If the SQ and RQ of the QP in error state uses separate CQs, traverse
the list of QPs using each CQs and invoke the buddy CQ handler for
both SQ and RQ.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Remove support for RDMA-READ-WITH-INVALIDATE from ocrdma driver.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

1. Cleanup sequence in ocrdma_remove(). The device should be
   unregistered from IB stack before any device specific cleanup.
2. Always return success in the resource destroy path. In case destroy
   command returns error, IB stack will trigger cleanup again while
   closing the uverbs device causing kernel panic BUG_ON().
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix ocrdma_query_qp to refelect correct qp state based on FW.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

1. Add statistics counters for error cqes.
2. Add file ("reset_stats") to reset rdma stats in Debugfs.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix ocrdma_register_device to initialize correct number of interrupt
vectors in device pointer.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Move PD allocation and deallocation from firmware to driver.  At
driver load time all the PDs will be requested from firmware and their
management will be handled by driver to reduce mailbox commands
overhead at runtime.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Increase the GID table size from 8 to 16 enteries.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add the following per-port sysfs traffic counters for RoCE:

        port_xmit_packets
        port_rcv_packets
        port_rcv_data
        port_xmit_data
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

In order to allow umems that do not pin memory, we need the umem to
keep track of its region's address.

This makes the offset field redundant, and so this patch removes it.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

For user applications that use UD QPs, always resolve destination MAC
from the GRH.  This is to avoid failure due to any garbage value in
the attr->dmac.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Parenthesis around constants serves no purpose, save the bits!
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

No need to re-invent the wheel here
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Get rid of obfuscating ocrdma_alloc_mqe() kzalloc() wrapper as all it
did was to make it less visible that the structure was already cleared
on allocation.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If IPV6 is disabled, we get the warning:

    drivers/infiniband/hw/ocrdma/ocrdma_main.c:650:1: warning: label ‘err_notifier6’ defined but not used [-Wunused-label]
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

In some platforms, when iommu is enabled, the bus address returned by
dma_alloc_coherent is different than the physical address.  ocrdma
should use physical address for mmap-ing the queue memory for the
applications.

This patch adds the use of virt_to_phys() at all such places where
kernel buffer is mapped to user process context.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

After IP-based GID changes, VLAN id can be obtained from
qp_attr->vlan_id.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

ocrdma_query_ah() does not use correct macro, and checks the wrong bit
for the validity of address handle in vector table.  Fix this.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Because of IP-based GIDs, userspace AHs must have MAC and VLAN ID
resolved separately.  Presently, user AHs are broken for ocrdma.  This
patch resolves L2 addresses while creating user AH and obtains the
right DMAC and VLAN ID before creating AH.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When ib_request_notify_cq() is called for the first time, ocrdma tries
to skip setting deffered_arm flag. This may lead CQ to an un-armed
state thus never generating a CQ event and leaving consumer hung.

This patch removes the part of code that skips setting deferred_arm.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix ocrdma_query_device() to report correct value of max_fast_reg_page_list_len.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch fix spelling typo in printk.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Ocrdma does not report hw_ver when query_device is issued.  This patch
adds a meaningful value to this field.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Update the sli specific mailbox command request/response data
sturcures to fix endianness issues.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Currently, driver obtains service level value from ah_attr->sl field.
However, this field is set to zero all the times from rdma-cm.  This
patch allows create_ah to obtain service level from dev->sl.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix the warning about the usage of plain integer as NULL pointer.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Current GID table gets updated only at the time of inet notification.
Fix this by initializing the table at the time of device registration.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

HW can support 16K STAG entries.  Change this max limit.  Also, move
this array out of ocrdma_dev to reduce the size of this structure.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix the Statistics command opcode. Also specify the opcode of each
command for better readablilty.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Update the max_mr_size with proper value. Corrected the response
structure of query config mailbox command.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.Com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If any mailbox command reports timeout, save the state in the driver,
to prevent issuing any more commands to the HW.  Do proper cleanup
even if FW is in error state.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.Com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Prevent posting opcodes other than send and send immediate on the UD QPs.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.Com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

During cable pull test with a mount over NFS/RDMA, the driver was
reporting error completions when there were no pending requests in the
SQ and RQ.  This was triggering a host crash because of reporting
wrong work req id.  Avoid this crash by adding a check for SQ and RQ
empty condition and prevent reporting completions if queues are empty.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Cleanup the AH table in error path, if HW initialization fails
after AH table creation.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Removing hardcoded value of max dpp qps and calculate the same from
doorbell page size and WQE size.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

be2net driver sends a shutdown event to ocrdma during shutdown/reboot.
As part of event processing, ocrdma calls close() and remove() to free
all the resources associated with ocrdma. This also frees irqs used by
ocrdma.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add a new entry under sysfs for getting the HW type.
Add a new-line character for the FW version string
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>