- 23 6月, 2011 6 次提交
-
-
由 Ben Skeggs 提交于
Not a clue what it is yet, but we get the same numbers as NVIDIA now. My 465 didn't seem to care to greatly *what* I bashed into these registers.. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
The ability to use NVIDIA's fuc has been retained *temporarily* in order to better debug any issues that may be lingering in our initial attempt at writing this ucode. Once I'm fairly confident we're okay, it'll be removed. There's a number of things not implemented by this fuc currently, but most of it is sets of state that our context setup would not have used anyway. No doubt we'll find out what they're for at some point, and implement it if required. This has been tested on 0xc0/0xc4 thus far, and from what I could tell it worked as well as NVIDIA's. It's also been tested on 0xc1, but even with NVIDIA's fuc that chipset doesn't work correctly with nouveau yet. 0xc3/0xc8/0xce should in theory be supported too, but I don't have the hardware to check that. There's no doubt numerous bugs to squash yet, please report any! Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
We need the physical VRAM address in vinst, even for objects mapped into a vm, as the gpuobj suspend/resume code uses PMEM to access the object. Previously, vinst was overloaded to mean "VRAM address" for !VM objects, and "VM address" for VM objects, causing the wrong data to be accessed during suspend/resume. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 16 5月, 2011 9 次提交
-
-
由 Ben Skeggs 提交于
Again, doesn't quite match NVIDIA's, but not sure it really matters. This will however, match the same rules we use to calculate the other related grctx magics. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
PFIFO kickoff should have handled this for us. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Allows per-chipset firmware to be installed, and keeps a copy in memory for suspend/resume purposes. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Much nicer to do that nv50, the code was pretty much written to expect such a change in the future. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Emil Velikov 提交于
Fix 'ERROR: trailing whitespace', Fix 'ERROR: do not use C99 // comments' Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
由 Emil Velikov 提交于
Fix 'ERROR: code indent should use tabs where possible' Fix 'ERROR: space required before the open parenthesis (' Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
-
- 25 2月, 2011 2 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 25 1月, 2011 2 次提交
-
-
由 Ben Skeggs 提交于
This is just barely enough to stop a never-ending IRQ storm that can be triggered by our 3D driver. We have no idea what this engine is.. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Was hitting TPC+1's regs by accident, oops. Reported-by: NChristoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 17 1月, 2011 1 次提交
-
-
由 Ben Skeggs 提交于
Somehow missed this in the original merge of the nvc0 code. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 06 1月, 2011 1 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 30 12月, 2010 2 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 29 12月, 2010 2 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 21 12月, 2010 1 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 06 8月, 2010 1 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 15 6月, 2009 1 次提交
-
-
由 Jerome Glisse 提交于
Add kernel modesetting support to radeon driver, use the ttm memory manager to manage memory and DRM/GEM to provide userspace API. In order to avoid backward compatibility issue and to allow clean design and code the radeon kernel modesetting use different code path than old radeon/drm driver. When kernel modesetting is enabled the IOCTL of radeon/drm driver are considered as invalid and an error message is printed in the log and they return failure. KMS enabled userspace will use new API to talk with the radeon/drm driver. The new API provide functions to create/destroy/share/mmap buffer object which are then managed by the kernel memory manager (here TTM). In order to submit command to the GPU the userspace provide a buffer holding the command stream, along this buffer userspace have to provide a list of buffer object used by the command stream. The kernel radeon driver will then place buffer in GPU accessible memory and will update command stream to reflect the position of the different buffers. The kernel will also perform security check on command stream provided by the user, we want to catch and forbid any illegal use of the GPU such as DMA into random system memory or into memory not owned by the process supplying the command stream. This part of the code is still incomplete and this why we propose that patch as a staging driver addition, future security might forbid current experimental userspace to run. This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX (radeon up to X1950). Works is underway to provide support for R6XX, R7XX and newer hardware (radeon from HD2XXX to HD4XXX). Authors: Jerome Glisse <jglisse@redhat.com> Dave Airlie <airlied@redhat.com> Alex Deucher <alexdeucher@gmail.com> Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 14 7月, 2008 1 次提交
-
-
由 Dave Airlie 提交于
With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 02 1月, 2006 1 次提交
-
-
由 Dave Airlie 提交于
Cleanup SIS + TDFX drivers with latest changes from CVS. From: Eric Anholt <anholt@freebsd.org> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
- 11 11月, 2005 1 次提交
-
-
由 Dave Airlie 提交于
Signed-off-by: NDave Airlie <airlied@linux.ie>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-