- 15 10月, 2007 20 次提交
-
-
由 Christoph Hellwig 提交于
Currently xfs has a rather complicated internal scheme to allow for different directory formats in IRIX. This patch rips all code related to this out and pushes useage of the Linux filldir callback into the lowlevel directory code. This does not make the code any less portable because filldir can be used to create dirents of all possible variations (including the IRIX ones as proved by the IRIX binary emulation code under arch/mips/). This patch get rid of an unessecary copy in the readdir path, about 400 lines of code and one of the last two users of the uio structure. This version is updated to deal with dmapi aswell which greatly simplifies the get_dirattrs code. The dmapi part has been tested using the get_dirattrs tools from the xfstest dmapi suite1 with various small and large directories. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29478a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Creates a new xfs_dsb_t that is __be annotated and keeps xfs_sb_t for the incore one. xfs_xlatesb is renamed to xfs_sb_to_disk and only handles the incore -> disk conversion. A new helper xfs_sb_from_disk handles the other direction and doesn't need the slightly hacky table-driven approach because we only ever read the full sb from disk. The handling of shared r/o filesystems has been buggy on little endian system and fixing this required shuffling around of some code in that area. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29477a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Biggest bit is duplicating the dinode structure so we have one annotated for native endianess and one for disk endianess. The other significant change is that xfs_xlate_dinode_core is split into one helper per direction to allow for proper annotations, everything else is trivial. As a sidenode splitting out the incore dinode means we can move it into xfs_inode.h in a later patch and severely improving on the include hell in xfs. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29476a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Michal Piotrowski 提交于
In sgi mod# xfs-linux-melb:xfs-kern:29319a, the variable renaming was not complete and variable 'b' was left unchanged for non-lbd 32 bit machines. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29469a Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
SGI-PV: 969372 SGI-Modid: xfs-linux-melb:xfs-kern:29444a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NVlad Apostolov <vapo@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 968690 SGI-Modid: xfs-linux-melb:xfs-kern:29340a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NVlad Apostolov <vapo@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Jesper Juhl 提交于
If we fail to open the the log device buftarg, we can fall through to error handling code that fails to check for a NULL log device buftarg before calling xfs_free_buftarg(). This patch fixes the issue by checking mp->m_logdev_targp against NULL in xfs_unmountfs_close() and doing the proper xfs_blkdev_put(logdev); and xfs_blkdev_put(rtdev); on (!mp->m_rtdev_targp) in xfs_mount(). Discovered by the Coverity checker. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29328a Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
xfs_start_flags can make use of is_power_of_2 to tidy up the test a little bit. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29327a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Generally we try not to directly include linux header files in core xfs code; xfs_linux.h is the spot for that. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29326a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Now that nobody's using it, remove xfs_physmem & friends. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29325a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Remove scaling of inode "clusters" based on machine memory; small cluster cut-point was an unrealistic 32MB and was probably never tested. Removes another user of xfs_physmem. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29324a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Remove sizing of logbuf size & count based on physical memory; this was never a very good gauge as it's looking at global memory, but deciding on sizing per-filesystem; no account is made of the total number of filesystems, for example. For now just take the largest "default" case, as was set for machines with >400MB - 8 x 32k buffers. This can always be tuned higher or lower with mount options if necessary. Removes one more user of xfs_physmem. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29323a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
m_nreadaheads in the mount struct is never used; remove it and the various macros assigned to it. Also remove a couple other unused macros in the same areas. Removes one user of xfs_physmem. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29322a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29321a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
The BMBT_*BITLEN are currently defined in a complicated way depending on XFS_NATIVE_HOST. But if all the macros are expanded they (obviously) expand to the same value for both cases. This patch defines the macros in the most simple way and updates the comment describing them to remove outdated bits. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29320a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
xfs_bmbt_set_all/xfs_bmbt_disk_set_all are identical to xfs_bmbt_set_allf/xfs_bmbt_disk_set_allf except that the former take a xfs_bmbt_irec_t and the latter take the individual extent fields as scalar values. This patch reimplements xfs_bmbt_set_all/xfs_bmbt_disk_set_all as trivial wrappers around xfs_bmbt_set_allf/xfs_bmbt_disk_set_allf and cleans up the variable naming in xfs_bmbt_set_allf/xfs_bmbt_disk_set_allf to have some meaning instead of one char variable names. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29319a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
currently xfs_bmbt_rec_t is used both for ondisk extents as well as host-endian ones. This patch adds a new xfs_bmbt_rec_host_t for the native endian ones and cleans up the fallout. There have been various endianess issues in the tracing / debug printf code that are fixed by this patch. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29318a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29317a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Vlad Apostolov 提交于
SGI-PV: 967674 SGI-Modid: xfs-linux-melb:xfs-kern:29211a Signed-off-by: NVlad Apostolov <vapo@sgi.com> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 David Chinner 提交于
If the underlying block device suddenly stops supporting barriers, we need to handle the -EOPNOTSUPP error in a sane manner rather than shutting down the filesystem. If we get this error, clear the barrier flag, reissue the I/O, and tell the world bad things are occurring. SGI-PV: 964544 SGI-Modid: xfs-linux-melb:xfs-kern:28568a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 01 10月, 2007 2 次提交
-
-
由 Tim Shimmin 提交于
This reverts commit b394e43e. Lachlan McIlroy says: It tried to fix an issue where log replay is replaying an inode cluster initialisation transaction that should not be replayed because the inode cluster on disk is more up to date. Since we don't log file sizes (we rely on inode flushing to get them to disk) then we can't just replay all the transations in the log and expect the inode to be completely restored. We lose file size updates. Unfortunately this fix is causing more (serious) problems than it is fixing. SGI-PV: 969656 SGI-Modid: xfs-linux-melb:xfs-kern:29804a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Tim Shimmin 提交于
This reverts commit b394e43e. SGI-PV: 969656 SGI-Modid: xfs-linux-melb:xfs-kern:29804a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 20 9月, 2007 2 次提交
-
-
由 Christoph Hellwig 提交于
The new xlog_recover_do_reg_buffer checks call be16_to_cpu on di_gen which is a 32bit value so sparse rightly complains. Fortunately the warning is harmless because we don't care for the value, but only whether it's non-NULL. Due to that fact we can simply kill the endian swaps on this and the previous di_mode check entirely. SGI-PV: 969656 SGI-Modid: xfs-linux-melb:xfs-kern:29709a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
xfs_filestream_mount() sets up an mru cache with: err = xfs_mru_cache_create(&mp->m_filestream, lifetime, grp_count, (xfs_mru_cache_free_func_t)xfs_fstrm_free_func); but that cast is causing problems... typedef void (*xfs_mru_cache_free_func_t)(unsigned long, void*); but: void xfs_fstrm_free_func( xfs_ino_t ino, fstrm_item_t *item) so on a 32-bit box, it's casting (32, 32) args into (64, 32) and I assume it's getting garbage for *item, which subsequently causes an explosion. With this change the filestreams xfsqa tests don't oops on my 32-bit box. SGI-PV: 967795 SGI-Modid: xfs-linux-melb:xfs-kern:29510a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 18 9月, 2007 2 次提交
-
-
由 Lachlan McIlroy 提交于
SGI-PV: 969656 SGI-Modid: xfs-linux-melb:xfs-kern:29676a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Lachlan McIlroy 提交于
SGI-PV: 968767 SGI-Modid: xfs-linux-melb:xfs-kern:29675a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 17 9月, 2007 1 次提交
-
-
由 David Chinner 提交于
Instead of running the mru cache reaper all the time based on a timeout, we should only run it when the cache has active objects. This allows CPUs to sleep when there is no activity rather than be woken repeatedly just to check if there is anything to do. SGI-PV: 968554 SGI-Modid: xfs-linux-melb:xfs-kern:29305a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 05 9月, 2007 6 次提交
-
-
由 Eric Sandeen 提交于
This git mod: 77e4635a converted to a "greedy" allocation interface, but for the quota hashtables it switched from allocating XFS_QM_HASHSIZE (nr of elements) xfs_dqhash_t's to allocating only XFS_QM_HASHSIZE *bytes* - quite a lot smaller! Then when we converted hsize "back" to nr of elements (the division line) hsize went to 0. This was leading to oopses when running any quota tests on the Fedora 8 test kernel, but the problem has been there for almost a year. SGI-PV: 968837 SGI-Modid: xfs-linux-melb:xfs-kern:29354a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
- in xfs_probe_cluster rename the inner len to pg_len. There's no harm here because the outer len isn't used after the inner len comes into existence but it keeps the code clean. - in xfs_da_do_buf remove the inner i because they don't overlap and they are both the same type. SGI-PV: 968555 SGI-Modid: xfs-linux-melb:xfs-kern:29311a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
- remove the != 0 inside the unlikely in ASSERT_ALWAYS because sparse now complains about comparisons between pointers and 0 - add a standalone ASSERT implementation because defining it to ASSERT_ALWAYS means the string is expanded before the token passing stringification. This way we get the actual content of the assertion in the assfail message and don't overflow sparse's stringification buffer leading to sparse error messages. SGI-PV: 968555 SGI-Modid: xfs-linux-melb:xfs-kern:29310a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
We can't return a masked result of a __bitwise type. Compare it to 0 first to keep the behaviour without the warning. SGI-PV: 968555 SGI-Modid: xfs-linux-melb:xfs-kern:29309a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Sparse now warns about comparing pointers to 0, so change all instance where that happens to NULL instead. SGI-PV: 968555 SGI-Modid: xfs-linux-melb:xfs-kern:29308a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 David Chinner 提交于
SGI-PV: 968554 SGI-Modid: xfs-linux-melb:xfs-kern:29303a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 27 7月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 7月, 2007 4 次提交
-
-
由 Paul Mundt 提交于
Slab destructors were no longer supported after Christoph's c59def9f change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nick Piggin 提交于
Change ->fault prototype. We now return an int, which contains VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte. FAULT_RET_ code tells the VM whether a page was found, whether it has been locked, and potentially other things. This is not quite the way he wanted it yet, but that's changed in the next patch (which requires changes to arch code). This means we no longer set VM_CAN_INVALIDATE in the vma in order to say that a page is locked which requires filemap_nopage to go away (because we can no longer remain backward compatible without that flag), but we were going to do that anyway. struct fault_data is renamed to struct vm_fault as Linus asked. address is now a void __user * that we should firmly encourage drivers not to use without really good reason. The page is now returned via a page pointer in the vm_fault struct. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Fix the race between invalidate_inode_pages and do_no_page. Andrea Arcangeli identified a subtle race between invalidation of pages from pagecache with userspace mappings, and do_no_page. The issue is that invalidation has to shoot down all mappings to the page, before it can be discarded from the pagecache. Between shooting down ptes to a particular page, and actually dropping the struct page from the pagecache, do_no_page from any process might fault on that page and establish a new mapping to the page just before it gets discarded from the pagecache. The most common case where such invalidation is used is in file truncation. This case was catered for by doing a sort of open-coded seqlock between the file's i_size, and its truncate_count. Truncation will decrease i_size, then increment truncate_count before unmapping userspace pages; do_no_page will read truncate_count, then find the page if it is within i_size, and then check truncate_count under the page table lock and back out and retry if it had subsequently been changed (ptl will serialise against unmapping, and ensure a potentially updated truncate_count is actually visible). Complexity and documentation issues aside, the locking protocol fails in the case where we would like to invalidate pagecache inside i_size. do_no_page can come in anytime and filemap_nopage is not aware of the invalidation in progress (as it is when it is outside i_size). The end result is that dangling (->mapping == NULL) pages that appear to be from a particular file may be mapped into userspace with nonsense data. Valid mappings to the same place will see a different page. Andrea implemented two working fixes, one using a real seqlock, another using a page->flags bit. He also proposed using the page lock in do_no_page, but that was initially considered too heavyweight. However, it is not a global or per-file lock, and the page cacheline is modified in do_no_page to increment _count and _mapcount anyway, so a further modification should not be a large performance hit. Scalability is not an issue. This patch implements this latter approach. ->nopage implementations return with the page locked if it is possible for their underlying file to be invalidated (in that case, they must set a special vm_flags bit to indicate so). do_no_page only unlocks the page after setting up the mapping completely. invalidation is excluded because it holds the page lock during invalidation of each page (and ensures that the page is not mapped while holding the lock). This also allows significant simplifications in do_no_page, because we have the page locked in the right place in the pagecache from the start. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 7月, 2007 2 次提交
-
-
由 David Chinner 提交于
When changing the file size by a truncate() call, we log the change in the inode size. However, we do not flush any outstanding data that might not have been written to disk, thereby violating the data/inode size update order. This can leave files full of NULLs on crash. Hence if we are truncating the file, flush any unwritten data that may lie between the curret on disk inode size and the new inode size that is being logged to ensure that ordering is preserved. SGI-PV: 966308 SGI-Modid: xfs-linux-melb:xfs-kern:29174a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 David Chinner 提交于
Make the free file space transaction able to dip into the reserved blocks to ensure that we can successfully free blocks when the filesystem is at ENOSPC. SGI-PV: 967788 SGI-Modid: xfs-linux-melb:xfs-kern:29167a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NVlad Apostolov <vapo@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-