_COMMAND_MASTER and the problem with small contexts passed to
  get/set_context with VSX enabled"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/signals: Mark VSX not saved with small contexts
  powerpc/pseries: Fix SMP=n build of rng.c
  powerpc: Make cpu_to_chip_id() available when SMP=n
  powerpc/vio: Fix a dma_mask issue of vio
  powerpc: booke: Fix build failures
  powerpc: ppc64 address space capped at 32TB, mmap randomisation disabled
  powerpc: Only print PACATMSCRATCH in oops when TM is active
  powerpc/pseries: Duplicate dtl entries sometimes sent to userspace
  powerpc: Remove a few lines of oops output
  powerpc: Print DAR and DSISR on machine check oopses
  powerpc: Fix __get_user_pages_fast() irq handling
  powerpc/eeh: More accurate log
  powerpc/eeh: Enable PCI_COMMAND_MASTER for PCI bridges

current_headset_type should be of the HEADSET_TYPE enum, not the
HEADSET_MODE enum. Since ALC_HEADSET_TYPE_UNKNOWN and ALC_HEADSET_MODE_UNKNOWN
are both 0, this patch is just janitorial.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some models (or maybe depending on BIOS version) of Sony VAIO with
ALC260 give no proper pin configurations as default, resulting in the
non-working speaker, etc.  Just provide the whole pin configurations
via a fixup.
Reported-by: NMatthew Markus <mmarkus@hearit.co>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge patches from Andrew Morton:
 "13 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: place page->pmd_huge_pte to right union
  MAINTAINERS: add keyboard driver to Hyper-V file list
  x86, mm: do not leak page->ptl for pmd page tables
  ipc,shm: correct error return value in shmctl (SHM_UNLOCK)
  mm, mempolicy: silence gcc warning
  block/partitions/efi.c: fix bound check
  ARM: drivers/rtc/rtc-at91rm9200.c: disable interrupts at shutdown
  mm: hugetlbfs: fix hugetlbfs optimization
  kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS cleanly
  ipc,shm: fix shm_file deletion races
  mm: thp: give transparent hugepage code a separate copy_page
  checkpatch: fix "Use of uninitialized value" warnings
  configfs: fix race between dentry put and lookup

Pull security subsystem updates from James Morris:
 "In this patchset, we finally get an SELinux update, with Paul Moore
  taking over as maintainer of that code.

  Also a significant update for the Keys subsystem, as well as
  maintenance updates to Smack, IMA, TPM, and Apparmor"

and since I wanted to know more about the updates to key handling,
here's the explanation from David Howells on that:

 "Okay.  There are a number of separate bits.  I'll go over the big bits
  and the odd important other bit, most of the smaller bits are just
  fixes and cleanups.  If you want the small bits accounting for, I can
  do that too.

   (1) Keyring capacity expansion.

        KEYS: Consolidate the concept of an 'index key' for key access
        KEYS: Introduce a search context structure
        KEYS: Search for auth-key by name rather than target key ID
        Add a generic associative array implementation.
        KEYS: Expand the capacity of a keyring

     Several of the patches are providing an expansion of the capacity of a
     keyring.  Currently, the maximum size of a keyring payload is one page.
     Subtract a small header and then divide up into pointers, that only gives
     you ~500 pointers on an x86_64 box.  However, since the NFS idmapper uses
     a keyring to store ID mapping data, that has proven to be insufficient to
     the cause.

     Whatever data structure I use to handle the keyring payload, it can only
     store pointers to keys, not the keys themselves because several keyrings
     may point to a single key.  This precludes inserting, say, and rb_node
     struct into the key struct for this purpose.

     I could make an rbtree of records such that each record has an rb_node
     and a key pointer, but that would use four words of space per key stored
     in the keyring.  It would, however, be able to use much existing code.

     I selected instead a non-rebalancing radix-tree type approach as that
     could have a better space-used/key-pointer ratio.  I could have used the
     radix tree implementation that we already have and insert keys into it by
     their serial numbers, but that means any sort of search must iterate over
     the whole radix tree.  Further, its nodes are a bit on the capacious side
     for what I want - especially given that key serial numbers are randomly
     allocated, thus leaving a lot of empty space in the tree.

     So what I have is an associative array that internally is a radix-tree
     with 16 pointers per node where the index key is constructed from the key
     type pointer and the key description.  This means that an exact lookup by
     type+description is very fast as this tells us how to navigate directly to
     the target key.

     I made the data structure general in lib/assoc_array.c as far as it is
     concerned, its index key is just a sequence of bits that leads to a
     pointer.  It's possible that someone else will be able to make use of it
     also.  FS-Cache might, for example.

   (2) Mark keys as 'trusted' and keyrings as 'trusted only'.

        KEYS: verify a certificate is signed by a 'trusted' key
        KEYS: Make the system 'trusted' keyring viewable by userspace
        KEYS: Add a 'trusted' flag and a 'trusted only' flag
        KEYS: Separate the kernel signature checking keyring from module signing

     These patches allow keys carrying asymmetric public keys to be marked as
     being 'trusted' and allow keyrings to be marked as only permitting the
     addition or linkage of trusted keys.

     Keys loaded from hardware during kernel boot or compiled into the kernel
     during build are marked as being trusted automatically.  New keys can be
     loaded at runtime with add_key().  They are checked against the system
     keyring contents and if their signatures can be validated with keys that
     are already marked trusted, then they are marked trusted also and can
     thus be added into the master keyring.

     Patches from Mimi Zohar make this usable with the IMA keyrings also.

   (3) Remove the date checks on the key used to validate a module signature.

        X.509: Remove certificate date checks

     It's not reasonable to reject a signature just because the key that it was
     generated with is no longer valid datewise - especially if the kernel
     hasn't yet managed to set the system clock when the first module is
     loaded - so just remove those checks.

   (4) Make it simpler to deal with additional X.509 being loaded into the kernel.

        KEYS: Load *.x509 files into kernel keyring
        KEYS: Have make canonicalise the paths of the X.509 certs better to deduplicate

     The builder of the kernel now just places files with the extension ".x509"
     into the kernel source or build trees and they're concatenated by the
     kernel build and stuffed into the appropriate section.

   (5) Add support for userspace kerberos to use keyrings.

        KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches
        KEYS: Implement a big key type that can save to tmpfs

     Fedora went to, by default, storing kerberos tickets and tokens in tmpfs.
     We looked at storing it in keyrings instead as that confers certain
     advantages such as tickets being automatically deleted after a certain
     amount of time and the ability for the kernel to get at these tokens more
     easily.

     To make this work, two things were needed:

     (a) A way for the tickets to persist beyond the lifetime of all a user's
         sessions so that cron-driven processes can still use them.

         The problem is that a user's session keyrings are deleted when the
         session that spawned them logs out and the user's user keyring is
         deleted when the UID is deleted (typically when the last log out
         happens), so neither of these places is suitable.

         I've added a system keyring into which a 'persistent' keyring is
         created for each UID on request.  Each time a user requests their
         persistent keyring, the expiry time on it is set anew.  If the user
         doesn't ask for it for, say, three days, the keyring is automatically
         expired and garbage collected using the existing gc.  All the kerberos
         tokens it held are then also gc'd.

     (b) A key type that can hold really big tickets (up to 1MB in size).

         The problem is that Active Directory can return huge tickets with lots
         of auxiliary data attached.  We don't, however, want to eat up huge
         tracts of unswappable kernel space for this, so if the ticket is
         greater than a certain size, we create a swappable shmem file and dump
         the contents in there and just live with the fact we then have an
         inode and a dentry overhead.  If the ticket is smaller than that, we
         slap it in a kmalloc()'d buffer"

* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (121 commits)
  KEYS: Fix keyring content gc scanner
  KEYS: Fix error handling in big_key instantiation
  KEYS: Fix UID check in keyctl_get_persistent()
  KEYS: The RSA public key algorithm needs to select MPILIB
  ima: define '_ima' as a builtin 'trusted' keyring
  ima: extend the measurement list to include the file signature
  kernel/system_certificate.S: use real contents instead of macro GLOBAL()
  KEYS: fix error return code in big_key_instantiate()
  KEYS: Fix keyring quota misaccounting on key replacement and unlink
  KEYS: Fix a race between negating a key and reading the error set
  KEYS: Make BIG_KEYS boolean
  apparmor: remove the "task" arg from may_change_ptraced_domain()
  apparmor: remove parent task info from audit logging
  apparmor: remove tsk field from the apparmor_audit_struct
  apparmor: fix capability to not use the current task, during reporting
  Smack: Ptrace access check mode
  ima: provide hash algo info in the xattr
  ima: enable support for larger default filedata hash algorithms
  ima: define kernel parameter 'ima_template=' to change configured default
  ima: add Kconfig default measurement list template
  ...

Pull audit updates from Eric Paris:
 "Nothing amazing.  Formatting, small bug fixes, couple of fixes where
  we didn't get records due to some old VFS changes, and a change to how
  we collect execve info..."

Fixed conflict in fs/exec.c as per Eric and linux-next.

* git://git.infradead.org/users/eparis/audit: (28 commits)
  audit: fix type of sessionid in audit_set_loginuid()
  audit: call audit_bprm() only once to add AUDIT_EXECVE information
  audit: move audit_aux_data_execve contents into audit_context union
  audit: remove unused envc member of audit_aux_data_execve
  audit: Kill the unused struct audit_aux_data_capset
  audit: do not reject all AUDIT_INODE filter types
  audit: suppress stock memalloc failure warnings since already managed
  audit: log the audit_names record type
  audit: add child record before the create to handle case where create fails
  audit: use given values in tty_audit enable api
  audit: use nlmsg_len() to get message payload length
  audit: use memset instead of trying to initialize field by field
  audit: fix info leak in AUDIT_GET requests
  audit: update AUDIT_INODE filter rule to comparator function
  audit: audit feature to set loginuid immutable
  audit: audit feature to only allow unsetting the loginuid
  audit: allow unsetting the loginuid (with priv)
  audit: remove CONFIG_AUDIT_LOGINUID_IMMUTABLE
  audit: loginuid functions coding style
  selinux: apply selinux checks on new audit message types
  ...