Add reserve_memtype and free_memtype wrapper for pci_mmap_page_range. Free
is called on unmap, but identity map continues to be mapped as per
pci_mmap_page_range request, until next request for the same region calls
ioremap_change_attr(), which will go through without conflict. This way of
mapping is identical to one used in ioremap/iounmap.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use reserve_memtype and free_memtype interfaces in set_memory_uc/set_memory_wb
interfaces to avoid aliasing.
Usage model of set_memory_uc and set_memory_wb is for RAM memory and users
will first call set_memory_uc and call set_memory_wb after use to reset the
attribute.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use reserve_memtype and free_memtype interfaces in ioremap/iounmap to avoid
aliasing.

If there is an existing alias for the region, inherit the memory type from
the alias. If there are conflicting aliases for the entire region, then fail
ioremap.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make ioremap_change_attr() non-static and use prot_val in place of ioremap_mode.
This interface is used in subsequent PAT patches.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Sets up pat_init() infrastructure.

PAT MSR has following setting.
	PAT
	|PCD
	||PWT
	|||
	000 WB		_PAGE_CACHE_WB
	001 WC		_PAGE_CACHE_WC
	010 UC-		_PAGE_CACHE_UC_MINUS
	011 UC		_PAGE_CACHE_UC

We are effectively changing WT from boot time setting to WC.
UC_MINUS is used to provide backward compatibility to existing /dev/mem
users(X).

reserve_memtype and free_memtype are new interfaces for maintaining alias-free
mapping. It is currently implemented in a simple way with a linked list and
not optimized. reserve and free tracks the effective memory type, as a result
of PAT and MTRR setting rather than what is actually requested in PAT.

pat_init piggy backs on mtrr_init as the rules for setting both pat and mtrr
are same.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Documentation about PAT related interfaces, intended usage and memory attribute
relationship.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Initializing to zero is generally bad idea, I hope it is right for
__init data, too.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

don't need to allocate that one by one
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

do simple memtest after init_memory_mapping

use find_e820_area_size to find all ram range that is not reserved.

and do some simple bits test to find some bad ram.

if find some bad ram, use reserve_early to exclude that range.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch replaces numeric constant with an appropriate macro

Also 0x800000000000UL is changed to bit shifting which is complement
to the code comment (thanks hpa for notice)
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

After an experimental cleanup of <linux/percpu.h>, these files were
exposed as invoking kmalloc() without including <linux/slab.h>.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There really is no need for a redundant implementation here, just keep
the alternative name for allowing consumers to use consistent naming.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

I was trying to get the address of instruction to be executed
next after the kprobed instruction.  But regs->eip in post_handler()
contains value which is useless to the user. It's pre-corrected value.
This value is difficult to use without access to resume_execution(), which
is not exported anyway.
I moved the invocation of post_handler() to *after* resume_execution().
Now regs->eip contains meaningful value in post_handler().

I do not think this change breaks any backward-compatibility.
To make meaning of the old value, post_handler() would need access to
resume_execution() which is not exported.  I have difficulty to believe
that previous, uncorrected, regs->eip can be meaningfully used in
post_handler().
Signed-off-by: NYakov Lerner <iler.ml@gmail.com>
Acked-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use force_sig in handle_vm86_trap like other machine traps do.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The PT_DTRACE flag is meaningless and obsolete.
Don't touch it.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The previous "x86_64 ia32 ptrace vs -ENOSYS" fix only covered
the int $0x80 system call entries.  This does the same fix
for the sysenter and syscall instruction paths.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we're stopped at syscall entry tracing, ptrace can change the %rax
value from -ENOSYS to something else.  If no system call is actually made
because the syscall number (now in orig_rax) is bad, then we now always
reset %rax to -ENOSYS again.

This changes it to leave the return value alone after entry tracing.
That way, the %rax value set by ptrace is there to be seen in user mode
(or in syscall exit tracing).  This is consistent with what the 32-bit
kernel does.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we're stopped at syscall entry tracing, ptrace can change the %eax
value from -ENOSYS to something else.  If no system call is actually made
because the syscall number (now in orig_eax) is bad, then the %eax value
set by ptrace should be returned to the user.  But, instead it gets reset
to -ENOSYS again.  This is a regression from the native 32-bit kernel.

This change fixes it by leaving the return value alone after entry tracing.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch removes the write-only timer_uses_ioapic_pin_0
(gsi can't be <= 15 in the line of it's fake usage in mpparse_32.c).

Spotted by the GNU C compiler.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

code got a bit smaller:

arch/x86/kernel/vsmp_64.o:

   text	   data	    bss	    dec	    hex	filename
    205	      4	      0	    209	     d1	vsmp_64.o.before
    181	      4	      0	    185	     b9	vsmp_64.o.after
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Indicate TSCs are unreliable as time sources if the platform is
a multi chassi ScaleMP vSMPowered machine.
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Re-arrange set_vsmp_pv_ops so that pv_ops are set only if
the platform has capability to support paravirtualized irq ops
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- Fix the the build breakage when PARAVIRT is defined
  but PCI is not
  This fixes problem reported at:
	http://marc.info/?l=linux-kernel&m=120525966600698&w=2
- Make is_vsmp_box() available even when PARAVIRT is not defined.
  This is needed to determine if tsc's are reliable as a time source
  even when PARAVIRT is not defined.
- split vsmp_init to use is_vsmp_box() and set_vsmp_pv_ops()
  set_vsmp_pv_ops will do nothing if PCI is not enabled in the config.
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

is_vsmp_box() currently does not work on vSMPowered systems,  as pci cfg
space is not read correctly -- This patch fixes it.
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove the last leftovers from the files. Move the ones
that are still used to the files they belong, the others
that grep can't reach, simply throw away.

Merge comments ontop of file and that's it: smpboot integrated
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

They are i386 specific (the x86_64 definitions live
elsewhere, and should remain there), so are enclosed around
an ifdef
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

this is the last remaining function in smpboot_32.c
Since it is i386 specific, move it around an ifdef to
smpboot.c
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

With the previous changes, code for native_smp_prepare_cpus()
in i386 and x86_64 now look very similar. merge them into
smpboot.c. Minor differences are inside ifdef
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

x86_64 has two nr_ioapics = 0 statements. In 32-bit, it can be done
too. We do it through the smpboot_clear_io_apic() inline function,
to cope with subarchitectures (visws) that does not compile mpparse in
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>