- 09 1月, 2011 1 次提交
-
-
由 Cyrill Gorcunov 提交于
Don found that P4 PMU reads CCCR register instead of counter itself (in attempt to catch unflagged event) this makes P4 NMI handler to consume all NMIs it observes. So the other NMI users such as kgdb simply have no chance to get NMI on their hands. Side note: at moment there is no way to run nmi-watchdog together with perf tool. This is because both 'perf top' and nmi-watchdog use same event. So while nmi-watchdog reserves one event/counter for own needs there is no room for perf tool left (there is a way to disable nmi-watchdog on boot of course). Ming has tested this patch with the following results | 1. watchdog disabled | | kgdb tests on boot OK | perf works OK | | 2. watchdog enabled, without patch perf-x86-p4-nmi-4 | | kgdb tests on boot hang | | 3. watchdog enabled, without patch perf-x86-p4-nmi-4 and do not run kgdb | tests on boot | | "perf top" partialy works | cpu-cycles no | instructions yes | cache-references no | cache-misses no | branch-instructions no | branch-misses yes | bus-cycles no | | 4. watchdog enabled, with patch perf-x86-p4-nmi-4 applied | | kgdb tests on boot OK | perf does not work, NMI "Dazed and confused" messages show up | Which means we still have problems with p4 box due to 'unknown' nmi happens but at least it should fix kgdb test cases. Reported-by: NJason Wessel <jason.wessel@windriver.com> Reported-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Acked-by: NDon Zickus <dzickus@redhat.com> Acked-by: NLin Ming <ming.m.lin@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4D275E7E.3040903@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 1月, 2011 1 次提交
-
-
由 Frederic Weisbecker 提交于
From the x86_64 low level interrupt handlers, the frame pointer is saved right after the partial pt_regs frame. rbp is not supposed to be part of the irq partial saved registers, but it only requires to extend the pt_regs frame by 8 bytes to do so, plus a tiny stack offset fixup on irq exit. This changes a bit the semantics or get_irq_entry() that is supposed to provide only the value of caller saved registers and the cpu saved frame. However it's a win for unwinders that can walk through stack frames on top of get_irq_regs() snapshots. A noticeable impact is that it makes perf events cpu-clock and task-clock events based callchains working on x86_64. Let's then save rbp into the irq pt_regs. As a result with: perf record -e cpu-clock perf bench sched messaging perf report --stdio Before: 20.94% perf [kernel.kallsyms] [k] lock_acquire | --- lock_acquire | |--44.01%-- __write_nocancel | |--43.18%-- __read | |--6.08%-- fork | create_worker | |--0.88%-- _dl_fixup | |--0.65%-- do_lookup_x | |--0.53%-- __GI___libc_read --4.67%-- [...] After: 19.23% perf [kernel.kallsyms] [k] __lock_acquire | --- __lock_acquire | |--97.74%-- lock_acquire | | | |--21.82%-- _raw_spin_lock | | | | | |--37.26%-- unix_stream_recvmsg | | | sock_aio_read | | | do_sync_read | | | vfs_read | | | sys_read | | | system_call | | | __read | | | | | |--24.09%-- unix_stream_sendmsg | | | sock_aio_write | | | do_sync_write | | | vfs_write | | | sys_write | | | system_call | | | __write_nocancel v2: Fix cfi annotations. Reported-by: NSoeren Sandmann Pedersen <sandmann@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Jan Beulich <JBeulich@novell.com>
-
- 07 1月, 2011 13 次提交
-
-
由 Rakib Mullick 提交于
In dump_stack function, bp isn't used anymore, which is introduced by commit 9c0729dc. This patch removes bp completely. Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com> Cc: Soeren Sandmann <sandmann@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <AANLkTik9U_Z0WSZ7YjrykER_pBUfPDdgUUmtYx=R74nL@mail.gmail.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Don Zickus 提交于
Just re-arrange the code a bit to make it easier to follow what is going on. Basically un-negating the if-statement and swapping the code inside the if-statement with code outside. No functional changes. Originally-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-7-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Don Zickus 提交于
In original NMI handler, NMI reason io port (0x61) is only processed on BSP. This makes it impossible to hot-remove BSP. To solve the issue, a raw spinlock is used to allow the port to be processed on any CPU. Originally-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-6-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Don Zickus 提交于
With priorities in place and no one really understanding the difference between DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI. This also simplifies default_do_nmi() a little bit. Instead of calling the die_notifier in both the if and else part, just pull it out and call it before the if-statement. This has the side benefit of avoiding a call to the ioport to see if there is an external NMI sitting around until after the (more frequent) internal NMIs are dealt with. Patch-Inspired-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Don Zickus 提交于
In order to consolidate the NMI die_chain events, we need to setup the priorities for the die notifiers. I started by defining a bunch of common priorities that can be used by the notifier blocks. Then I modified the notifier blocks to use the newly created priorities. Now that the priorities are straightened out, it should be easier to remove the event DIE_NMI_IPI. Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-4-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Don Zickus 提交于
They are a handful of places in the code that register a die_notifier as a catch all in case no claims the NMI. Unfortunately, they trigger on events like DIE_NMI and DIE_NMI_IPI, which depending on when they registered may collide with other handlers that have the ability to determine if the NMI is theirs or not. The function unknown_nmi_error() makes one last effort to walk the die_chain when no one else has claimed the NMI before spitting out messages that the NMI is unknown. This is a better spot for these devices to execute any code without colliding with the other handlers. The two drivers modified are only compiled on x86 arches I believe, so they shouldn't be affected by other arches that may not have DIE_NMIUNKNOWN defined. Signed-off-by: NDon Zickus <dzickus@redhat.com> Cc: Russ Anderson <rja@sgi.com> Cc: Corey Minyard <minyard@acm.org> Cc: openipmi-developer@lists.sourceforge.net Cc: dann frazier <dannf@hp.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-3-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Huang Ying 提交于
Replace the NMI related magic numbers with symbol constants. Memory parity error is only valid for IBM PC-AT, newer machine use bit 7 (0x80) of 0x61 port for PCI SERR. While memory error is usually reported via MCE. So corresponding function name and kernel log string is changed. But on some machines, PCI SERR line is still used to report memory errors. This is used by EDAC, so corresponding EDAC call is reserved. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-2-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
Adds perf_event_time() to try and centralize access to event timing and in particular ctx->time. Prepares for cgroup support. Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d22059c.122ae30a.5e0e.ffff8b8b@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
Replace all occurrences of: event->cpu != -1 && event->cpu == smp_processor_id() by a call to: event_filter_match(event) This makes the code more consistent and will make the cgroup patch smaller. Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d220593.2308e30a.48c5.ffff8ae9@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
In particular this patch move perf_event_exit_task() before cgroup_exit() to allow for cgroup support. The cgroup_exit() function detaches the cgroups attached to a task. Other movements include hoisting some definitions and inlines at the top of perf_event.c Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d22058b.cdace30a.4657.ffff95b1@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Lin Ming 提交于
Since commit 69aad6f1(perf tools: Introduce event selectors), only perf_event_attr::type and ::config are passed to event selector, which makes perf tool not work correctly. For example, PEBS does not work because perf_event_attr::precise_ip is not passed to the syscall. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Frederic Weisbecker 提交于
It seems that some gcc versions build by default with frame pointers and some others omit them. Just build the tools with frame pointers as the callchains can be an important part of the perf workflow. Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1294325513-14276-3-git-send-email-fweisbec@gmail.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Han Pingtian 提交于
I found when specifying all tracepoints with -e to one of subcommand, such as 'stat', the program will trigger a buffer overflow error, like this: *** buffer overflow detected ***: ./perf terminated ======= Backtrace: ========= /lib64/libc.so.6(__fortify_fail+0x37)[0x382cefb2c7] .... The tracepoints are separated by comma, something like this: $ perf stat -a -e `perf list |grep Tracepoint|awk -F'[' '{gsub(/[[:space:]]+/,"",$1);array[FNR]=$1}END{outputs=array[1];for (i=2;i<=FNR;i++){ outputs=outputs "," array[i];};print outputs}'` The root reason of this problem is that store_event_type() is called for all events, and will overflow the 'filename' at: strncat(filename, orgname, strlen(orgname)); This patch fixes it by calling store_event_type() only when the event name has been found. LKML-Reference: <20110106093922.GB6713@hpt.nay.redhat.com> Signed-off-by: NHan Pingtian <phan@redhat.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 06 1月, 2011 7 次提交
-
-
由 Jean Pihet 提交于
Provides documentation for the following: - the new power trace API, - the old (legacy) power trace API, - the DEPRECATED Kconfig option usage. Signed-off-by: NJean Pihet <j-pihet@ti.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: trenn@suse.de Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: linux-pm@lists.linux-foundation.org LKML-Reference: <1294253342-29056-3-git-send-email-j-pihet@ti.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jean Pihet 提交于
Uses the machine_suspend trace point, called from the generic kernel suspend_devices_and_enter function. Signed-off-by: NJean Pihet <j-pihet@ti.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Arjan van de Ven <arjan@linux.intel.com> CC: Thomas Renninger <trenn@suse.de> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linux-pm@lists.linux-foundation.org LKML-Reference: <1294253342-29056-2-git-send-email-j-pihet@ti.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
Not accessed outside builtin-script, so make them static. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
That already does what was being done here. The warning is now unconditionally given by __perf_session__process_pipe_events, just like for non pipe processing. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Just like we do at __perf_session__process_events Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephane Eranian 提交于
This patch fixes the usage of the perf_event.h header file between command modules and the supporting code in util. It is necessary to ensure that ALL files use the SAME perf_event.h header from the kernel source tree. There were a couple of #include <linux/perf_event.h> mixed with #include "../../perf_event.h". This caused issues on some distros because of mismatch in the layout of struct perf_event_attr. That eventually led perf stat to segfault. Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@gmail.com> LKML-Reference: <4d233cf0.2308e30a.7b00.ffffc187@mx.google.com> Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Rebooted my devel machine, first thing I ran was perf test, that expects debugfs to be mounted, test fails. Be more clear about it. Also add missing newlines and add more informative message when sys_perf_event_open fails. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 05 1月, 2011 8 次提交
-
-
由 Huang Ying 提交于
Prevent the long delay in io_check_error making NMI watchdog timeout. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NDon Zickus <dzickus@redhat.com> LKML-Reference: <1294198689-15447-3-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Dongdong Deng 提交于
The spin_lock_debug/rcu_cpu_stall detector uses trigger_all_cpu_backtrace() to dump cpu backtrace. Therefore it is possible that trigger_all_cpu_backtrace() could be called at the same time on different CPUs, which triggers and 'unknown reason NMI' warning. The following case illustrates the problem: CPU1 CPU2 ... CPU N trigger_all_cpu_backtrace() set "backtrace_mask" to cpu mask | generate NMI interrupts generate NMI interrupts ... \ | / \ | / The "backtrace_mask" will be cleaned by the first NMI interrupt at nmi_watchdog_tick(), then the following NMI interrupts generated by other cpus's arch_trigger_all_cpu_backtrace() will be taken as unknown reason NMI interrupts. This patch uses a test_and_set to avoid the problem, and stop the arch_trigger_all_cpu_backtrace() from calling to avoid dumping a double cpu backtrace info when there is already a trigger_all_cpu_backtrace() in progress. Signed-off-by: NDongdong Deng <dongdong.deng@windriver.com> Reviewed-by: NBruce Ashfield <bruce.ashfield@windriver.com> Cc: fweisbec@gmail.com LKML-Reference: <1294198689-15447-2-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NDon Zickus <dzickus@redhat.com>
-
由 Don Zickus 提交于
There are some paths that walk the die_chain with preemption on. Make sure we are in an NMI call before we start doing anything. This was triggered by do_general_protection calling notify_die with DIE_GPF. Reported-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NDon Zickus <dzickus@redhat.com> LKML-Reference: <1294198689-15447-1-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge reason: Add the final .37 tree. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ipv4/route.c: respect prefsrc for local routes bridge: stp: ensure mac header is set bridge: fix br_multicast_ipv6_rcv for paged skbs atl1: fix oops when changing tx/rx ring params drivers/atm/atmtcp.c: add missing atm_dev_put starfire: Fix dma_addr_t size test for MIPS tg3: fix return value check in tg3_read_vpd() Broadcom CNIC core network driver: fix mem leak on allocation failures in cnic_alloc_uio_rings() ISDN, Gigaset: Fix memory leak in do_disconnect_req() CAN: Use inode instead of kernel address for /proc file skfp: testing the wrong variable in skfp_driver_init() ppp: allow disabling multilink protocol ID compression ehea: Avoid changing vlan flags ueagle-atm: fix PHY signal initialization race
-
由 Joel Sing 提交于
The preferred source address is currently ignored for local routes, which results in all local connections having a src address that is the same as the local dst address. Fix this by respecting the preferred source address when it is provided for local routes. This bug can be demonstrated as follows: # ifconfig dummy0 192.168.0.1 # ip route show table local | grep local.*dummy0 local 192.168.0.1 dev dummy0 proto kernel scope host src 192.168.0.1 # ip route change table local local 192.168.0.1 dev dummy0 \ proto kernel scope host src 127.0.0.1 # ip route show table local | grep local.*dummy0 local 192.168.0.1 dev dummy0 proto kernel scope host src 127.0.0.1 We now establish a local connection and verify the source IP address selection: # nc -l 192.168.0.1 3128 & # nc 192.168.0.1 3128 & # netstat -ant | grep 192.168.0.1:3128.*EST tcp 0 0 192.168.0.1:3128 192.168.0.1:33228 ESTABLISHED tcp 0 0 192.168.0.1:33228 192.168.0.1:3128 ESTABLISHED Signed-off-by: NJoel Sing <jsing@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Hellwig 提交于
The ->trim_fs has been removed meanwhile, so remove it from the documentation as well. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 1月, 2011 10 次提交
-
-
由 Thomas Renninger 提交于
builtin-timechart must only pass -e power:xy events if they are supported by the running kernel, otherwise try to fetch the old power:power{start,end} events. For this I added the tiny helper function: int is_valid_tracepoint(const char *event_string) to parse-events.[hc], which could be more generic as an interface and support hardware/software/... events, not only tracepoints, but someone else could extend that if needed... Signed-off-by: NThomas Renninger <trenn@suse.de> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NJean Pihet <j-pihet@ti.com> LKML-Reference: <1294073445-14812-4-git-send-email-trenn@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Renninger 提交于
Add these new power trace events: power:cpu_idle power:cpu_frequency power:machine_suspend The old C-state/idle accounting events: power:power_start power:power_end Have now a replacement (but we are still keeping the old tracepoints for compatibility): power:cpu_idle and power:power_frequency is replaced with: power:cpu_frequency power:machine_suspend is newly introduced. Jean Pihet has a patch integrated into the generic layer (kernel/power/suspend.c) which will make use of it. the type= field got removed from both, it was never used and the type is differed by the event type itself. perf timechart userspace tool gets adjusted in a separate patch. Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NJean Pihet <jean.pihet@newoldbits.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: rjw@sisk.pl LKML-Reference: <1294073445-14812-3-git-send-email-trenn@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
-
由 Thomas Renninger 提交于
power_frequency moved to drivers/cpufreq/cpufreq.c which has to be compiled in, no need to export it. intel_idle can a be module though... Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NJean Pihet <jean.pihet@newoldbits.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: rjw@sisk.pl LKML-Reference: <1294073445-14812-2-git-send-email-trenn@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
-
由 Ingo Molnar 提交于
Merge branch 'perf/test' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core
-
由 Ingo Molnar 提交于
Merge reason: pick up latest -rc. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
To test the use of the perf_evsel class on something other than the tools from where we refactored code to create it. It calls open() N times and then checks if the event created to monitor it returns N events. [acme@felicio linux]$ perf test 1: vmlinux symtab matches kallsyms: Ok 2: detect open syscall event: Ok [acme@felicio linux]$ It does. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Han Pingtian <phan@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
While writing the first user of the routines created from the ad-hoc routines in the existing builtins I noticed that the resulting set of calls was too long, reduce it by doing some best effort allocations. Tools that need to operate on multiple threads and cpus should pre-allocate enough resources by explicitely calling the perf_evsel__alloc_{fd,counters} methods. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
So that later, we can pass the thread_map instance instead of (thread_num, thread_map) for things like perf_evsel__open and friends, just like was done with cpu_map. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
So that later, we can pass the cpu_map instance instead of (nr_cpus, cpu_map) for things like perf_evsel__open and friends. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-