Split SOFTLOCKUP_DETECTOR from LOCKUP_DETECTOR, and split
HARDLOCKUP_DETECTOR_PERF from HARDLOCKUP_DETECTOR.

LOCKUP_DETECTOR implies the general boot, sysctl, and programming
interfaces for the lockup detectors.

An architecture that wants to use a hard lockup detector must define
HAVE_HARDLOCKUP_DETECTOR_PERF or HAVE_HARDLOCKUP_DETECTOR_ARCH.

Alternatively an arch can define HAVE_NMI_WATCHDOG, which provides the
minimum arch_touch_nmi_watchdog, and it otherwise does its own thing and
does not implement the LOCKUP_DETECTOR interfaces.

sparc is unusual in that it has started to implement some of the
interfaces, but not fully yet.  It should probably be converted to a full
HAVE_HARDLOCKUP_DETECTOR_ARCH.

[npiggin@gmail.com: fix]
  Link: http://lkml.kernel.org/r/20170617223522.66c0ad88@roar.ozlabs.ibm.com
Link: http://lkml.kernel.org/r/20170616065715.18390-4-npiggin@gmail.comSigned-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Reviewed-by: NBabu Moger <babu.moger@oracle.com>
Tested-by: Babu Moger <babu.moger@oracle.com>	[sparc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For architectures that define HAVE_NMI_WATCHDOG, instead of having them
provide the complete touch_nmi_watchdog() function, just have them
provide arch_touch_nmi_watchdog().

This gives the generic code more flexibility in implementing this
function, and arch implementations don't miss out on touching the
softlockup watchdog or other generic details.

Link: http://lkml.kernel.org/r/20170616065715.18390-3-npiggin@gmail.comSigned-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NDon Zickus <dzickus@redhat.com>
Reviewed-by: NBabu Moger <babu.moger@oracle.com>
Tested-by: Babu Moger <babu.moger@oracle.com>	[sparc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:

 "Write to this file of integer N makes N-th call in the current task
  fail (N is 0-based). Read from this file returns a single char 'Y' or
  'N' that says if the fault setup with a previous write to this file
  was injected or not, and disables the fault if it wasn't yet injected.
  Note that this file enables all types of faults (slab, futex, etc).
  This setting takes precedence over all other generic settings like
  probability, interval, times, etc. But per-capability settings (e.g.
  fail_futex/ignore-private) take precedence over it. This feature is
  intended for systematic testing of faults in a single system call. See
  an example below"

Why add a new setting:
1. Existing settings are global rather than per-task.
   So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
   which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
   of all of probability, interval, times, space, task-filter and
   unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
   types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
   stress testing better be done from an unprivileged user.
   Similarly, this would require opening the debugfs files to the
   unprivileged user, as he would need to reopen at least times file
   (not possible to pre-open before dropping privs).

The proposed interface solves all of the above (see the example).

We want to integrate this into syzkaller fuzzer.  A prototype has found
10 bugs in kernel in first day of usage:

  https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance

I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned.  So I am fine with the current
version of the code.

[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With current epoll architecture target files are addressed with
file_struct and file descriptor number, where the last is not unique.
Moreover files can be transferred from another process via unix socket,
added into queue and closed then so we won't find this descriptor in the
task fdinfo list.

Thus to checkpoint and restore such processes CRIU needs to find out
where exactly the target file is present to add it into epoll queue.
For this sake one can use kcmp call where some particular target file
from the queue is compared with arbitrary file passed as an argument.

Because epoll target files can have same file descriptor number but
different file_struct a caller should explicitly specify the offset
within.

To test if some particular file is matching entry inside epoll one have
to

 - fill kcmp_epoll_slot structure with epoll file descriptor,
   target file number and target file offset (in case if only
   one target is present then it should be 0)

 - call kcmp as kcmp(pid1, pid2, KCMP_EPOLL_TFD, fd, &kcmp_epoll_slot)
    - the kernel fetch file pointer matching file descriptor @fd of pid1
    - lookups for file struct in epoll queue of pid2 and returns traditional
      0,1,2 result for sorting purpose

Link: http://lkml.kernel.org/r/20170424154423.511592110@gmail.comSigned-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: NAndrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Prevent use of uninitialized memory (originating from the stack frame of
do_sysctl()) by verifying that the name array is filled with sufficient
input data before comparing its specific entries with integer constants.

Through timing measurement or analyzing the kernel debug logs, a
user-mode program could potentially infer the results of comparisons
against the uninitialized memory, and acquire some (very limited)
information about the state of the kernel stack.  The change also
eliminates possible future warnings by tools such as KMSAN and other
code checkers / instrumentations.

Link: http://lkml.kernel.org/r/20170524122139.21333-1-mjurczyk@google.comSigned-off-by: NMateusz Jurczyk <mjurczyk@google.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To keep parity with regular int interfaces provide the an unsigned int
proc_douintvec_minmax() which allows you to specify a range of allowed
valid numbers.

Adding proc_douintvec_minmax_sysadmin() is easy but we can wait for an
actual user for that.

Link: http://lkml.kernel.org/r/20170519033554.18592-6-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit e7d316a0 ("sysctl: handle error writing UINT_MAX to u32
fields") added proc_douintvec() to start help adding support for
unsigned int, this however was only half the work needed.  Two fixes
have come in since then for the following issues:

  o Printing the values shows a negative value, this happens since
    do_proc_dointvec() and this uses proc_put_long()

This was fixed by commit 5380e564 ("sysctl: don't print negative
flag for proc_douintvec").

  o We can easily wrap around the int values: UINT_MAX is 4294967295, if
    we echo in 4294967295 + 1 we end up with 0, using 4294967295 + 2 we
    end up with 1.
  o We echo negative values in and they are accepted

This was fixed by commit 425fffd8 ("sysctl: report EINVAL if value
is larger than UINT_MAX for proc_douintvec").

It still also failed to be added to sysctl_check_table()...  instead of
adding it with the current implementation just provide a proper and
simplified unsigned int support without any array unsigned int support
with no negative support at all.

Historically sysctl proc helpers have supported arrays, due to the
complexity this adds though we've taken a step back to evaluate array
users to determine if its worth upkeeping for unsigned int.  An
evaluation using Coccinelle has been done to perform a grammatical
search to ask ourselves:

  o How many sysctl proc_dointvec() (int) users exist which likely
    should be moved over to proc_douintvec() (unsigned int) ?
	Answer: about 8
	- Of these how many are array users ?
		Answer: Probably only 1
  o How many sysctl array users exist ?
	Answer: about 12

This last question gives us an idea just how popular arrays: they are not.
Array support should probably just be kept for strings.

The identified uint ports are:

  drivers/infiniband/core/ucma.c - max_backlog
  drivers/infiniband/core/iwcm.c - default_backlog
  net/core/sysctl_net_core.c - rps_sock_flow_sysctl()
  net/netfilter/nf_conntrack_timestamp.c - nf_conntrack_timestamp -- bool
  net/netfilter/nf_conntrack_acct.c nf_conntrack_acct -- bool
  net/netfilter/nf_conntrack_ecache.c - nf_conntrack_events -- bool
  net/netfilter/nf_conntrack_helper.c - nf_conntrack_helper -- bool
  net/phonet/sysctl.c proc_local_port_range()

The only possible array users is proc_local_port_range() but it does not
seem worth it to add array support just for this given the range support
works just as well.  Unsigned int support should be desirable more for
when you *need* more than INT_MAX or using int min/max support then does
not suffice for your ranges.

If you forget and by mistake happen to register an unsigned int proc
entry with an array, the driver will fail and you will get something as
follows:

sysctl table check failed: debug/test_sysctl//uint_0002 array now allowed
CPU: 2 PID: 1342 Comm: modprobe Tainted: G        W   E <etc>
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS <etc>
Call Trace:
 dump_stack+0x63/0x81
 __register_sysctl_table+0x350/0x650
 ? kmem_cache_alloc_trace+0x107/0x240
 __register_sysctl_paths+0x1b3/0x1e0
 ? 0xffffffffc005f000
 register_sysctl_table+0x1f/0x30
 test_sysctl_init+0x10/0x1000 [test_sysctl]
 do_one_initcall+0x52/0x1a0
 ? kmem_cache_alloc_trace+0x107/0x240
 do_init_module+0x5f/0x200
 load_module+0x1867/0x1bd0
 ? __symbol_put+0x60/0x60
 SYSC_finit_module+0xdf/0x110
 SyS_finit_module+0xe/0x10
 entry_SYSCALL_64_fastpath+0x1e/0xad
RIP: 0033:0x7f042b22d119
<etc>

Fixes: e7d316a0 ("sysctl: handle error writing UINT_MAX to u32 fields")
Link: http://lkml.kernel.org/r/20170519033554.18592-5-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Suggested-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Liping Zhang <zlpnobody@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The mode sysctl_writes_strict positional checks keep being copy and pasted
as we add new proc handlers.  Just add a helper to avoid code duplication.

Link: http://lkml.kernel.org/r/20170519033554.18592-4-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Suggested-by: NKees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Document the different sysctl_writes_strict modes in code.

Link: http://lkml.kernel.org/r/20170519033554.18592-3-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently vmcoreinfo data is updated at boot time subsys_initcall(), it
has the risk of being modified by some wrong code during system is
running.

As a result, vmcore dumped may contain the wrong vmcoreinfo.  Later on,
when using "crash", "makedumpfile", etc utility to parse this vmcore, we
probably will get "Segmentation fault" or other unexpected errors.

E.g.  1) wrong code overwrites vmcoreinfo_data; 2) further crashes the
system; 3) trigger kdump, then we obviously will fail to recognize the
crash context correctly due to the corrupted vmcoreinfo.

Now except for vmcoreinfo, all the crash data is well
protected(including the cpu note which is fully updated in the crash
path, thus its correctness is guaranteed).  Given that vmcoreinfo data
is a large chunk prepared for kdump, we better protect it as well.

To solve this, we relocate and copy vmcoreinfo_data to the crash memory
when kdump is loading via kexec syscalls.  Because the whole crash
memory will be protected by existing arch_kexec_protect_crashkres()
mechanism, we naturally protect vmcoreinfo_data from write(even read)
access under kernel direct mapping after kdump is loaded.

Since kdump is usually loaded at the very early stage after boot, we can
trust the correctness of the vmcoreinfo data copied.

On the other hand, we still need to operate the vmcoreinfo safe copy
when crash happens to generate vmcoreinfo_note again, we rely on vmap()
to map out a new kernel virtual address and update to use this new one
instead in the following crash_save_vmcoreinfo().

BTW, we do not touch vmcoreinfo_note, because it will be fully updated
using the protected vmcoreinfo_data after crash which is surely correct
just like the cpu crash note.

Link: http://lkml.kernel.org/r/1493281021-20737-3-git-send-email-xlpang@redhat.comSigned-off-by: NXunlei Pang <xlpang@redhat.com>
Tested-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vmcoreinfo_max_size stands for the vmcoreinfo_data, the correct one we
should use is vmcoreinfo_note whose total size is VMCOREINFO_NOTE_SIZE.

Like explained in commit 77019967 ("kdump: fix exported size of
vmcoreinfo note"), it should not affect the actual function, but we
better fix it, also this change should be safe and backward compatible.

After this, we can get rid of variable vmcoreinfo_max_size, let's use
the corresponding macros directly, fewer variables means more safety for
vmcoreinfo operation.

[xlpang@redhat.com: fix build warning]
  Link: http://lkml.kernel.org/r/1494830606-27736-1-git-send-email-xlpang@redhat.com
Link: http://lkml.kernel.org/r/1493281021-20737-2-git-send-email-xlpang@redhat.comSigned-off-by: NXunlei Pang <xlpang@redhat.com>
Reviewed-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: NDave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As Eric said,
 "what we need to do is move the variable vmcoreinfo_note out of the
  kernel's .bss section. And modify the code to regenerate and keep this
  information in something like the control page.

  Definitely something like this needs a page all to itself, and ideally
  far away from any other kernel data structures. I clearly was not
  watching closely the data someone decided to keep this silly thing in
  the kernel's .bss section."

This patch allocates extra pages for these vmcoreinfo_XXX variables, one
advantage is that it enhances some safety of vmcoreinfo, because
vmcoreinfo now is kept far away from other kernel data structures.

Link: http://lkml.kernel.org/r/1493281021-20737-1-git-send-email-xlpang@redhat.comSigned-off-by: NXunlei Pang <xlpang@redhat.com>
Tested-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Suggested-by: NEric Biederman <ebiederm@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The reason to disable interrupts seems to be to avoid switching to a
different processor while handling per cpu data using individual loads and
stores.  If we use per cpu RMV primitives we will not have to disable
interrupts.

Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705171055130.5898@east.gentwo.orgSigned-off-by: NChristoph Lameter <cl@linux.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reported-and-tested-by: NMeelis Roos <mroos@linux.ee>
Fixes: commit d9e968cb "getrlimit()/setrlimit(): move compat to native"
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

wait4(-2147483648, 0x20, 0, 0xdd0000) triggers:
UBSAN: Undefined behaviour in kernel/exit.c:1651:9

The related calltrace is as follows:

  negation of -2147483648 cannot be represented in type 'int':
  CPU: 9 PID: 16482 Comm: zj Tainted: G    B          ---- -------   3.10.0-327.53.58.71.x86_64+ #66
  Hardware name: Huawei Technologies Co., Ltd. Tecal RH2285          /BC11BTSA              , BIOS CTSAV036 04/27/2011
  Call Trace:
    dump_stack+0x19/0x1b
    ubsan_epilogue+0xd/0x50
    __ubsan_handle_negate_overflow+0x109/0x14e
    SyS_wait4+0x1cb/0x1e0
    system_call_fastpath+0x16/0x1b

Exclude the overflow to avoid the UBSAN warning.

Link: http://lkml.kernel.org/r/1497264618-20212-1-git-send-email-zhongjiang@huawei.comSigned-off-by: Nzhongjiang <zhongjiang@huawei.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When running kill(72057458746458112, 0) in userspace I hit the following
issue.

  UBSAN: Undefined behaviour in kernel/signal.c:1462:11
  negation of -2147483648 cannot be represented in type 'int':
  CPU: 226 PID: 9849 Comm: test Tainted: G    B          ---- -------   3.10.0-327.53.58.70.x86_64_ubsan+ #116
  Hardware name: Huawei Technologies Co., Ltd. RH8100 V3/BC61PBIA, BIOS BLHSV028 11/11/2014
  Call Trace:
    dump_stack+0x19/0x1b
    ubsan_epilogue+0xd/0x50
    __ubsan_handle_negate_overflow+0x109/0x14e
    SYSC_kill+0x43e/0x4d0
    SyS_kill+0xe/0x10
    system_call_fastpath+0x16/0x1b

Add code to avoid the UBSAN detection.

[akpm@linux-foundation.org: tweak comment]
Link: http://lkml.kernel.org/r/1496670008-59084-1-git-send-email-zhongjiang@huawei.comSigned-off-by: Nzhongjiang <zhongjiang@huawei.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[thomas@m3y3r.de: v3: fix arch specific implementations]
  Link: http://lkml.kernel.org/r/1497890858.12931.7.camel@m3y3r.deSigned-off-by: NThomas Meyer <thomas@m3y3r.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

'all_var' looks like a variable, but is actually a macro.  Use
IS_ENABLED(CONFIG_KALLSYMS_ALL) for clarification.

Link: http://lkml.kernel.org/r/1497577591-3434-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

setgroups is not exactly a hot path, so we might as well use the library
function instead of open-coding the sorting.  Saves ~150 bytes.

Link: http://lkml.kernel.org/r/1497301378-22739-1-git-send-email-linux@rasmusvillemoes.dkSigned-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

attribute_groups are not supposed to change at runtime.  All functions
working with attribute_groups provided by <linux/sysfs.h> work with
const attribute_group.  So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   1120	    544	     16	   1680	    690	kernel/ksysfs.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   1160	    480	     16	   1656	    678	kernel/ksysfs.o

Link: http://lkml.kernel.org/r/aa224b3cc923fdbb3edd0c41b2c639c85408c9e8.1498737347.git.arvind.yadav.cs@gmail.comSigned-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Dave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PR_SET_THP_DISABLE has a rather subtle semantic.  It doesn't affect any
existing mapping because it only updated mm->def_flags which is a
template for new mappings.

The mappings created after prctl(PR_SET_THP_DISABLE) have VM_NOHUGEPAGE
flag set.  This can be quite surprising for all those applications which
do not do prctl(); fork() & exec() and want to control their own THP
behavior.

Another usecase when the immediate semantic of the prctl might be useful
is a combination of pre- and post-copy migration of containers with
CRIU.  In this case CRIU populates a part of a memory region with data
that was saved during the pre-copy stage.  Afterwards, the region is
registered with userfaultfd and CRIU expects to get page faults for the
parts of the region that were not yet populated.  However, khugepaged
collapses the pages and the expected page faults do not occur.

In more general case, the prctl(PR_SET_THP_DISABLE) could be used as a
temporary mechanism for enabling/disabling THP process wide.

Implementation wise, a new MMF_DISABLE_THP flag is added.  This flag is
tested when decision whether to use huge pages is taken either during
page fault of at the time of THP collapse.

It should be noted, that the new implementation makes PR_SET_THP_DISABLE
master override to any per-VMA setting, which was not the case
previously.

Fixes: a0715cc2 ("mm, thp: add VM_INIT_DEF_MASK and PRCTL_THP_DISABLE")
Link: http://lkml.kernel.org/r/1496415802-30944-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We lose the distinction between "found a PID" and "nothing, but that's not
an error" a bit too early in waitid().  Easily fixed, fortunately...
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Fixes: 67d7ddde ("waitid(2): leave copyout of siginfo to syscall itself")
Tested-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Similar to commit 90ec5e89 ("kretprobes: Ensure probe location is
at function entry"), ensure that the jprobe probepoint is at function
entry.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a4525af6c5a42df385efa31251246cf7cca73598.1499443367.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Re-factor jprobe registration functions as the current version is
getting too unwieldy. Move the actual jprobe registration to
register_jprobe() and re-organize code accordingly.
Suggested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/089cae4bfe73767f765291ee0e6fb0c3d240e5f1.1499443367.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Rename function_offset_within_entry() to scope it to kprobe namespace by
using kprobe_ prefix, and to also simplify it.
Suggested-by: NIngo Molnar <mingo@kernel.org>
Suggested-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/3aa6c7e2e4fb6e00f3c24fa306496a66edb558ea.1499443367.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

In architectures that use qspinlock, like x86, prefetch is loaded
indirectly via the asm/qspinlock.h include.  On other architectures, like
OpenRISC, which may want to use asm-generic/qspinlock.h the built will
fail without the asm/prefetch.h include.

Fix this by including directly.
Signed-off-by: NStafford Horne <shorne@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170707195658.23840-1-shorne@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

A number of irqchip implementations are (ab)using the irqdomain allocator
by passing a fwnode that is neither a FWNODE_OF or a FWNODE_IRQCHIP.

This is pretty bad, but it also feels pretty crap to force these drivers to
allocate their own irqchip_fwid when they already have a proper fwnode.

Instead, let's teach the irqdomain allocator about ACPI device nodes, and
add some lovely name generation code... Tested on an arm64 D05 system.
Reported-and-tested-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ma Jun <majun258@huawei.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Link: http://lkml.kernel.org/r/20170707083959.10349-1-marc.zyngier@arm.com

debugfs_remove() can be called with a NULL pointer.

Fixes: 087cdfb6 ("genirq/debugfs: Add proper debugfs interface")
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The kmem-specific functions do the same thing.  Switch and drop.

Link: http://lkml.kernel.org/r/20170530181724.27197-5-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When updating task's mems_allowed and rebinding its mempolicy due to
cpuset's mems being changed, we currently only take the seqlock for
writing when either the task has a mempolicy, or the new mems has no
intersection with the old mems.

This should be enough to prevent a parallel allocation seeing no
available nodes, but the optimization is IMHO unnecessary (cpuset
updates should not be frequent), and we still potentially risk issues if
the intersection of new and old nodes has limited amount of
free/reclaimable memory.

Let's just use the seqlock for all tasks.

Link: http://lkml.kernel.org/r/20170517081140.30654-6-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit c0ff7453 ("cpuset,mm: fix no node to alloc memory when
changing cpuset's mems") has introduced a two-step protocol when
rebinding task's mempolicy due to cpuset update, in order to avoid a
parallel allocation seeing an empty effective nodemask and failing.

Later, commit cc9a6c87 ("cpuset: mm: reduce large amounts of memory
barrier related damage v3") introduced a seqlock protection and removed
the synchronization point between the two update steps.  At that point
(or perhaps later), the two-step rebinding became unnecessary.

Currently it only makes sure that the update first adds new nodes in
step 1 and then removes nodes in step 2.  Without memory barriers the
effects are questionable, and even then this cannot prevent a parallel
zonelist iteration checking the nodemask at each step to observe all
nodes as unusable for allocation.  We now fully rely on the seqlock to
prevent premature OOMs and allocation failures.

We can thus remove the two-step update parts and simplify the code.

Link: http://lkml.kernel.org/r/20170517081140.30654-5-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update dcache, inode, pid, mountpoint, and mount hash tables to use
HASH_ZERO, and remove initialization after allocations.  In case of
places where HASH_EARLY was used such as in __pv_init_lock_hash the
zeroed hash table was already assumed, because memblock zeroes the
memory.

CPU: SPARC M6, Memory: 7T
Before fix:
  Dentry cache hash table entries: 1073741824
  Inode-cache hash table entries: 536870912
  Mount-cache hash table entries: 16777216
  Mountpoint-cache hash table entries: 16777216
  ftrace: allocating 20414 entries in 40 pages
  Total time: 11.798s

After fix:
  Dentry cache hash table entries: 1073741824
  Inode-cache hash table entries: 536870912
  Mount-cache hash table entries: 16777216
  Mountpoint-cache hash table entries: 16777216
  ftrace: allocating 20414 entries in 40 pages
  Total time: 3.198s

CPU: Intel Xeon E5-2630, Memory: 2.2T:
Before fix:
  Dentry cache hash table entries: 536870912
  Inode-cache hash table entries: 268435456
  Mount-cache hash table entries: 8388608
  Mountpoint-cache hash table entries: 8388608
  CPU: Physical Processor ID: 0
  Total time: 3.245s

After fix:
  Dentry cache hash table entries: 536870912
  Inode-cache hash table entries: 268435456
  Mount-cache hash table entries: 8388608
  Mountpoint-cache hash table entries: 8388608
  CPU: Physical Processor ID: 0
  Total time: 3.244s

Link: http://lkml.kernel.org/r/1488432825-92126-4-git-send-email-pasha.tatashin@oracle.comSigned-off-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: NBabu Moger <babu.moger@oracle.com>
Cc: David Miller <davem@davemloft.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit dd0db88d ("userfaultfd: non-cooperative: rollback
userfaultfd_exit") removed userfaultfd callback from exit() which makes
the include of <linux/userfaultfd_k.h> unnecessary.

Link: http://lkml.kernel.org/r/1494930907-3060-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

arch_add_memory gets for_device argument which then controls whether we
want to create memblocks for created memory sections.  Simplify the
logic by telling whether we want memblocks directly rather than going
through pointless negation.  This also makes the api easier to
understand because it is clear what we want rather than nothing telling
for_device which can mean anything.

This shouldn't introduce any functional change.

Link: http://lkml.kernel.org/r/20170515085827.16474-13-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Tested-by: NDan Williams <dan.j.williams@intel.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Tobias Regnery <tobias.regnery@gmail.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current memory hotplug implementation relies on having all the
struct pages associate with a zone/node during the physical hotplug
phase (arch_add_memory->__add_pages->__add_section->__add_zone).  In the
vast majority of cases this means that they are added to ZONE_NORMAL.
This has been so since 9d99aaa3 ("[PATCH] x86_64: Support memory
hotadd without sparsemem") and it wasn't a big deal back then because
movable onlining didn't exist yet.

Much later memory hotplug wanted to (ab)use ZONE_MOVABLE for movable
onlining 511c2aba ("mm, memory-hotplug: dynamic configure movable
memory and portion memory") and then things got more complicated.
Rather than reconsidering the zone association which was no longer
needed (because the memory hotplug already depended on SPARSEMEM) a
convoluted semantic of zone shifting has been developed.  Only the
currently last memblock or the one adjacent to the zone_movable can be
onlined movable.  This essentially means that the online type changes as
the new memblocks are added.

Let's simulate memory hot online manually
  $ echo 0x100000000 > /sys/devices/system/memory/probe
  $ grep . /sys/devices/system/memory/memory32/valid_zones
  Normal Movable

  $ echo $((0x100000000+(128<<20))) > /sys/devices/system/memory/probe
  $ grep . /sys/devices/system/memory/memory3?/valid_zones
  /sys/devices/system/memory/memory32/valid_zones:Normal
  /sys/devices/system/memory/memory33/valid_zones:Normal Movable

  $ echo $((0x100000000+2*(128<<20))) > /sys/devices/system/memory/probe
  $ grep . /sys/devices/system/memory/memory3?/valid_zones
  /sys/devices/system/memory/memory32/valid_zones:Normal
  /sys/devices/system/memory/memory33/valid_zones:Normal
  /sys/devices/system/memory/memory34/valid_zones:Normal Movable

  $ echo online_movable > /sys/devices/system/memory/memory34/state
  $ grep . /sys/devices/system/memory/memory3?/valid_zones
  /sys/devices/system/memory/memory32/valid_zones:Normal
  /sys/devices/system/memory/memory33/valid_zones:Normal Movable
  /sys/devices/system/memory/memory34/valid_zones:Movable Normal

This is an awkward semantic because an udev event is sent as soon as the
block is onlined and an udev handler might want to online it based on
some policy (e.g.  association with a node) but it will inherently race
with new blocks showing up.

This patch changes the physical online phase to not associate pages with
any zone at all.  All the pages are just marked reserved and wait for
the onlining phase to be associated with the zone as per the online
request.  There are only two requirements

	- existing ZONE_NORMAL and ZONE_MOVABLE cannot overlap

	- ZONE_NORMAL precedes ZONE_MOVABLE in physical addresses

the latter one is not an inherent requirement and can be changed in the
future.  It preserves the current behavior and made the code slightly
simpler.  This is subject to change in future.

This means that the same physical online steps as above will lead to the
following state: Normal Movable

  /sys/devices/system/memory/memory32/valid_zones:Normal Movable
  /sys/devices/system/memory/memory33/valid_zones:Normal Movable

  /sys/devices/system/memory/memory32/valid_zones:Normal Movable
  /sys/devices/system/memory/memory33/valid_zones:Normal Movable
  /sys/devices/system/memory/memory34/valid_zones:Normal Movable

  /sys/devices/system/memory/memory32/valid_zones:Normal Movable
  /sys/devices/system/memory/memory33/valid_zones:Normal Movable
  /sys/devices/system/memory/memory34/valid_zones:Movable

Implementation:
The current move_pfn_range is reimplemented to check the above
requirements (allow_online_pfn_range) and then updates the respective
zone (move_pfn_range_to_zone), the pgdat and links all the pages in the
pfn range with the zone/node.  __add_pages is updated to not require the
zone and only initializes sections in the range.  This allowed to
simplify the arch_add_memory code (s390 could get rid of quite some of
code).

devm_memremap_pages is the only user of arch_add_memory which relies on
the zone association because it only hooks into the memory hotplug only
half way.  It uses it to associate the new memory with ZONE_DEVICE but
doesn't allow it to be {on,off}lined via sysfs.  This means that this
particular code path has to call move_pfn_range_to_zone explicitly.

The original zone shifting code is kept in place and will be removed in
the follow up patch for an easier review.

Please note that this patch also changes the original behavior when
offlining a memory block adjacent to another zone (Normal vs.  Movable)
used to allow to change its movable type.  This will be handled later.

[richard.weiyang@gmail.com: simplify zone_intersects()]
  Link: http://lkml.kernel.org/r/20170616092335.5177-1-richard.weiyang@gmail.com
[richard.weiyang@gmail.com: remove duplicate call for set_page_links]
  Link: http://lkml.kernel.org/r/20170616092335.5177-2-richard.weiyang@gmail.com
[akpm@linux-foundation.org: remove unused local `i']
Link: http://lkml.kernel.org/r/20170515085827.16474-12-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NWei Yang <richard.weiyang@gmail.com>
Tested-by: NDan Williams <dan.j.williams@intel.com>
Tested-by: NReza Arbab <arbab@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # For s390 bits
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Tobias Regnery <tobias.regnery@gmail.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This header always exists, so doesn't require an ifdef around its
inclusion.  When CONFIG_ARCH_HAS_SET_MEMORY=y it includes the asm
header, otherwise it provides empty versions of the set_memory_xx()
routines.

The usages of set_memory_xx() are still guarded by
CONFIG_STRICT_MODULE_RWX.

Link: http://lkml.kernel.org/r/1498717781-29151-3-git-send-email-mpe@ellerman.id.auSigned-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NKees Cook <keescook@chromium.org>
Acked-by: NLaura Abbott <labbott@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This header always exists, so doesn't require an ifdef around its
inclusion.  When CONFIG_ARCH_HAS_SET_MEMORY=y it includes the asm
header, otherwise it provides empty versions of the set_memory_xx()
routines.

Link: http://lkml.kernel.org/r/1498717781-29151-2-git-send-email-mpe@ellerman.id.auSigned-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NKees Cook <keescook@chromium.org>
Acked-by: NLaura Abbott <labbott@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

core_kernel_text is used by MIPS in its function graph trace processing,
so having this method traced leads to an infinite set of recursive calls
such as:

  Call Trace:
     ftrace_return_to_handler+0x50/0x128
     core_kernel_text+0x10/0x1b8
     prepare_ftrace_return+0x6c/0x114
     ftrace_graph_caller+0x20/0x44
     return_to_handler+0x10/0x30
     return_to_handler+0x0/0x30
     return_to_handler+0x0/0x30
     ftrace_ops_no_ops+0x114/0x1bc
     core_kernel_text+0x10/0x1b8
     core_kernel_text+0x10/0x1b8
     core_kernel_text+0x10/0x1b8
     ftrace_ops_no_ops+0x114/0x1bc
     core_kernel_text+0x10/0x1b8
     prepare_ftrace_return+0x6c/0x114
     ftrace_graph_caller+0x20/0x44
     (...)

Mark the function notrace to avoid it being traced.

Link: http://lkml.kernel.org/r/1498028607-6765-1-git-send-email-marcin.nowakowski@imgtec.comSigned-off-by: NMarcin Nowakowski <marcin.nowakowski@imgtec.com>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The irq timings infrastructure tracks when interrupts occur in order to
statistically predict te next interrupt event.

There is no point to track timer interrupts and try to predict them because
the next expiration time is already known. This can be avoided via the
IRQF_TIMER flag which is passed by timer drivers in request_irq(). It marks
the interrupt as timer based which alloes to ignore these interrupts in the
timings code.

Per CPU interrupts which are requested via request_percpu_+irq() have no
flag argument, so marking per cpu timer interrupts is not possible and they
get tracked pointlessly.

Add __request_percpu_irq() as a variant of request_percpu_irq() with a
flags argument and make request_percpu_irq() an inline wrapper passing
flags = 0.

The flag parameter is restricted to IRQF_TIMER as all other IRQF_ flags
make no sense for per cpu interrupts.

The next step is to convert all existing users of request_percpu_irq() and
then remove the wrapper and the underscores.

[ tglx: Massaged changelog ]
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: nicolas.pitre@linaro.org
Cc: vincent.guittot@linaro.org
Cc: rafael@kernel.org
Link: http://lkml.kernel.org/r/1499344144-3964-1-git-send-email-daniel.lezcano@linaro.org

Vikram reported the following backtrace:

   BUG: scheduling while atomic: swapper/7/0/0x00000002
   CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.32-perf+ #680
   schedule
   schedule_hrtimeout_range_clock
   schedule_hrtimeout
   wait_task_inactive
   __kthread_bind_mask
   __kthread_bind
   __kthread_unpark
   kthread_unpark
   cpuhp_online_idle
   cpu_startup_entry
   secondary_start_kernel

He analyzed correctly that a parked cpu hotplug thread of an offlined CPU
was still on the runqueue when the CPU came back online and tried to unpark
it. This causes the thread which invoked kthread_unpark() to call
wait_task_inactive() and subsequently schedule() with preemption disabled.
His proposed workaround was to "make sure" that a parked thread has
scheduled out when the CPU goes offline, so the situation cannot happen.

But that's still wrong because the root cause is not the fact that the
percpu thread is still on the runqueue and neither that preemption is
disabled, which could be simply solved by enabling preemption before
calling kthread_unpark().

The real issue is that the calling thread is the idle task of the upcoming
CPU, which is not supposed to call anything which might sleep.  The moron,
who wrote that code, missed completely that kthread_unpark() might end up
in schedule().

The solution is simpler than expected. The thread which controls the
hotplug operation is waiting for the CPU to call complete() on the hotplug
state completion. So the idle task of the upcoming CPU can set its state to
CPUHP_AP_ONLINE_IDLE and invoke complete(). This in turn wakes the control
task on a different CPU, which then can safely do the unpark and kick the
now unparked hotplug thread of the upcoming CPU to complete the bringup to
the final target state.

Control CPU                     AP

bringup_cpu();
  __cpu_up()  ------------>
				bringup_ap();
  bringup_wait_for_ap()
    wait_for_completion();
                                cpuhp_online_idle();
                <------------    complete();
    unpark(AP->stopper);
    unpark(AP->hotplugthread);
                                while(1)
                                  do_idle();
    kick(AP->hotplugthread);
    wait_for_completion();	hotplug_thread()
				  run_online_callbacks();
				  complete();

Fixes: 8df3e07e ("cpu/hotplug: Let upcoming cpu bring itself fully up")
Reported-by: NVikram Mulukutla <markivx@codeaurora.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707042218020.2131@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>