- 17 3月, 2011 29 次提交
-
-
由 Sam Ravnborg 提交于
entry.S access percpu + global data defined in sun4m_irq.c - so move the types to irq.h. This makes sparse happy and allow us to utilize asm-offsets later. Also updated a few comments in the sun4m_irq.c file. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
build_device_irq() is used to encapsulate the plaform specific details when we build an irq. For now the default is a simple 1:1 but sun4d differs. This patch refactors functionality - but does not change the existing functionality. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
sparc_irq_config is used to hold the platform specific irq setup. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
Add a few includes back required to build with floppy enabled Fix declaration of trapbase_cpu* so it is now consistent Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Stultz 提交于
This converts the sparc clocksources to use clocksource_register_hz/khz Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
A recent patch to the x86 randomization code caused me to take a quick look at what we do on sparc64, and in doing so I noticed that we sometimes calculate a non-page-aligned randomization value and stick it into mmap_base. I also noticed that since I copied the logic over from PowerPC, the powerpc code has tweaked the randomization ranges in ways that would benefit us as well. For one thing, we should allow up to at least 8MB of randomization otherwise huge-page regions when HPAGE_SIZE is 4MB never randomize at all. And on the 64-bit side we were using up to 4GB. Tone it down to 1GB as 4GB can result in a lot of address space wastage. Finally, make sure all computations are unsigned. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
- drop filename in file header - drop unused includes - add KERN_* to printk - fix spaces => tabs - add spaces after reserved words - drop all externs, they are now in header files Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
This looked like a bug to me. Add a comment so next reader is hopefully less confused. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
The preprocessor symbol was not defined and the code was therefore not in use. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
- drop filename in file header - drop unused includes - add description of sun4d interrupts (from davem) - add KERN_* to printk - fix spaces => tabs - add spaces after reserved words - fix indent of a whole code block in smp4d_boot_one_cpu() Note: two printk() was updated from debug to KERN_INFO in this code block - drop all externs, they are now in header files This is partly based on a patch from: David Miller <davem@davemloft.net> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
- drop filename in file header - drop unused includes - add description of sun4m interrupts (from davem) - add KERN_* to printk - fix spaces => tabs - add spaces after reserved words - drop all externs, they are now in header files This is partly based on a patch from: David Miller <davem@davemloft.net> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
- drop filename in header - drop unused includes - add description of sun4c interrupts (from davem) - add spaces after reserved words This is partly based on a patch from: David Miller <davem@davemloft.net> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
In preparation for cleaning up a number of files add declarations for irq and smp related data/functions to the relevant headers. This showed that the extern declaration of cputypval differed in the two files where it was used. As cputypval is defined like this: cputypval: .asciz "sun4c" the correct representation is a char array. Fix users to use the new declaration. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
The two methods included in tick14.c was nop because the static variable linux_lvl14 was always NULL. So remove the file and callers. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Hellstrom 提交于
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Hellstrom 提交于
The way a LEON is powered down is implemented differently depending on CHIP type. The AMBA Plug&Play system ID tells revision of GRLIB and CHIP. This is for example needed by the GR-LEON4-ITX board and the UT699. Previously the power down support for LEON was limited to SMP, now both SMP and UP systems use the instruction. Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
The generic irq support uses the term 'irq' for the allocated irq number. Fix it so sparc64 use the same term for an irq as the generic irq support does. For a naive reader this is less confusing. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
The generic irq support uses the term 'irq' for the allocated irq number. Fix it so sparc64 use the same term for an irq as the generic irq support does. For a naive reader this is less confusing. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
Drop all uses of deprecated genirq features. The irq_set_affinity() call got a third paramter 'force' which is unused. For now genirq does not use this paramter and it is ignored by sparc. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Josip Rodin <joy@entuzijast.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
{get,set}_irq_data uses the member "handler_data" in irq_data which fits the naem of the datatype. The change has no functional impact Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
In preparation of moving to use irq_data.handler_data rename all pointers to irq_handler_data "handler_data". This will also prevent name clash when we introduce the new irq methods. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
The generic irq support uses "irq" to identify the virtual irq number. To avoid confusion rename the argument to handler_irq() to pil to match the name of the parameter in the PCR register. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
GENERIC_HARDIRQS_NO_DEPRECATED require us to access data via irq_data. No functional changes as data has same layout due to use of union Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kristoffer Glembo 提交于
Order of kfree and free_pages were swapped in the error handling. Signed-off-by: NKristoffer Glembo <kristoffer@gaisler.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kristoffer Glembo 提交于
Signed-off-by: NKristoffer Glembo <kristoffer@gaisler.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kristoffer Glembo 提交于
Signed-off-by: NKristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kristoffer Glembo 提交于
This patch sets the dma_ops structure for LEON. It reuses the pci32_dma_ops. Signed-off-by: NKristoffer Glembo <kristoffer@gaisler.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kristoffer Glembo 提交于
Signed-off-by: NKristoffer Glembo <kristoffer@gaisler.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kristoffer Glembo 提交于
Signed-off-by: NKristoffer Glembo <kristoffer@gaisler.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2011 1 次提交
-
-
由 Grant Likely 提交于
Get rid of old users of of_platform_driver in arch/sparc. Most of_platform_driver users can be converted to use the platform_bus directly. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 16 2月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Doing NMI startup as an early initcall doesn't work because we need to have SMP started up by then. So we'd only NMI startup one cpu, which causes perf PMU grab to BUG because the nmi_active count isn't what it's supposed to be. This also points out that we don't have proper CPU up/down notifiers for the NMI code which will need to be fixed at some point. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2011 1 次提交
-
-
由 Akinobu Mita 提交于
iommu_alloc_ctx() finds a zero bit in iommu->ctx_bitmap. It starts searching from iommu->ctx_lowest_free to the end of the bitmap. But the size argument to find_next_zero_bit() in iommu_alloc_ctx() is wrong. It should be the bitmap size, not the maximum size to search from the offset argument. Fortunately iommu->ctx_lowest_free is almost unused and it will not be more than 1. So the bug wasted only 1-bit at the end of iommu->ctx_bitmap. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 2月, 2011 1 次提交
-
-
由 Daniel Hellstrom 提交于
Since commit f0e98c38 ("[SPARC]: Fix link errors with gcc-4.3") the MNA trap handler does not emulate stores to unaligned addresses correctly. MNA operation from both kernel and user space are affected. A typical effect of this bug is nr_frags in skbs are overwritten during buffer copying/checksum-calculation, or maximally 6 bytes of data in the network buffer will be overwitten with garbage. Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 1月, 2011 1 次提交
-
-
由 Torben Hohn 提交于
xtime_update() takes the xtime_lock itself. pcic_clear_clock_irq() and clear_clock_irq do not need to be protected by xtime_lock. Signed-off-by: NTorben Hohn <torbenh@gmx.de> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: johnstul@us.ibm.com Cc: hch@infradead.org Cc: yong.zhang0@gmail.com LKML-Reference: <20110127150022.23248.80369.stgit@localhost> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 25 1月, 2011 1 次提交
-
-
由 Tejun Heo 提交于
Currently percpu readmostly subsection may share cachelines with other percpu subsections which may result in unnecessary cacheline bounce and performance degradation. This patch adds @cacheline parameter to PERCPU() and PERCPU_VADDR() linker macros, makes each arch linker scripts specify its cacheline size and use it to align percpu subsections. This is based on Shaohua's x86 only patch. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Shaohua Li <shaohua.li@intel.com>
-
- 14 1月, 2011 1 次提交
-
-
由 David Rientjes 提交于
Four architectures (arm, mips, sparc, x86) use __vmalloc_area() for module_init(). Much of the code is duplicated and can be generalized in a globally accessible function, __vmalloc_node_range(). __vmalloc_node() now calls into __vmalloc_node_range() with a range of [VMALLOC_START, VMALLOC_END) for functionally equivalent behavior. Each architecture may then use __vmalloc_node_range() directly to remove the duplication of code. Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 1月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Commit 004417a6 ("perf, arch: Cleanup perf-pmu init vs lockup-detector") move the perf events init to be an early_initcall. But this won't work properly unless the dependencies for this code initialize beforehand. Fix it by making cpu_type_probe and pcr_arch_init be an early_initcall as well. Reported-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 1月, 2011 3 次提交
-
-
由 Sam Ravnborg 提交于
We use "_start" in 64 bit - do the same in 32 bit. It is always good to be consistent. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
start and trapbase point to the same address. But using start to assing to sparc_ttable looked confusing. Replace this with the use of trapbase. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Hellstrom 提交于
When the REG property is not available the NODE-ID is used as an unique identifier in order to avoid filesystem name duplicates in /proc/openprom filesystem Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-