This *should* be safe these days.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

echo ac:id >> pstate # select mode when on mains power
echo dc:id >> pstate # select mode when on battery
echo id >> pstate # select mode for both
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

v2:
- s/init/fini/ typo, reported by Alex
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

As a side note.. It's a bit hard to figure out how to name this commit..
GK20A is NVEA, which is before NV108 (GK208).. Confusing.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This removes the previous hack that worked on some boards.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

As documented at:

ftp://download.nvidia.com/open-gpu-doc/gk104-disable-graphics-power-gating/1/gk104-disable-graphics-power-gating.txt

NVIDIA were not able document the steps necessary to detect whether this
is required or not at this time.  However, they did confirm that this
procedure is safe to perform unconditionally on GK104/6.  GK107 does not
have the power gating feature, and it was recommended that we do not
perform these steps there as the effects were not verified.

The disable path is from observing the binary driver, and not
documented in the link above.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The final parameter to ttm_bo_reserve() is a pointer, therefore callers
should use NULL instead of 0.

Fixes a bunch of sparse warnings of this type:

	warning: Using plain integer as NULL pointer
Signed-off-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NMartin Peres <martin.peres@free.fr>
Tested-by: NStefan Ringel <mail@stefanringel.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The display in fdo#76483 pulses the hotplug line for link retraining
after we cut power to the main link on the source, even while it's
in D3.

fdo#76483
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Under some complicated circumstances (boot, suspend, resume, attach
second display, suspend, resume, suspend, detach second display,
resume, suspend, attach second display, resume), the fb_set_suspend()
call can somehow result in a modeset being attempted before we're
ready for it and things blow up in fun ways.

Running display init first fixes the issue.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

There's Apple machines out there which (probably completely arbitrarily)
restrict each output path to a particular head.  This causes us to not
be able to locate the output data needed to power on/off the DP output
correctly.

We fix this by passing in a head index we know is valid (as opposed to
"head 0").
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

When gcc 4.8 inlines this function, it eats up 16 bytes on the stack
every time. Eventually we hit warnings because our stack grew too
much:

ramnve0.c:1383:1: error: the frame size of 1496 bytes is larger than
1024 bytes

We fix this by preventing inlining for this function.
Signed-off-by: NStéphane Marchesin <marcheu@chromium.org>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

To implement hotplug detection in a race-free manner, drivers must call
drm_kms_helper_poll_init() before hotplug events can be triggered. Such
events can be triggered right after any of the encoders or connectors
are initialized. At the same time, if the drm_fb_helper_hotplug_event()
helper is used by a driver, then the poll helper requires some parts of
the FB helper to be initialized to prevent a crash.

At the same time, drm_fb_helper_init() requires information that is not
necessarily available at such an early stage (number of CRTCs and
connectors), so it cannot be used yet.

Add a new helper, drm_fb_helper_prepare(), that initializes the bare
minimum needed to allow drm_kms_helper_poll_init() to execute and any
subsequent hotplug events to be processed properly.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

There's no need for this to be modifiable. Make it const so that it can
be put into the .rodata section.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

bo->mem.placement is not initialized when ttm_bo_man_get_node is called,
so the flag had no effect at all.

v2: change nouveau and vmwgfx as well
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Introduce generic functions to register and unregister connectors. This
provides a common place to add and remove associated user space
interfaces.
Signed-off-by: NThomas Wood <thomas.wood@intel.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If init doesn't run then disp->outp might not be initialized, resulting
in an oops.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reported-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

I don't know of anything this fixes, but it seems wrong anyway.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Need to drm_vblank_get/put() the crtc involved in a
pending pageflip, or we might not get vblank irqs and
updates of vblank counts and timestamps for pageflip
events and flip completion.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The blob does not seem to write at that place for my NVAC, though it
does for my NV96, agreeing with what is done in the if/else structure
below. I guess someone forgot to remove the line when the if/else was
put in place.
Signed-off-by: NPierre Moreau <pierre.morrow@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The specified stride was not correct, resulting in erases overlapping
and part of the zcull regions being not erased at all.
Signed-off-by: NPierre Moreau <pierre.morrow@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes (at least) PTHERM accesses timing out at higher clock speeds.

Values and registers taken from what the binary driver does.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We were sending the necessary state changes to unset the mode, but
never actually hit the big GO button unless another modeset happens
afterwards.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>