- 05 4月, 2012 1 次提交
-
-
由 Joe Perches 提交于
Convert the macro to inline function to check the arguments. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 12月, 2011 1 次提交
-
-
由 Jiri Pirko 提交于
Let caller know the result of adding/removing vlan id to/from vlan filter. In some drivers I make those functions to just return 0. But in those where there is able to see if hw setup went correctly, return value is set appropriately. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2011 1 次提交
-
-
由 Michał Mirosław 提交于
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
The device.h header was including module.h, making it present for most of these drivers. But we want to clean that up. Call out the include of module.h in the modular network drivers. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 19 10月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 10月, 2011 1 次提交
-
-
由 Ian Campbell 提交于
[ Use DMA_TO_DEVICE and dma_mapping_error() -DaveM ] Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 9月, 2011 1 次提交
-
-
由 stephen hemminger 提交于
All tables of function pointers should be const. The pre-existing code has lots of needless indirection... Inspired by similar change in PAX. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 8月, 2011 1 次提交
-
-
由 Jiri Pirko 提交于
replace it by ndo_set_rx_mode Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
Move the Exar drivers into drivers/net/ethernet/neterion/ and make the necessary Kconfig and Makefile changes. CC: Jon Mason <jdmason@kudzu.us> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 22 7月, 2011 1 次提交
-
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill vdev->vlgrp and vxge_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 7月, 2011 1 次提交
-
-
由 Tobias Klauser 提交于
Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 6月, 2011 2 次提交
-
-
由 Paul Gortmaker 提交于
There are enough instances of this: iph->frag_off & htons(IP_MF | IP_OFFSET) that a helper function is probably warranted. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Need to add stat_sync wrapper around 64 bit statistic values. Fix wraparound bug in lockup detector where it is unsafely comparing 64 bit value that is not atomic. Since only care about detecting activity just looking at current low order bits will work. Remove unused entries in old vxge_sw_stats structure. Change the error counters to unsigned long since they won't grow so large as to have to be 64 bits. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 6月, 2011 1 次提交
-
-
由 Alexey Dobriyan 提交于
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 5月, 2011 2 次提交
-
-
由 Paul Gortmaker 提交于
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: NPaul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Gortmaker 提交于
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: NPaul <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 4月, 2011 1 次提交
-
-
由 Michał Mirosław 提交于
Side effect: ->gro_enable is removed as napi_gro_receive() does the fallback itself. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2011 1 次提交
-
-
由 Jon Mason 提交于
Hardware time stamp calculation can only be enabled by the privileged function. Enable it always by default and simply use the ethtool interface to set a flag to indicate whether or not the respective function driver should indicate the timestamp along with the received packet. Also, make certain fields in vxge_hw_device_config bit-fields to reduce the size of the struct. Signed-off-by: NJon Mason <jdmason@kudzu.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 01 3月, 2011 1 次提交
-
-
由 Sergei Shtylyov 提交于
Several more network drivers that read the device's revision ID from the PCI configuration register were merged after the commit 44c10138 (PCI: Change all drivers to use pci_device->revision), so it's time to do another pass of conversion to using the 'revision' field of 'struct pci_dev'... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: N"John W. Linville" <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 1月, 2011 3 次提交
-
-
由 Jon Mason 提交于
To reduce the possibility of losing an interrupt in the handler due to a race between an interrupt processing and disable/enable of interrupts, enable MSIX one shot. Also, add support for adaptive interrupt coalesing Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NMasroor Vettuparambil <masroor.vettuparambil@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
The firmware PXE EPROM version detection is failing due to passing the wrong parameter into firmware query function. Also, the version printing function has an extraneous newline. Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NSivakumar Subramani <sivakumar.subramani@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Reorder the commands to be in the inverse order of their allocations (instead of the random order they appear to be in), propagate return code on errors from pci_request_region and register_netdev, reduce the config_dev_cnt and total_dev_cnt counters on remove, and return the correct error code for vdev->vpaths kzalloc failures. Also, prevent leaking of vdev->vpaths memory and netdev in vxge_probe error path due to freeing for these not occurring in vxge_device_unregister. Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NSivakumar Subramani <sivakumar.subramani@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2011 1 次提交
-
-
由 Jesper Juhl 提交于
Regardless of whether the firmware update being performed by vxge_fw_upgrade() is a success or not we must still remember to always release_firmware() before returning. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Acked-by: NRam Vepa <ram.vepa@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 12月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
Commit 6e07ebd8 (drivers/net: remove unnecessary flush_scheduled_work() calls) incorrectly removed the flush call without replacing it with the appropriate work specific operation. Fix it by flushing vdev->reset_task explicitly. Pointed out by Jon Mason. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Jon Mason <jon.mason@exar.com> Acked-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
janz-ican3, sh_eth, skge and vxge don't use workqueue at all and there is no reason to flush the system_wq. Drop flush_scheduled_work() calls and references to workqueue. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Sivakumar Subramani <sivakumar.subramani@exar.com> Cc: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Cc: Jon Mason <jon.mason@exar.com> Cc: netdev@vger.kernel.org
-
- 11 12月, 2010 5 次提交
-
-
由 Jon Mason 提交于
When hot-unplugging a vxge adapter while running, the driver's remove routine prints warning and then stalls the calling thread. This is due to vxge_remove calling vxge_device_unregister to unregister the netdev before calling flush_scheduled_work clear any pending work. Swapping the order of these two functions resolves the issue. Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NRam Vepa <ram.vepa@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Use a workqueue to handle the device reset during a transmit timeout, as there can be a deadlock during bringup. Also, set the netif carrier off before the watchdog reset is started to prevent the timeout from reoccurring while still processing the first. Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NRam Vepa <ram.vepa@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Only BAR0 is ever accessed, thus making the calls to pci_request_regions overkill. Change calls of pci_request_regions to pci_request_region to reduce the size of the mapped area. Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NRam Vepa <ram.vepa@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Calling pci_disable_sriov when unloading a SR-IOV physical function driver from a host when a guest is using a virtual function from that device can cause a host crash or VM crash. The crash is caused by the virtual config space no longer being present when PF is removed (due to the pci_disable_sriov). This can be avoided by not calling pci_disable_sriov to disable the PCI space when shutting down the PF. Each function in the X3100 operates independently and in this case will operate properly in the absence of the PF. Also, added improved logic in the detection of SR-IOV initialization. Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NRam Vepa <ram.vepa@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Move function locations to remove the need for internal declarations and other misc clean-ups. Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NArpit Patel <arpit.patel@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2010 1 次提交
-
-
由 Michał Mirosław 提交于
NETIF_F_HW_CSUM is a superset of NETIF_F_IP_CSUM+NETIF_F_IPV6_CSUM, but some drivers miss the difference. Fix this and also fix UFO dependency on checksumming offload as it makes the same mistake in assumptions. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 12月, 2010 2 次提交
-
-
由 Jon Mason 提交于
Use strncpy instead of memcpy when working on strings Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Remove printks for ring blocks, fifo blocks, and rx doorbell mode as they clutter the dmesg output during modprobe and provide no useful information. Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 11月, 2010 1 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 11月, 2010 2 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 11月, 2010 3 次提交
-
-
由 Jon Mason 提交于
Correct issues found by running sparse on the vxge driver, as well as other miscellaneous cleanups. Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Detect if the adapter is Titan or Titan1A, and tune the driver for this hardware. Also, remove unnecessary function __vxge_hw_device_id_get. Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NRam Vepa <ram.vepa@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Add support for enable/disabling hardware timestamping on receive packets via ioctl call. When enabled, the hardware timestamp replaces the FCS in the payload. Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NRam Vepa <ram.vepa@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-