As some of ALC269 quirks use the inverted dmic feature, we need to
call alc_inv_dmic_sync() in the resume callback like in alc_resume(),
too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The stac_resume() is exactly what the default resume code does, so
we don't have to define and use it doubly.  Let's cut it off.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Hdmi driver may not receive intrinsic event from gfx side when
it's in runtime suspend mode. There's no ELD info when exit from
runtime suspend. This patch avoid missing ELD info.
Signed-off-by: NWang Xingchao <xingchao.wang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch is a cleanup to the previous patch "reset hda link during system/
runtime suspend".

In this patch
- azx_enter_link_reset() and azx_exit_link_reset() are defined for entering and
  exiting the link reset respectively. azx_link_reset() is no longer used and
  replaced by azx_enter_link_reset().
- azx_reset() reuses the above two new functions for a link reset cycle
Signed-off-by: NMengdong Lin <mengdong.lin@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Pin's connection list may change dynamically with hot-plug event
on Intel Haswell chip. Users would see connections be "0" in codec#.
when play audio on this pin, software driver choose converter from cache
connections. So add "In-driver connection" info to avoid confuse when
raw connections are different with cache connection.
Signed-off-by: NWang Xingchao <xingchao.wang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We've got bug report wrt many machines with VT1708 (e.g. IBM POS
machines) showing the broken auto-mute behavior.  It turned out that
the problem is that the pin control values of the speaker and line-out
pins are completely ignored.  As a workaround, let's use the newly
introduced feature of the generic parser, to control the mute via amp
on pins.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a new flag, auto_mute_via_amp, to determine the behavior of the
headphone / line-out auto-mute.  When this flag is set, the generic
driver mutes the speaker and line outputs via the amp mute of each
pin, instead of changing the pin control values.

This is introduced for devices that don't work expectedly with the pin
control values; for example, some devices are known to keep enabling
the speaker outputs no matter which pin control values are set on the
speaker pins.

The driver doesn't check actually whether the pins have the output amp
caps, but assumes that the proper mixer (mute) controls are created on
all these pins.  If not the case, you can't use this flag for your
device.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Introduce a new helper function, snd_ctl_sync_vmaster(), which updates
the slave put callbacks forcibly as well as calling the hook.  This
will be used in the upcoming patch in HD-audio codec driver for
toggling the mute in vmaster slaves.

Along with the new function, the old snd_ctl_sync_vmaster_hook() is
replaced as a macro calling with the argument hook_only=true.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NWang Xingchao <xingchao.wang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If all the codecs report ClkStopOK (OK to stop bus clock) after being put to
D3, this patch will reset the HDA link before the controller is put to D3.

So the link will be in reset during system or runtime suspend, the bus clock
stops and the codecs are in D3(ClkStop) state.

This may help to reduce power consumption by dozens of mW on some peripheral
hda codecs.
Signed-off-by: NMengdong Lin <mengdong.lin@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add driver for M2Tech hiFace USB-SPDIF interface and compatible devices.

M2Tech hiFace and compatible devices offer a Hi-End S/PDIF Output
Interface, see http://www.m2tech.biz/hiface.html

The supported products are:

  * M2Tech Young
  * M2Tech hiFace
  * M2Tech North Star
  * M2Tech W4S Young
  * M2Tech Corrson
  * M2Tech AUDIA
  * M2Tech SL Audio
  * M2Tech Empirical
  * M2Tech Rockna
  * M2Tech Pathos
  * M2Tech Metronome
  * M2Tech CAD
  * M2Tech Audio Esclusive
  * M2Tech Rotel
  * M2Tech Eeaudio
  * The Chord Company CHORD
  * AVA Group A/S Vitus
Signed-off-by: NAntonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... instead of CONFIG_SND_SOC_SCO.
Introduced in the commit 200ceb96.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace the leftover CONFIG_SND_SOC_OMAP_HDMI_CODEC in
sound/soc/omap/Kconfig with CONFIG_SND_SOC_HDMI_CODEC, which was
forgotten in the commit bf7c6e6c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ASoC: Updates for v3.11

Not a big release subsystem wise, the main changes have been some nice
improvements on the driver side:

- Lots of cleanups and fixes for Blackfin, SGTL5000 and UX500.
- Generalisation of the Bluetooth and HDMI stub drivers.
- New CODEC drivers for SSM2518 and RT5640.
- New machine driver for Tegra CPUs with RT5640.

In sound/usb/card.c and sound/usb/misc/ua101.c there are no spaces
between the vendor and the device names, use this style in the other
drivers too.

This also helps keeping consistency when new drivers copies from the
ones already in the mainline tree.
Signed-off-by: NAntonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For USB devices it's not necessary to allocate physically contiguous
buffers.
Signed-off-by: NAntonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For USB devices it's not necessary to allocate physically contiguous
buffers.
Signed-off-by: NAntonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The snd_card_used variable is only read but never written, remove it.
Signed-off-by: NAntonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This code is older than git, and I haven't tested it, but if size ==
SIZE_MAX_STATUS then we would write one space past the end of the
rmh->Stat[] array.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Like the X220, this quirk was added to support docking station,
so enable the fixup instead.

According to Jan, the generic parser works equal or better
than the current parser. This was tested under a 3.9 kernel.
Reported-by: NJan Alexander Steffens <jan.steffens@gmail.com>
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some VIA codecs like VT1708S have Mic boost amps in the mic pins but
they aren't exposed in the capability bits.  In the past driver code,
we override the pin caps and create mic boost controls forcibly.
While transition to the generic parser, we lost the mic boost controls
although the pin caps are still overridden, because the generic parser
code checks the widget caps, too.

So this patch adds a new helper function to allow the override of the
given widget capability bits, and makes VIA codecs driver to add the
missing input-amp capability bit.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59861
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... instead of open codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For Intel Haswell HDMI codecs, the pins choose converter 0 by default.
This would cause conflict when playing audio on unused pins,the pin with
physical device connected would get audio data too.
i.e. Pin 0/1/2 default choose converter 0, pin 1 has HDMI monitor connected.
when play audio on Pin 0 or pin 2, pin 1 could get audio data too.

This patch configure unused pins to choose different converter.
Signed-off-by: NWang Xingchao <xingchao.wang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a selection to a converter MUX is changed in hdmi_pcm_open(), it
should be cached so that the given connection can be restored properly
at PM resume.  We need just to replace the corresponding
snd_hda_codec_write() call with snd_hda_codec_write_cache().

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix to return -ENOMEM in the kmalloc() error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Haswell converters maybe in wrong power state before usage.
i.e. only converter 0 is in D0, converter 1/2 are in D3.
When pin choose converter 1/2, there's no audio output, this
cause dependency when playing differnt stream on pins.

AUD_PWRST  ConvertorA_Widget_Power_State_Current        D0
AUD_PWRST  ConvertorA_Widget_Power_State_Requsted       D0
AUD_PWRST  ConvertorB_Widget_Power_State_Current        D3
AUD_PWRST  ConvertorB_Widget_Power_State_Requested      D3
AUD_PWRST  ConvC_Widget_PwrSt_Curr                      D3
AUD_PWRST  ConvC_Widget_PwrSt_Req                       D3

This patch check converter's power state and set D0 if it's in D3 mode.
Signed-off-by: NWang Xingchao <xingchao.wang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The refactoring by commit 9040d102 introduced the new function
snd_hda_check_power_state().  This function is supposed to return true
if the state already reached to the target state, but it actually
returns false for that.  An utterly stupid typo while copy & paste.

Fortunately this didn't influence on much behavior because powering up
AFG usually powers up the child widgets, too.  But the finer power
control must have been broken by this bug.

Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>