- 11 2月, 2016 40 次提交
-
-
由 Matthew Dawson 提交于
When the radeon driver resets a gpu, it attempts to test whether all the rings can successfully handle an IB. If these rings fail to respond, the process will wait forever. Another gpu reset can't happen at this point, as the current reset holds a lock required to do so. Instead, make all the IB tests run with a timeout, so the system can attempt to recover in this case. While this doesn't fix the underlying issue with card resets failing, it gives the system a higher chance of recovering. These timeouts have been confirmed to help both a Tathi and Hawaii card recover after a gpu reset. This also adds a new function, radeon_fence_wait_timeout, that behaves like fence_wait_timeout. It is used instead of fence_wait_timeout as it continues to work during a reset. radeon_fence_wait is changed to be implemented using this function. V2: - Changed the timeout to 1s, as the default 10s from radeon_wait_timeout was too long. A timeout of 100ms was tested and found to be too short. - Changed radeon_fence_wait_timeout to behave more like fence_wait_timeout. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMatthew Dawson <matthew@mjdsystems.ca> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Drop needless function wrapper. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Move that out of the main IOCTL function. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
And use it in UVD/VCE command patching. v2: squash in Christian's fix Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
We only need a few dw here. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
VBIOS does this for us in asic_init. v2: update iceland as well Reviewed-by: NMonk Liu <monk.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
VBIOS does this for us in asic_init. Reviewed-by: NMonk Liu <monk.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Generally a good idea between VM sessions. We need a way to detect VM pass-through in general and always run asic_init in that case. Reviewed-by: NMonk Liu <monk.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Required to make desicions about certain code pathes. Reviewed-by: NMonk Liu <monk.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This table is found on boards that support SR-IOV. This will be used to determine if the board supports SR-IOV and allow the driver to take specific action in certain cases. Reviewed-by: NMonk Liu <monk.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
amdgpu_boot_test_post_card() is not used anywhere. Probably a leftover from the original port from radeon. Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NTom St Denis <tom.stdenis@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
ACP IP have internal DMA controller, DW I2S controller and DSPs as separate power tiles. DMA and I2S devices are added to generic pm domain, so that entire IP can be powered off/on at appropriate times. Unused DSPs are made to be powered off though they are powered on during ACP pm domain power on sequence. Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Maruthi Bayyavarapu 提交于
This adds the ACP (Audio CoProcessor) IP driver and wires it up to the amdgpu driver. The ACP block provides the DMA engine for i2s based ALSA driver. This is required for audio on APUs that utilize an i2s codec. Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NMurali Krishna Vemuri <murali-krishna.vemuri@amd.com> Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
That works with other values as well. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Don't calculate the end address multiple times. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Neither the global nor the local mutex exists any more and amdgpu doesn't support cayman. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
No need to fence every page table, just the page directory is enough. Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
If we can't copy entries from the GTT or fill them with one command split up the mapping operation into multiple ones. v2: agd: rebase on upstream v3: squash in Christian's fix Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
That allows the VM code to use GART BOs from other driver instances. v2: don't use copy optimization for foreign GARTs, that won't work. v3: some more comment cleanups v4: agd: rebase on upstream Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
No need to duplicate that code over and over again. Also stop using the flags to determine if we need to map the addresses. v2: constify the pages_addr v3: rebased, fix typo in commit message Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Those are just leftovers from the time we wrote the VM updates directly to the ring. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Crashing the system doesn't helps at all. Also properly return -EINVAL if size or alignment are outside valid ranges. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
since the dependency job is also scheduled by the same scheduler with the job depended on it, no need to call wake up scheduler when the dep is scheduled. Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This adds the DCE8 enum header. Acked-by: NHarry Wentland <harry.wentland@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
These add the interfaces for manual clock control. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
These add the interfaces for manual clock control. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
The new sysfs interfaces: pp_num_states: Read-only, return the number of all pp states, 0 if powerplay is not available. pp_cur_state: Read-only, return the index number of current pp state. pp_force_state: Read-write, to write a power state index will switch to selected state forcedly and enable forced state mode, disable forced state mode. such as "echo >...". pp_table: Read-write, binary output, to be used to read or write the dpm table, the maximum file size is 4KB of page size. pp_dpm_sclk: Read-write, reading will return a dpm levels list, to write an index number will force powerplay to set the corresponding dpm level. pp_dpm_mclk: same as sclk. pp_dpm_pcie: same as sclk. And add new setting "manual" to the existing interface power_dpm_force_performance_level. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
With the scheduler enabled we don't need that any more. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
It's not needed any more because all access goes through the scheduler now. v2: Update commit message. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
With the scheduler enabled managing per ring LRUs don't make much sense any more. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
No need for an extra function any more. v2: comment cleanups Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
This allows the scheduler to handle the dependencies on ID contention as well. v2: grab id only once v3: use a separate lock for the VMIDs v4: cleanup after semaphore removal v5: minor coding style change Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Because of the scheduler all traces come from the same thread now and can't be distincted otherwise. Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
It doesn't currently do anything and there's no need for it going forward since pci config reset will be required as a fallback even when we have fine grained reset implemented. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Ported from similar code in radeon. Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NKen Wang <Qingqing.Wang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Posting is required after a pci config reset. Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NKen Wang <Qingqing.Wang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Drop soft reset, always use pci config reset. Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NKen Wang <Qingqing.Wang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Drop soft reset, always use pci config reset. Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NKen Wang <Qingqing.Wang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Not used any more without semaphores Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-