Signed-off-by: NRami Rosen <ramirose@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJorge Boncompte <jorge@dti2.net>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoonwoo Park <joonwpark81@gmail.com>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>

Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Let's nip the code duplication in the bud :)
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When netfilter is off the transport-mode async resumption doesn't work
because we don't push back the IP header.  This patch fixes that by
moving most of the code outside of ifdef NETFILTER since the only part
that's not common is the short-circuit in the protocol handler.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the output transform returns EINPROGRESS due to async operation we'll
free the skb the straight away as if it were an error.  This patch fixes
that so that the skb is freed when the async operation completes.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reported by Denis V. Lunev
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While checking Gavin's patch I noticed that the returned seq_rtt
is not used by the caller.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If snd_wnd - snd_nxt wasn't multiple of MSS, skb was split on
odd boundary by the callers of tcp_window_allows.

We try really hard to avoid unnecessary modulos. Therefore the
old caller side check "if (skb->len < limit)" was too wide as
well because limit is not bound in any way to skb->len and can
cause spurious testing for trimming in the middle of the queue
while we only wanted that to happen at the tail of the queue.
A simple additional caller side check for tcp_write_queue_tail
would likely have resulted 2 x modulos because the limit would
have to be first calculated from window, however, doing that
unnecessary modulo is not mandatory. After a minor change to
the algorithm, simply determine first if the modulo is needed
at all and at that point immediately decide also from which
value it should be calculated from.

This approach also kills some duplicated code.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

print_mac() used many most net drivers and format_addr() used by
net-sysfs.c are very similar and they can be intergrated.

format_addr() is also identically redefined in the qla4xxx iscsi
driver.

Export a new function sysfs_format_mac() to be used by net-sysfs,
qla4xxx and others in the future.  Both print_mac() and
sysfs_format_mac() call _format_mac_addr() to do the formatting.

Changed print_mac() to use unsigned char * to be consistent with
net_device struct's dev_addr.  Added buffer length overrun checking
as suggested by Joe Perches.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sk_forward_alloc being signed, we should take care of divides by
SK_STREAM_MEM_QUANTUM we do in sk_stream_pages() and
__sk_stream_mem_reclaim()

This patchs introduces SK_STREAM_MEM_QUANTUM_SHIFT, defined
as ilog2(SK_STREAM_MEM_QUANTUM), to be able to use right
shifts instead of plain divides.

This should help compiler to choose right shifts instead of
expensive divides (as seen with CONFIG_CC_OPTIMIZE_FOR_SIZE=y on x86)
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I'm actually surprised at how much was involved.  At first glance it
appears that the neighbour table data structures are already split by
network device so all that should be needed is to modify the user
interface commands to filter the set of neighbours by the network
namespace of their devices.

However a couple things turned up while I was reading through the
code.  The proxy neighbour table allows entries with no network
device, and the neighbour parms are per network device (except for the
defaults) so they now need a per network namespace default.

So I updated the two structures (which surprised me) with their very
own network namespace parameter.  Updated the relevant lookup and
destroy routines with a network namespace parameter and modified the
code that interacts with users to filter out neighbour table entries
for devices of other namespaces.

I'm a little concerned that we can modify and display the global table
configuration and from all network namespaces.  But this appears good
enough for now.

I keep thinking modifying the neighbour table to have per network
namespace instances of each table type would should be cleaner.  The
hash table is already dynamically sized so there are it is not a
limiter.  The default parameter would be straight forward to take care
of.  However when I look at the how the network table is built and
used I still find some assumptions that there is only a single
neighbour table for each type of table in the kernel.  The netlink
operations, neigh_seq_start, the non-core network users that call
neigh_lookup.  So while it might be doable it would require more
refactoring than my current approach of just doing a little extra
filtering in the code.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to RFC4303, section 3.3.3 we need to drop outgoing packets which
cause the replay counter to overflow:

   3.3.3.  Sequence Number Generation

   The sender's counter is initialized to 0 when an SA is established.
   The sender increments the sequence number (or ESN) counter for this
   SA and inserts the low-order 32 bits of the value into the Sequence
   Number field.  Thus, the first packet sent using a given SA will
   contain a sequence number of 1.

   If anti-replay is enabled (the default), the sender checks to ensure
   that the counter has not cycled before inserting the new value in the
   Sequence Number field.  In other words, the sender MUST NOT send a
   packet on an SA if doing so would cause the sequence number to cycle.
   An attempt to transmit a packet that would result in sequence number
   overflow is an auditable event.  The audit log entry for this event
   SHOULD include the SPI value, current date/time, Source Address,
   Destination Address, and (in IPv6) the cleartext Flow ID.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a number of new IPsec audit events to meet the auditing
requirements of RFC4303.  This includes audit hooks for the following events:

 * Could not find a valid SA [sections 2.1, 3.4.2]
   . xfrm_audit_state_notfound()
   . xfrm_audit_state_notfound_simple()

 * Sequence number overflow [section 3.3.3]
   . xfrm_audit_state_replay_overflow()

 * Replayed packet [section 3.4.3]
   . xfrm_audit_state_replay()

 * Integrity check failure [sections 3.4.4.1, 3.4.4.2]
   . xfrm_audit_state_icvfail()

While RFC4304 deals only with ESP most of the changes in this patch apply to
IPsec in general, i.e. both AH and ESP.  The one case, integrity check
failure, where ESP specific code had to be modified the same was done to the
AH code for the sake of consistency.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_win_from_space() being signed, compiler might emit an integer divide
to compute tcp_win_from_space()/2 .

Using right shifts is OK here and less expensive.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_mtu_to_mss() being signed, compiler might emit an integer divide
to compute tcp_mtu_to_mss()/2 .

Using a right shift is OK here and less expensive.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Down into the only scope where it is used.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because sk_wmem_queued, sk_sndbuf are signed, a divide per two
may force compiler to use an integer divide.

We can instead use a right shift.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before submiting a patch to change a divide to a right shift, I felt
necessary to create a helper function tcp_mtu_probing() to reduce length of
lines exceeding 100 chars in tcp_write_timeout().
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since 'goal' is a signed int, compiler may emit an integer divide
to compute goal/2.

Using a right shift is OK here and less expensive.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several length variables cannot be negative, so convert int to
unsigned int.  This also allows us to do sane shift operations
on those variables.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to the standard, the field cannot be present, so don't
try to interpret it either.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: Daniel Drake <dsd@gentoo.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the decision making about whether a frame is encrypted
with a certain algorithm up into the TX handlers rather than having it
in the crypto algorithm implementation.

This fixes a problem with the radiotap injection code where injecting
a non-data packet and requesting encryption could end up asking the
driver to encrypt a packet without giving it a key.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This implements the required cfg80211 callback in mac80211
to allow userspace to get station statistics.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After a station is added to the kernel's structures, userspace
has to be able to retrieve statistics about that station, especially
whether the station was idle and how much bytes were transferred
to and from it. This adds the necessary code to nl80211.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds station handling to cfg80211/nl80211.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds the necessary API to cfg80211/nl80211 to allow
changing beaconing settings.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This implements cfg80211's get_key() to allow retrieving the sequence
counter for a TKIP or CCMP key from userspace. It also cleans up and
documents the associated low-level driver interface.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds the necessary hooks to mac80211 to allow userspace
to edit keys with cfg80211 (through nl80211.)
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This introduces key handling to cfg80211/nl80211. Default
and group keys can be added, changed and removed; sequence
counters for each key can be retrieved.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>