The function ext4_mb_free_blocks() was using an "unsigned long" to
pass a block number; this will cause 64-bit block numbers to get
truncated on x86 and other 32-bit platforms.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

To catch filesystem bugs or corruption which could lead to the
filesystem getting severly damaged, this patch adds a facility for
tracking all of the filesystem metadata blocks by contiguous regions
in a red-black tree.  This allows quick searching of the tree to
locate extents which might overlap with filesystem metadata blocks.

This facility is also used by the multi-block allocator to assure that
it is not allocating blocks out of the system zone, as well as by the
routines used when reading indirect blocks and extents information
from disk to make sure their contents are valid.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

On UP systems without DEBUG_SPINLOCK, ext4_is_group_locked always fails
which triggers a BUG_ON() call.
This patch fixes it by using assert_spin_locked instead.
Signed-off-by: NVincent Minet <vincent@vincent-minet.net>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We have sb_bgl_lock() and ext4_group_info.bb_state
bit spinlock to protech group information. The later is only
used within mballoc code. Consolidate them to use sb_bgl_lock().
This makes the mballoc.c code much simpler and also avoid
confusion with two locks protecting same info.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In memory-constrained systems with many partitions, the ~68K for each
partition for the mb_history buffer can be excessive.

This patch adds a new mount option, mb_history_length, as well as a
way of setting the default via a module parameter (or via a sysfs
parameter in /sys/module/ext4/parameter/default_mb_history_length).
If the mb_history_length is set to zero, the mb_history facility is
disabled entirely.
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

By avoiding the use of not-yet-used block groups (i.e., block groups
with the BLOCK_UNINIT flag), mballoc had a tendency to create large
files with large non-contiguous gaps.  In addition avoiding the use of
new block groups had a tendency to push regular file data into the
first block group in a flex_bg group, which slows down the speed of
e2fsck pass 2, since it has a tendency to seek much more.  For
example:

               Before Patch                       After Patch
              Time in seconds                   Time in seconds
            Real /  User/  Sys   MB/s      Real /  User/  Sys    MB/s
Pass 1      8.52 / 2.21 / 0.46  20.43      8.84 / 4.97 / 1.11   19.68
Pass 2     21.16 / 1.02 / 1.86  11.30      6.54 / 1.77 / 1.78   36.39
Pass 3      0.01 / 0.00 / 0.00 139.00      0.01 / 0.01 / 0.00  128.90
Pass 4      0.16 / 0.15 / 0.00   0.00      0.17 / 0.17 / 0.00    0.00
Pass 5      2.52 / 1.99 / 0.09   0.79      2.31 / 1.78 / 0.06    0.86
Total      32.40 / 5.11 / 2.49  12.81     17.99 / 8.75 / 2.98   23.01

This was on a sample 80 gig root filesystem which was approximately
50% full.  Note the improved e2fsck pass 2 performance, by over a
factor of 3, due to a decreased number of seeks.  (The total amount of
I/O in pass 2 was unchanged; the layout of the directory blocks was
simply much better from e2fsck's's perspective.)

Other changes as a result of this patch on this sample filesystem:

                             Before Patch    After Patch
# of non-contig files           762             779
# of non-contig directories     571             570
# of BLOCK_UNINIT bg's          307             293
# of INODE_UNINIT bg's          503             503

Out of 640 block groups, of which 333 were in use, this patch caused
an extra 14 block groups to be utilized.  The number of non-contiguous
files did go up slightly, but when measured against the 99.9% of the
files (603,154) which were contiguously allocated, this is pretty
insignificant.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndreas Dilger <adilger@sun.com>

Ext4's on-line resizing adds a new block group and then, only at the
last step adjusts s_groups_count.  However, it's possible on SMP
systems that another CPU could see the updated the s_group_count and
not see the newly initialized data structures for the just-added block
group.  For this reason, it's important to insert a SMP read barrier
after reading s_groups_count and before reading any (for example) the
new block group descriptors allowed by the increased value of
s_groups_count.

Unfortunately, we rather blatently violate this locking protocol
documented in fs/ext4/resize.c.  Fortunately, (1) on-line resizes
happen relatively rarely, and (2) it seems rare that the filesystem
code will immediately try to use just-added block group before any
memory ordering issues resolve themselves.  So apparently problems
here are relatively hard to hit, since ext3 has been vulnerable to the
same issue for years with no one apparently complaining.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Smatch (http://repo.or.cz/w/smatch.git/) complains about the locking in
ext4_mb_add_n_trim() from fs/ext4/mballoc.c

  4438          list_for_each_entry_rcu(tmp_pa, &lg->lg_prealloc_list[order],
  4439                                                  pa_inode_list) {
  4440                  spin_lock(&tmp_pa->pa_lock);
  4441                  if (tmp_pa->pa_deleted) {
  4442                          spin_unlock(&pa->pa_lock);
  4443                          continue;
  4444                  }

Brown paper bag time...
Reported-by: NDan Carpenter <error27@gmail.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

This was found by smatch (http://repo.or.cz/w/smatch.git/)
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

Impact: code cleanup

This patch rename pa_linear to pa_type and add MB_INODE_PA
and MB_GROUP_PA to indicate inode and group prealloc space.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Use lowercase names of quota functions instead of old uppercase ones.
Signed-off-by: NJan Kara <jack@suse.cz>
Acked-by: NMingming Cao <cmm@us.ibm.com>
CC: linux-ext4@vger.kernel.org

Uses quota reservation/claim/release to handle quota properly for delayed
allocation in the three steps: 1) quotas are reserved when data being copied
to cache when block allocation is defered 2) when new blocks are allocated.
reserved quotas are converted to the real allocated quota, 2) over-booked
quotas for metadata blocks are released back.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Acked-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NJan Kara <jack@suse.cz>

This is for Red Hat bug 490026: EXT4 panic, list corruption in
ext4_mb_new_inode_pa

ext4_lock_group(sb, group) is supposed to protect this list for
each group, and a common code flow to remove an album is like
this:

    ext4_get_group_no_and_offset(sb, pa->pa_pstart, &grp, NULL);
    ext4_lock_group(sb, grp);
    list_del(&pa->pa_group_list);
    ext4_unlock_group(sb, grp);

so it's critical that we get the right group number back for
this prealloc context, to lock the right group (the one 
associated with this pa) and prevent concurrent list manipulation.

however, ext4_mb_put_pa() passes in (pa->pa_pstart - 1) with a 
comment, "-1 is to protect from crossing allocation group".

This makes sense for the group_pa, where pa_pstart is advanced
by the length which has been used (in ext4_mb_release_context()),
and when the entire length has been used, pa_pstart has been
advanced to the first block of the next group.

However, for inode_pa, pa_pstart is never advanced; it's just
set once to the first block in the group and not moved after
that.  So in this case, if we subtract one in ext4_mb_put_pa(),
we are actually locking the *previous* group, and opening the
race with the other threads which do not subtract off the extra
block.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Thiemo Nagel reported that:

# dd if=/dev/zero of=image.ext4 bs=1M count=2
# mkfs.ext4 -v -F -b 1024 -m 0 -g 512 -G 4 -I 128 -N 1 \
  -O large_file,dir_index,flex_bg,extent,sparse_super image.ext4
# mount -o loop image.ext4 mnt/
# dd if=/dev/zero of=mnt/file

oopsed, with a BUG_ON in ext4_mb_normalize_request because
size == EXT4_BLOCKS_PER_GROUP

It appears to me (esp. after talking to Andreas) that the BUG_ON
is bogus; a request of exactly EXT4_BLOCKS_PER_GROUP should
be allowed, though larger sizes do indicate a problem.

Fix that an another (apparently rare) codepath with a similar check.
Reported-by: NThiemo Nagel <thiemo.nagel@ph.tum.de>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Reduce pressure on the sb_bgl_lock family of locks by using atomic_t's
to track the number of free blocks and inodes in each flex_group.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Remove tuning knobs in /proc/fs/ext4/<dev/* since they have been
replaced by knobs in sysfs at /sys/fs/ext4/<dev>/*.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The find_group_flex() inode allocator is now only used if the
filesystem is mounted using the "oldalloc" mount option.  It is
replaced with the original Orlov allocator that has been updated for
flex_bg filesystems (it should behave the same way if flex_bg is
disabled).  The inode allocator now functions by taking into account
each flex_bg group, instead of each block group, when deciding whether
or not it's time to allocate a new directory into a fresh flex_bg.

The block allocator has also been changed so that the first block
group in each flex_bg is preferred for use for storing directory
blocks.  This keeps directory blocks close together, which is good for
speeding up e2fsck since large directories are more likely to look
like this:

debugfs:  stat /home/tytso/Maildir/cur
Inode: 1844562   Type: directory    Mode:  0700   Flags: 0x81000
Generation: 1132745781    Version: 0x00000000:0000ad71
User: 15806   Group: 15806   Size: 1060864
File ACL: 0    Directory ACL: 0
Links: 2   Blockcount: 2072
Fragment:  Address: 0    Number: 0    Size: 0
 ctime: 0x499c0ff4:164961f4 -- Wed Feb 18 08:41:08 2009
 atime: 0x499c0ff4:00000000 -- Wed Feb 18 08:41:08 2009
 mtime: 0x49957f51:00000000 -- Fri Feb 13 09:10:25 2009
crtime: 0x499c0f57:00d51440 -- Wed Feb 18 08:38:31 2009
Size of extra inode fields: 28
BLOCKS:
(0):7348651, (1-258):7348654-7348911
TOTAL: 259
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When creating a new ext4_prealloc_space structure, we have to
initialize its list_head pointers before we add them to any prealloc
lists.  Otherwise, with list debug enabled, we will get list
corruption warnings.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We should not call ext4_mb_add_n_trim while holding alloc_semp.

    =============================================
    [ INFO: possible recursive locking detected ]
    2.6.29-rc4-git1-dirty #124
    ---------------------------------------------
    ffsb/3116 is trying to acquire lock:
     (&meta_group_info[i]->alloc_sem){----}, at: [<ffffffff8035a6e8>]
     ext4_mb_load_buddy+0xd2/0x343

    but task is already holding lock:
     (&meta_group_info[i]->alloc_sem){----}, at: [<ffffffff8035a6e8>]
     ext4_mb_load_buddy+0xd2/0x343

http://bugzilla.kernel.org/show_bug.cgi?id=12672Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When bg_free_blocks_count was renamed to bg_free_blocks_count_lo in
560671a0, its uses under EXT4FS_DEBUG were not changed to the helper
ext4_free_blks_count.

Another commit, 498e5f24, also did not change everything needed under
EXT4FS_DEBUG, thus making it spill some warnings related to printing
format.

This commit fixes both issues and makes ext4 build again when
EXT4FS_DEBUG is enabled.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

With nodelalloc option we need to update the dirty block counter on
block allocation failure. This is needed because we increment the
dirty block counter early in the block allocation phase. Without
the patch s_dirty_blocks_counter goes wrong so that filesystem's
free blocks decreases incorrectly.
Tested-by: NAkira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

We need to init the complete page during buddy cache init
by setting the contents to '1'.  Otherwise we can see the
following errors after doing an online resize of the
filesystem:

EXT4-fs error (device sdb1): ext4_mb_mark_diskspace_used:
	Allocating block 1040385 in system zone of 127 group
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

After we mark the blocks in the buddy cache as allocated,
we need to ensure that we don't reinit the buddy cache until
the block bitmap is updated.  This commit achieves this by holding
the group_info alloc_semaphore till ext4_mb_release_context
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

We need to mark the block/inode bitmap beyond the end of the group
with '1'.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

For uninit block group, the on-disk bitmap is not initialized. That
implies we cannot depend on the uptodate flag on the bitmap
buffer_head to find bitmap validity.  Use a new buffer_head flag which
would be set after we properly initialize the bitmap.  This also
prevents (re-)initializing the uninit group bitmap every time we call 
ext4_read_block_bitmap().
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

Rename some variables.  We also unlock locks in the reverse order we
acquired as a part of cleanup.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Rename the lower bits with suffix _lo and add helper
to access the values. Also rename bg_itable_unused_hi
to bg_pad as in e2fsprogs.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We need to make sure we update the block bitmap and clear
EXT4_BG_BLOCK_UNINIT flag with sb_bgl_lock held, since
ext4_read_block_bitmap() looks at EXT4_BG_BLOCK_UNINIT to decide
whether to initialize the block bitmap each time it is called
(introduced by commit c806e68f), and this can race with block
allocations in ext4_mb_mark_diskspace_used().

ext4_read_block_bitmap does:

spin_lock(sb_bgl_lock(EXT4_SB(sb), block_group));
if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
	ext4_init_block_bitmap(sb, bh, block_group, desc);

Now on the block allocation side we do

mb_set_bits(sb_bgl_lock(sbi, ac->ac_b_ex.fe_group), bitmap_bh->b_data,
			ac->ac_b_ex.fe_start, ac->ac_b_ex.fe_len);
....
spin_lock(sb_bgl_lock(sbi, ac->ac_b_ex.fe_group));
if (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
	gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT);

ie on allocation we update the bitmap then we take the sb_bgl_lock
and clear the EXT4_BG_BLOCK_UNINIT flag. What can happen is a
parallel ext4_read_block_bitmap can zero out the bitmap in between
the above mb_set_bits and spin_lock(sb_bg_lock..)

The race results in below user visible errors
EXT4-fs error (device sdb1): ext4_mb_release_inode_pa: free 100, pa_free 105
EXT4-fs error (device sdb1): mb_free_blocks: double-free of inode 0's block ..
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

The mballoc code likes to call ext4_error while it is holding locked
block groups.  This can causes a scheduling in atomic context BUG.  We
can't just unlock the block group and relock it after/if ext4_error
returns since that might result in race conditions in the case where
the filesystem is set to continue after finding errors.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In ext4_mb_init_group(), if the filesystem block size is less than
PAGE_SIZE/2, the code tries to grab alloc_sem for multiple block
groups in a loop.  We need to allow for this by using
down_write_nested() and passing in the loop index as a lock subclass
number.  This works because no other code path needs to take multiple
alloc_sem's.  Note that lockdep will fail for filesystem blocksize
smaller than to PAGE_SIZE/16k.  (e.g., a 1k filesystem blocksize with
a 32k page size, or a 2k filesystem blocksize with a 64k blocksize,
etc.)
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When we generate buddy cache (especially during resize) we need to
make sure we don't use the blocks freed but not yet comitted.  This
makes sure we have the right value of free blocks count in the group
info and also in the bitmap.  This also ensures the ordered mode
consistency
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

Move some of the forward declaration of the static functions
to mballoc.c where they are used. This enables us to include
mballoc.h in other .c files. Also correct the buddy cache
documentation.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The new groups added during resize are flagged as
need_init group. Make sure we properly initialize these
groups. When we have block size < page size and we are adding
new groups the page may still be marked uptodate even though
we haven't initialized the group. While forcing the init
of buddy cache we need to make sure other groups part of the
same page of buddy cache is not using the cache.
group_info->alloc_sem is added to ensure the same.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
cc: stable@kernel.org

* Change EXT4_HAS_*_FEATURE to return a boolean
* Add a function prototype for ext4_fiemap() in ext4.h
* Make ext4_ext_fiemap_cb() and ext4_xattr_fiemap() be static functions
* Add lock annotations to mb_free_blocks()
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Convert the unsigned longs that are most responsible for bloating the
stack usage on 64-bit systems.

Nearly all places in the ext3/4 code which uses "unsigned long" is
probably a bug, since on 32-bit systems a ulong a 32-bits, which means
we are wasting stack space on 64-bit systems.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Nearly all places in the ext3/4 code which uses "unsigned long" is
probably a bug, since on 32-bit systems a ulong a 32-bits, which means
we are wasting stack space on 64-bit systems.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We can call ext4_mb_check_limits even after successfully allocating
the requested blocks.  In that case, make sure we don't overwrite
ac_status if it already has the status AC_STATUS_FOUND.  This fixes
the lockdep warning:

=============================================
[ INFO: possible recursive locking detected ]
2.6.28-rc6-autokern1 #1
---------------------------------------------
fsstress/11948 is trying to acquire lock:
 (&meta_group_info[i]->alloc_sem){----}, at: [<c04d9a49>] ext4_mb_load_buddy+0x9f/0x278
.....

stack backtrace:
.....
 [<c04db974>] ext4_mb_regular_allocator+0xbb5/0xd44
.....

but task is already holding lock:
 (&meta_group_info[i]->alloc_sem){----}, at: [<c04d9a49>] ext4_mb_load_buddy+0x9f/0x278
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

This removes annoying blank syslog entries emitted by ext4_error() or
ext4_warning(), since these functions add their own newline.
Signed-off-by: NNick Warne <nick@ukfsn.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>