sys_ppoll syscall needs to use a compat handler on 64bit kernels with o32
user-space.
Signed-off-by: NArnaud Patard <apatard@mandriva.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Unify the naming method between kernel and the user-space oprofile tool.
Because loongson is used instead of godson in most of the places, we agreed
to use loongson instead, which will simplify future maintenance.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Acked-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The handle_edge_irq() flowhandler disables edge int sources which occur
too fast (i.e. another edge comes in before the irq handler function
had a chance to finish).  Currently, the mask_ack() callback does not
ack the edges in hardware, leading to an endless loop in the flowhandler
where it tries to shut up the irq source.

When I rewrote the alchemy IRQ code  I wrongly assumed the mask_ack()
callback was only used by the level flowhandler, hence it omitted the
(at the time pointless) edge acks.  Turned out I was wrong; so here
is a complete mask_ack implementation for Alchemy IC, which fixes
the above mentioned problem.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

TXx9 SPI bit rate is calculated by:
	fBR = fSPI / 2 / (n + 1)
	(fSPI is SPI master clock freq, i.e. imbusclk freq.)
So use imbus_clk / 2 as a spi-baseclk.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

For consistency with other BCM63xx SoC set the CPU name to "Broadcom
BCM6338" when actually running on that system.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Loongson 2 does not have dcache aliases when is using 16k pages. and the

And because Loongson 2 doesn't do SMP , cpu_icache_snoops_remote_store does
not matter here.
Signed-off-by: NZhang Le <r0bertz@gentoo.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

set_saved_sp reads Context register. Avoid reading stale value from
earlier incomplete write.

Issue found and fixed for head.S by Chris Dearman <chris@mips.com>.
Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Some newer Octeon chips have registers that allow lockless operation of
the interrupt controller.  Take advantage of them.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since the locks are used from interrupt context we need the
irqsave/irqrestore versions of the locking functions.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: Chris Dearman (chris@mips.com)
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch ensures that the sign bit is always updated for NaN operands.
Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Based on original patch by Chris Dearman <chris@mips.com>.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This fixes the remaining problems introduced by
f1974653 (incorrect access length &
byteswapping in bigendian mode)
Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On an SMP system with cache aliases, the following sequence of events may
happen:

1) copy_user_highpage() runs on CPU0, invoking kmap_coherent() to create a
   temporary mapping in the fixmap region
2) copy_page() starts on CPU0
3) CPU1 sends CPU0 an IPI asking CPU0 to run local_r4k_flush_cache_page()
4) CPU0 takes the interrupt, interrupting copy_page()
5) local_r4k_flush_cache_page() on CPU0 calls kmap_coherent() again
6) The second invocation of kmap_coherent() on CPU0 tries to use the
   same fixmap virtual address that was being used by copy_user_highpage()
7) CPU0 throws a machine check exception for the TLB address conflict

Fixed by creating an extra set of fixmap entries for use in interrupt
handlers.  This prevents fixmap VA conflicts between copy_user_highpage()
running in user context, and local_r4k_flush_cache_page() invoked from an
SMP IPI.
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch checks if the watchdog enable bit is set in the DCL register
meaning that the hardware watchdog actually works and if so, register the
ar7_wdt platform_device.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch prepares the board code to register a bcm63xx_wdt
platform_device that we are going to use in a subsequent patch.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch removes the calls to bcm63xx_uart_register in board_bcm963xx.c
and make bcm63xx_uart_register an initfunc.  Allows us to remove
bcm63xx_dev_uart.h which was there to make checkpatch.pl happy.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch fixes the following warning, which becomes an error due to
-Werror to be turned on:
  CC      arch/mips/alchemy/common/gpiolib-au1000.o
cc1: warnings being treated as errors
arch/mips/alchemy/common/gpiolib-au1000.c: In function 'au1100_gpio2_to_irq':
/home/florian/dev/kernel/linux-queue/arch/mips/include/asm/mach-au1x00/gpio-au1000.h:107: warning: control reaches end of non-void function
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch fixes a lockup on BCM6345 where setting the PLL soft reset bit
will also lock the other blocks including UART.  Instead of setting only
the PLL soft reset bit in the software reset register, set this bit but do
not touch the others.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Error was introduced by commit 0385d1f3d394c6814be0b165c153fc3fc254469a.
Signed-off-by: NRalf Roesch <ralf.roesch@rw-gmbh.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As the commit 3ee4c147 shows, we need to "Add IRQF_TIMER flag for timer
interrupts", Atsushi Nemoto have reported that some other timer interrupts
should be considered, Here it is.
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

An o32 aplication passes a 64-bit value in a pair of registers; a 64-bit
kernel expects a 64-bit argument in a single register.
Signed-off-by: NChen Jie <chenj@lemote.com>
Signed-off-by: NHu Hongbing <huhb@lemote.com>
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Reported-by: NJosip Rodin <joy@entuzijast.net>

Along the lines of d6c585a4, add IRQF_TIMER
flag for all timer interrupts  This ensures that timer interrupts won't be
disabled on suspend and not threaded for PREEMPT_RT.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

That code is executed with irq disabled already, so, remove the redundant
local_irq_disable() here.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Broken by 182a85f8.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We've silently been relying on the hardware chopping off excess, reserved
ASID bits for no better reason that it saving an instruction.  Because we
already have:

#define cpu_asid(cpu, mm)       (cpu_context((cpu), (mm)) & ASID_MASK)

in <asm/mmu_context.h>.

We can use a cleanup to avoid writing non-zero bits into the reserved
entryhi bits.  This avoid triggering some debugging assertion in the
Cavium simulator.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Some firmware may pass well over 256 bytes these days.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: fix wireless drivers depends
  Staging: wireless drivers Kconfig change
  Staging: android: mark subsystem as broken
  Staging: remove stlc45xx driver
  Staging: rtl8187se/rtl8192e/rtl8192su: allow module unload
  Staging: vt6656: fix the memory free bug in vntwusb_disconnect()
  Staging: Panel: prevent driver from calling misc_deregister twice on same ressource
  Staging: hv: fix oops in vmbus - missing #include
  Staging: hv: fix oops in vmbus - netvsc list_head
  Staging: hv: fix oops in vmbus - udev events
  Staging: hv: Fix vmbus load hang caused by faulty data packing
  Staging: hv: Fix null pointer error after vmbus loading
  Staging: hv TODO patches

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: fsl_udc_core: Fix kernel oops on module removal
  USB: option: TLAYTECH TUE800 support
  USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is set
  USB: serial: sierra driver autopm fixes
  USB: serial: sierra driver send_setup() autopm fix
  USB: rndis_host: debug info clobbered before it is logged