- 01 6月, 2011 7 次提交
-
-
由 Todd Poynor 提交于
!dev case needs iounmap before return. Signed-off-by: NTodd Poynor <toddpoynor@google.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Colin Cross 提交于
OMAP4 contains two separate instances of the padconf registers, one in the core system config and one in the wakeup system config. Pass in two tables to apply the correct values to each instance. Signed-off-by: NColin Cross <ccross@android.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Colin Cross 提交于
OMAP4 has two mux instances, and the board may not have settings for one of them. Allow the board file to pass NULL for an instance's mux settings, which will initialize the mux instance but skip writing board settings. Signed-off-by: NColin Cross <ccross@android.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Rabin Vincent 提交于
Don't PTR_ERR() a non-error pointer: initcall omap4_l3_init+0x0/0xdc returned -544980480 after 0 usecs initcall omap4_l3_init+0x0/0xdc returned with error code -544980480 Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Omar Ramirez Luna 提交于
Commit d038aee2 "omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag", changes iovmm to receive flags specified by user, however the upper 16 bits of the flags are wiped by iovmm itself. This fixes IOVMF_DA_FIXED flags from being lost, and lets the user map its desired "device addresses". Signed-off-by: NOmar Ramirez Luna <omar.ramirez@ti.com> Acked-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Julia Lawall 提交于
Platform_device_del should be called before platform_device_put, as platform_device_put can delete the structure. Additionally, improve the error handling code for the call to ioremap, so that it calls platform_device_put. The semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2; @@ *platform_device_put(e1); ... when != e1 = e2 *platform_device_del(e1); // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Govindraj.R 提交于
Fix below compilation warnings. arch/arm/mach-omap2/omap_hwmod.c: In function 'omap_hwmod_for_each': arch/arm/mach-omap2/omap_hwmod.c:1631: warning: 'ret' may be used uninitialized in this function arch/arm/mach-omap2/mux.c: In function 'omap_mux_get_gpio': arch/arm/mach-omap2/mux.c:917: warning: 'm' may be used uninitialized in this function Signed-off-by: NGovindraj.R <govindraj.raja@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 31 5月, 2011 5 次提交
-
-
由 Santosh Shilimkar 提交于
Fix below build warning. CC arch/arm/plat-omap/sram.o arch/arm/plat-omap/sram.c: In function 'omap_map_sram': arch/arm/plat-omap/sram.c:224: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'unsigned int' While at this, convert SRAM printk(* "") to pr_*(""). Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Igor Grinberg 提交于
WARNING: arch/arm/mach-omap2/built-in.o(.text+0x11014): Section mismatch in reference from the function cm_t3517_init_usbh() to the (unknown reference) .init.data:(unknown) The function cm_t3517_init_usbh() references the (unknown reference) __initdata (unknown). This is often because cm_t3517_init_usbh lacks a __initdata annotation or the annotation of (unknown) is wrong. Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Santosh Shilimkar 提交于
The serial*_data should have been marked as __initdata as per it's usage in the board files. Fix the same to remove the section mismatch warnings caused by it. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NSilesh C V <silesh@ti.com> [tony@atomide.com: updated with additional fixes from Silesh] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Axel Lin 提交于
I got some build error like below while executing "make omap2plus_defconfig". CC arch/arm/mach-omap2/board-2430sdp.o arch/arm/mach-omap2/board-2430sdp.c: In function 'omap_2430sdp_init': arch/arm/mach-omap2/board-2430sdp.c:247: error: 'GPIOF_OUT_INIT_LOW' undeclared (first use in this function) arch/arm/mach-omap2/board-2430sdp.c:247: error: (Each undeclared identifier is reported only once arch/arm/mach-omap2/board-2430sdp.c:247: error: for each function it appears in.) This patch fixes the build error by include linux/gpio.h instead of mach/gpio.h. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Cc: Syed Mohammed Khasim <x0khasim@ti.com> Cc: Grazvydas Ignotas <notasas@gmail.com> Cc: Steve Sakoman <steve@sakoman.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Janusz Krzysztofik 提交于
Forward-declare platform_device structure in arch/arm/plat-omap/include/plat/flash.h, otherwise compilation may break with: In file included from arch/arm/mach-omap1/flash.c:15: arch/arm/plat-omap/include/plat/flash.h:14: warning: 'struct platform_device' declared inside parameter list arch/arm/plat-omap/include/plat/flash.h:14: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/mach-omap1/flash.c:16: warning: 'struct platform_device' declared inside parameter list arch/arm/mach-omap1/flash.c:17: error: conflicting types for 'omap1_set_vpp' arch/arm/plat-omap/include/plat/flash.h:14: error: previous declaration of 'omap1_set_vpp' was here Detected and corrected while building for Amstrad Delta, confirmed with omap1_defconfig. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 30 5月, 2011 28 次提交
-
-
由 Linus Torvalds 提交于
.. except there are various scripts that really know that there are three numbers, so it calls itself "3.0.0-rc1". Hopefully by the time the final 3.0 is out, we'll have that extra zero all figured out. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Remove ecryptfs_header_cache_2 eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose() eCryptfs: Return useful code from contains_ecryptfs_marker eCryptfs: Fix new inode race condition eCryptfs: Cleanup inode initialization code eCryptfs: Consolidate inode functions into inode.c
-
git://git.open-osd.org/linux-open-osd由 Linus Torvalds 提交于
* 'pnfs-submit' of git://git.open-osd.org/linux-open-osd: (32 commits) pnfs-obj: pg_test check for max_io_size NFSv4.1: define nfs_generic_pg_test NFSv4.1: use pnfs_generic_pg_test directly by layout driver NFSv4.1: change pg_test return type to bool NFSv4.1: unify pnfs_pageio_init functions pnfs-obj: objlayout_encode_layoutcommit implementation pnfs: encode_layoutcommit pnfs-obj: report errors and .encode_layoutreturn Implementation. pnfs: encode_layoutreturn pnfs: layoutret_on_setattr pnfs: layoutreturn pnfs-obj: osd raid engine read/write implementation pnfs: support for non-rpc layout drivers pnfs-obj: define per-inode private structure pnfs: alloc and free layout_hdr layoutdriver methods pnfs-obj: objio_osd device information retrieval and caching pnfs-obj: decode layout, alloc/free lseg pnfs-obj: pnfs_osd XDR client implementation pnfs-obj: pnfs_osd XDR definitions pnfs-obj: objlayoutdriver module skeleton ...
-
由 Linus Torvalds 提交于
We had a few drivers move from arch/arm into drivers/gpio, but they don't actually compile without the ARM platform headers etc. As a result they were messing up allyesconfig on x86. Make them depend on ARM. Reported-by: NIngo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tyler Hicks 提交于
Now that ecryptfs_lookup_interpose() is no longer using ecryptfs_header_cache_2 to read in metadata, the kmem_cache can be removed and the ecryptfs_header_cache_1 kmem_cache can be renamed to ecryptfs_header_cache. Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com>
-
由 Tyler Hicks 提交于
ecryptfs_lookup_interpose() has turned into spaghetti code over the years. This is an effort to clean it up. - Shorten overly descriptive variable names such as ecryptfs_dentry - Simplify gotos and error paths - Create helper function for reading plaintext i_size from metadata It also includes an optimization when reading i_size from the metadata. A complete page-sized kmem_cache_alloc() was being done to read in 16 bytes of metadata. The buffer for that is now statically declared. Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com>
-
由 Tyler Hicks 提交于
Instead of having the calling functions translate the true/false return code to either 0 or -EINVAL, have contains_ecryptfs_marker() return 0 or -EINVAL so that the calling functions can just reuse the return code. Also, rename the function to ecryptfs_validate_marker() to avoid callers mistakenly thinking that it returns true/false codes. Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com>
-
由 Tyler Hicks 提交于
Only unlock and d_add() new inodes after the plaintext inode size has been read from the lower filesystem. This fixes a race condition that was sometimes seen during a multi-job kernel build in an eCryptfs mount. https://bugzilla.kernel.org/show_bug.cgi?id=36002Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com> Reported-by: NDavid <david@unsolicited.net> Tested-by: NDavid <david@unsolicited.net>
-
由 Linus Torvalds 提交于
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (43 commits) acer-wmi: support integer return type from WMI methods msi-laptop: fix section mismatch in reference from the function load_scm_model_init acer-wmi: support to set communication device state by new wmid method acer-wmi: allow 64-bits return buffer from WMI methods acer-wmi: check the existence of internal 3G device when set capability platform/x86:delete two unused variables support wlan hotkey on Acer Travelmate 5735Z platform-x86: intel_mid_thermal: Fix memory leak platform/x86: Fix Makefile for intel_mid_powerbtn platform/x86: Simplify intel_mid_powerbtn acer-wmi: Delete out-of-date documentation acerhdf: Clean up includes acerhdf: Drop pointless dependency on THERMAL_HWMON acer-wmi: Update MAINTAINERS wmi: Orphan ACPI-WMI driver tc1100-wmi: Orphan driver acer-wmi: does not allow negative number set to initial device state platform/oaktrail: ACPI EC Extra driver for Oaktrail thinkpad_acpi: Convert printks to pr_<level> thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning ...
-
由 Linus Torvalds 提交于
Thomas Gleixner reports that we now have a boot crash triggered by CONFIG_CPUMASK_OFFSTACK=y: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c11ae035>] find_next_bit+0x55/0xb0 Call Trace: [<c11addda>] cpumask_any_but+0x2a/0x70 [<c102396b>] flush_tlb_mm+0x2b/0x80 [<c1022705>] pud_populate+0x35/0x50 [<c10227ba>] pgd_alloc+0x9a/0xf0 [<c103a3fc>] mm_init+0xec/0x120 [<c103a7a3>] mm_alloc+0x53/0xd0 which was introduced by commit de03c72c ("mm: convert mm->cpu_vm_cpumask into cpumask_var_t"), and is due to wrong ordering of mm_init() vs mm_init_cpumask Thomas wrote a patch to just fix the ordering of initialization, but I hate the new double allocation in the fork path, so I ended up instead doing some more radical surgery to clean it all up. Reported-by: NThomas Gleixner <tglx@linutronix.de> Reported-by: NIngo Molnar <mingo@elte.hu> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] mm: fix mmu_gather rework [S390] mm: fix storage key handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: more /proc and /sys file support
-
由 Matthew Garrett 提交于
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux: (22 commits) nfsd: make local functions static NFSD: Remove unused variable from nfsd4_decode_bind_conn_to_session() NFSD: Check status from nfsd4_map_bcts_dir() NFSD: Remove setting unused variable in nfsd_vfs_read() nfsd41: error out on repeated RECLAIM_COMPLETE nfsd41: compare request's opcnt with session's maxops at nfsd4_sequence nfsd v4.1 lOCKT clientid field must be ignored nfsd41: add flag checking for create_session nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctly nfsd4: fix wrongsec handling for PUTFH + op cases nfsd4: make fh_verify responsibility of nfsd_lookup_dentry caller nfsd4: introduce OPDESC helper nfsd4: allow fh_verify caller to skip pseudoflavor checks nfsd: distinguish functions of NFSD_MAY_* flags svcrpc: complete svsk processing on cb receive failure svcrpc: take advantage of tcp autotuning SUNRPC: Don't wait for full record to receive tcp data svcrpc: copy cb reply instead of pages svcrpc: close connection if client sends short packet svcrpc: note network-order types in svc_process_calldir ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm kcopyd: return client directly and not through a pointer dm kcopyd: reserve fewer pages dm io: use fixed initial mempool size dm kcopyd: alloc pages from the main page allocator dm kcopyd: add gfp parm to alloc_pl dm kcopyd: remove superfluous page allocation spinlock dm kcopyd: preallocate sub jobs to avoid deadlock dm kcopyd: avoid pointless job splitting dm mpath: do not fail paths after integrity errors dm table: reject devices without request fns dm table: allow targets to support discards internally
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'nfs-for-2.6.40' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: SUNRPC: Support for RPC over AF_LOCAL transports SUNRPC: Remove obsolete comment SUNRPC: Use AF_LOCAL for rpcbind upcalls SUNRPC: Clean up use of curly braces in switch cases NFS: Revert NFSROOT default mount options SUNRPC: Rename xs_encode_tcp_fragment_header() nfs,rcu: convert call_rcu(nfs_free_delegation_callback) to kfree_rcu() nfs41: Correct offset for LAYOUTCOMMIT NFS: nfs_update_inode: print current and new inode size in debug output NFSv4.1: Fix the handling of NFS4ERR_SEQ_MISORDERED errors NFSv4: Handle expired stateids when the lease is still valid SUNRPC: Deal with the lack of a SYN_SENT sk->sk_state_change callback...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: Squashfs: Fix sanity check patches on big-endian systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI EC: remove redundant code ACPI: Add D3 cold state ACPI: processor: fix processor_physically_present in UP kernel ACPI: Split out custom_method functionality into an own driver ACPI: Cleanup custom_method debug stuff ACPI EC: enable MSI workaround for Quanta laptops ACPICA: Update to version 20110413 ACPICA: Execute an orphan _REG method under the EC device ACPICA: Move ACPI_NUM_PREDEFINED_REGIONS to a more appropriate place ACPICA: Update internal address SpaceID for DataTable regions ACPICA: Add more methods eligible for NULL package element removal ACPICA: Split all internal Global Lock functions to new file - evglock ACPI: EC: add another DMI check for ASUS hardware ACPI EC: remove dead code ACPICA: Fix code divergence of global lock handling ACPICA: Use acpi_os_create_lock interface ACPI: osl, add acpi_os_create_lock interface ACPI:Fix goto flows in thermal-sys
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6由 Linus Torvalds 提交于
* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: x86 idle: deprecate mwait_idle() and "idle=mwait" cmdline param x86 idle: deprecate "no-hlt" cmdline param x86 idle APM: deprecate CONFIG_APM_CPU_IDLE x86 idle floppy: deprecate disable_hlt() x86 idle: EXPORT_SYMBOL(default_idle, pm_idle) only when APM demands it x86 idle: clarify AMD erratum 400 workaround idle governor: Avoid lock acquisition to read pm_qos before entering idle cpuidle: menu: fixed wrapping timers at 4.294 seconds
-
由 Al Viro 提交于
Commit 1495f230 ("vmscan: change shrinker API by passing shrink_control struct") changed the API of ->shrink(), but missed ubifs and cifs instances. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Boaz Harrosh 提交于
Implement pg_test vector to test for max IO sizes. We calculate a max_io_size member only once, and cache it in lseg so to not do so on every page insert. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> [simplify logic] Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
由 Boaz Harrosh 提交于
By default, unless pnfs is used coalesce pages until pg_bsize (rsize or wsize) is reached. pnfs layout drivers define their own pg_test methods that use pnfs_generic_pg_test and need to define their own I/O size limits (e.g. based on the file stripe size). [Move a check from nfs_pageio_do_add_request to nfs_generic_pg_test] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
由 Benny Halevy 提交于
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
由 Benny Halevy 提交于
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
由 Benny Halevy 提交于
Use common code for pnfs_pageio_init_{read,write} and use a common generic pg_test function. Note that this function always assumes the the layout driver's pg_test method is implemented. [Fix BUG] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
由 Boaz Harrosh 提交于
* Define API for io-engines to report delta_space_used in IOs * Encode the osd-layout specific information of the layoutcommit XDR buffer. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
由 Benny Halevy 提交于
Add a layout driver method to encode the layout type specific opaque part of layout commit in-line in the xdr stream. Currently, the pnfs-objects layout driver uses it to encode metadata hints to the MDS and the blocks layout driver to commit provisionally allocated extents to the file. Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
由 Boaz Harrosh 提交于
An io_state pre-allocates an error information structure for each possible osd-device that might error during IO. When IO is done if all was well the io_state is freed. (as today). If the I/O has ended with an error, the io_state is queued on a per-layout err_list. When eventually encode_layoutreturn() is called, each error is properly encoded on the XDR buffer and only then the io_state is removed from err_list and de-allocated. It is up to the io_engine to fill in the segment that fault and the type of osd_error that occurred. By calling objlayout_io_set_result() for each failing device. In objio_osd: * Allocate io-error descriptors space as part of io_state * Use generic objlayout error reporting at end of io. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-