- 05 12月, 2010 3 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
As our SMP implementation uses MESI protocols. Grouping together data which is mostly only read together means that we avoid unnecessary cache line bouncing when this code shares a cache line with other data. In other words, cache lines associated with read-mostly data are expected to spend most of their time in shared state. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Hans Ulli Kroll 提交于
Today more boards with arm cpu have selectable pci bus. This patch makes this more scalable and remove line continuations in Kconfig Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NHans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 26 11月, 2010 3 次提交
-
-
由 Linus Walleij 提交于
On some contemporary sub-micron SoCs, peripherals on the chip have power domain switches, i.e. the voltage to the core may be turned off to conserve power. In the Ux500 we have this for out PrimeCell derivates. This patch makes it possible to specify an (optional) regulator to handle the voltage domain switch on AMBA PrimeCells, modeled very similar to how block clocks are handled. Additional amba_vcore_[enable|disable] calls are supplied to make it possible introduce optional powering off of the core voltage. Using this will require code to spool/unspool any core HW state. Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Cc: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
swp_emulate is only used on ARMv7+, and includes ARMv7+ assembly instructions. Allow the assembler to accept ARMv7 instructions, but leave the compiler's code generation options alone. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture. as the code is identical at 99% put the arch specific code for allocation as example in asm/clkdev.h Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 04 11月, 2010 4 次提交
-
-
由 Leif Lindholm 提交于
The SWP instruction was deprecated in the ARMv6 architecture, superseded by the LDREX/STREX family of instructions for load-linked/store-conditional operations. The ARMv7 multiprocessing extensions mandate that SWP/SWPB instructions are treated as undefined from reset, with the ability to enable them through the System Control Register SW bit. This patch adds the alternative solution to emulate the SWP and SWPB instructions using LDREX/STREX sequences, and log statistics to /proc/cpu/swp_emulation. To correctly deal with copy-on-write, it also modifies cpu_v7_set_pte_ext to change the mappings to priviliged RO when user RO. Signed-off-by: NLeif Lindholm <leif.lindholm@arm.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
This patch removes the domain switching functionality via the set_fs and __switch_to functions on cores that have a TLS register. Currently, the ioremap and vmalloc areas share the same level 1 page tables and therefore have the same domain (DOMAIN_KERNEL). When the kernel domain is modified from Client to Manager (via the __set_fs or in the __switch_to function), the XN (eXecute Never) bit is overridden and newer CPUs can speculatively prefetch the ioremap'ed memory. Linux performs the kernel domain switching to allow user-specific functions (copy_to/from_user, get/put_user etc.) to access kernel memory. In order for these functions to work with the kernel domain set to Client, the patch modifies the LDRT/STRT and related instructions to the LDR/STR ones. The user pages access rights are also modified for kernel read-only access rather than read/write so that the copy-on-write mechanism still works. CPU_USE_DOMAINS gets disabled only if the hardware has a TLS register (CPU_32v6K is defined) since writing the TLS value to the high vectors page isn't possible. The user addresses passed to the kernel are checked by the access_ok() function so that they do not point to the kernel space. Tested-by: NAnton Vorontsov <cbouatmailru@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Wu Fengguang 提交于
Fix regression introduced by commit 79da826a ("writeback: report dirty thresholds in /proc/vmstat"). The incorrect pointer arithmetic can result in problems like this: BUG: unable to handle kernel paging request at 07c06d16 IP: [<c050c336>] strnlen+0x6/0x20 Call Trace: [<c050a249>] ? string+0x39/0xe0 [<c042be6b>] ? __wake_up_common+0x4b/0x80 [<c050afcc>] ? vsnprintf+0x1ec/0x380 [<c04b380e>] ? seq_printf+0x2e/0x60 [<c04829a6>] ? vmstat_show+0x26/0x30 [<c04b3bb6>] ? seq_read+0xa6/0x380 [<c04b3b10>] ? seq_read+0x0/0x380 [<c04d5d2f>] ? proc_reg_read+0x5f/0x90 [<c049c4a1>] ? vfs_read+0xa1/0x140 [<c04d5cd0>] ? proc_reg_read+0x0/0x90 [<c049c981>] ? sys_read+0x41/0x70 [<c0402bd0>] ? sysenter_do_call+0x12/0x26 Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Michael Rubin <mrubin@google.com> Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: tpa6130a2: Get rid of compile warning from tpa6130a2_power ALSA: hda - MacBookAir3,1(3,2) alsa support ASoC: fix the building issue of missing codec field in 'struct snd_soc_card' ALSA: usb-audio - Support for Power/Status LED on Creative USB X-Fi S51 ALSA: asihpi - Unsafe memory management when allocating control cache ASoC: Update WARN uses in wm_hubs ASoC: Include cx20442 to SND_SOC_ALL_CODECS ASoC: Fix SND_SOC_ALL_CODECS typo for jz4740 ASoC: Remove volatility from WM8900 POWER1 register ALSA: lx6464es - make 1 bit signed bitfield unsigned ALSA: cs46xx memory management fixes for cs46xx_dsp_spos_create() ALSA: usb - driver neglects kmalloc return value check and may deref NULL ASoC: tpa6130a2: Fix unbalanced regulator disables ASoC: tlv320dac33: Mode1 FIFO auto configuration fix ASoC: tlv320dac33: Limit the US_TO_SAMPLES macro ASoC: tlv320dac33: Error handling for broken chip ASoC: Check return value of struct_strtoul() in pmdown_time_set()
-
- 03 11月, 2010 5 次提交
-
-
由 Takashi Iwai 提交于
-
由 Jarkko Nikula 提交于
Patch "ASoC: tpa6130a2: Fix unbalanced regulator disables" introduced a compiler warning "‘ret’ may be used uninitialized in this function". Initialize ret to zero to get rid of it and making sure that the function does not return any random error code when the code is falling through. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Merge branch 'for-2.6.37' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into fix/asoc
-
由 Edgar (gimli) Hucek 提交于
This patch add support for the MacBookAir3,1 and MacBookAir3,2 to the alsa sound system. Signed-off-by: NEdgar (gimli) Hucek <gimli@dark-green.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Michel Lespinasse 提交于
This slipped by when unifying the filemap and swap versions of lock_page_or_retry()... Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 11月, 2010 9 次提交
-
-
由 Theodore Ts'o 提交于
Linus noted, and complained to me, that doing while lots of "git diff"'s of kernel sources, these spinlocks were responsible for 27% of the spinlock cost on his two-processor system as reported by perf. Git was doing lots of parallel stats, and this was putting a lot of pressure on ext4_getattr(). A spinlock to protect a single memory-to-memory copy is pointless, so remove it. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Brown 提交于
-
由 Eric Miao 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Arnd Bergmann 提交于
The preempt count logic tries to take the BKL into account, which breaks when CONFIG_BKL is not set. Use the same preempt_count offset that we use without CONFIG_PREEMPT when CONFIG_BKL is disabled. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reported-and-tested-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mandar Joshi 提交于
This patch adds support for Power/Status LED on Creative USB X-Fi S51. There is just one LED on the device. The LED can either be On or it can be set to Blink. There doesn't seem to be a way to switch it off. The control message to change LED status is similar to that of audigy2nx except that the index is to be set to 0 and value is 1 for Blink and 0 for On. The 'Power LED' control in alsamixer when muted will cause the LED to Blink continuously. When unmuted the LED will stay On. The Creative driver under Windows sets the LED to blink whenever audio is muted. This LED can be treated as the CMSS LED but I figured since there is just one LED, it should be treated as the Power LED. Is that alright? I've also changed the comment "Usb X-Fi" to "Usb X-Fi S51" as there are other external X-Fi devices from Creative like Usb X-Fi Go and Xmod. The volume knob and LED support patch doesn't apply to them. Signed-off-by: NMandar Joshi <emailmandar@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jesper Juhl 提交于
I noticed that sound/pci/asihpi/hpicmn.c::hpi_alloc_control_cache() does not check the return value from kmalloc(), which may fail. If kmalloc() fails we'll dereference a null pointer and things will go bad fast. There are two memory allocations in that function and there's also the problem that the first may succeed and the second may fail and nothing is done about that either which will also go wrong down the line. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Acked-by: NEliot Blennerhassett <linux@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Andy Whitcroft 提交于
When expanding a parameterised string we may run out of space, this triggers a realloc. When computing the new allocation size we do not allow for the terminating '\0'. Allow for this when calculating the new length. Signed-off-by: NAndy Whitcroft <apw@canonical.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Mundt 提交于
Commit 7d945a3a ("logfs get_sb, part 3") broke the logfs build when CONFIG_MTD is set due to a mangled logfs_get_sb_mtd() definition. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Add missing newlines. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 01 11月, 2010 16 次提交
-
-
由 Jarkko Nikula 提交于
Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jarkko Nikula 提交于
Include jz4740.c to SND_SOC_ALL_CODECS when the dependencies are met. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Not all bits can be read back from POWER1 so avoid corruption when using a read/modify/write cycle by marking it non-volatile - the only thing we read back from it is the chip revision which has diagnostic value only. We can re-add later but that's a more invasive change than is suitable for a bugfix. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
-
由 Linus Torvalds 提交于
-
git://www.jni.nu/cris由 Linus Torvalds 提交于
* 'for-linus' of git://www.jni.nu/cris: CRIS: Add paths for CRISv10 serial driver CRIS: Fix RS485 delay handling. Add missing "struct" to in sizeof.
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: fix erroneous platform data in U300 spi: fixed odd static string conventions in core code spi/bfin_spi: only request GPIO on first load spi/bfin_spi: handle error/status changes after data interrupts spi: enable spi_board_info to be registered after spi_master
-
由 Jesper Nilsson 提交于
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>
-
由 Tim Blechmann 提交于
converts a 1 bit signed bitfield to an unsigned. Reported-by: NDr. David Alan Gilbert <linux@treblig.org> Signed-off-by: NTim Blechmann <tim@klingt.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jesper Juhl 提交于
When reading through sound/pci/cs46xx/dsp_spos.c I noticed a couple of things in cs46xx_dsp_spos_create(). It seems to me that we don't always free the various memory buffers we allocate and we also do some work (structure member assignment) early, that is completely pointless if some of the memory allocations fail and we end up just aborting the whole thing. I don't have hardware to test, so the patch below is compile tested only, but it makes the following changes: - Make sure we always free all allocated memory on failures. - Don't do pointless work assigning to structure members before we know all memory allocations, that may abort progress, have completed successfully. - Remove some trailing whitespace. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Tested-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jesper Juhl 提交于
sound/usb/pcm.c::snd_usb_pcm_check_knot() fails to check the return value from kmalloc() and may end up dereferencing a null pointer. The patch below (compile tested only) should take care of that little problem. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Linus Walleij 提交于
This fixes an erroneous use of LSB first in the U300 machine, the PL022 used in U300 is a standard ARM core that doesn't support this bit so it should never have been set. Cc: Kevin Wells <wellsk40@gmail.com>OA Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Dmitry Torokhov 提交于
We were forgetting to set up proper return value in success path causing ir_getkeycode() to fail intermittently: drivers/media/IR/ir-keytable.c: In function 'ir_getkeycode': drivers/media/IR/ir-keytable.c:363: warning: 'retval' may be used uninitialized in this function Reported-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-i801: Add PCI idents for Patsburg 'IDF' SMBus controllers i2c-i801: Handle multiple instances instead of keeping global state i2c-i801: Add Intel Patsburg device ID i2c: Drop unused I2C_CLASS_TV flags
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - remove extra KERN_DEBUG use from dprintk Input: bu21013_ts - fix null dereference in error handling Input: ad7879 - prevent invalid finger data reports
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (70 commits) [SCSI] pmcraid: add support for set timestamp command and other fixes [SCSI] pmcraid: remove duplicate struct member [SCSI] qla4xxx: Fix cmd check in qla4xxx_cmd_wait [SCSI] megaraid_sas: Version and documentation update [SCSI] megaraid_sas: Add three times Online controller reset [SCSI] megaraid_sas: Add input parameter for max_sectors [SCSI] megaraid_sas: support devices update flag [SCSI] libosd: write/read_sg_kern API [SCSI] libosd: Support for scatter gather write/read commands [SCSI] libosd: Free resources in reverse order of allocation [SCSI] libosd: Fix bug in attr_page handling [SCSI] lpfc 8.3.18: Update lpfc driver version to 8.3.18 [SCSI] lpfc 8.3.18: Add new WQE support [SCSI] lpfc 8.3.18: Fix critical errors [SCSI] lpfc 8.3.18: Adapter Shutdown and Unregistration cleanup [SCSI] lpfc 8.3.18: Add logic to detect last devloss timeout [SCSI] lpfc 8.3.18: Add support of received ELS commands [SCSI] lpfc 8.3.18: FC/FCoE Discovery fixes [SCSI] ipr: add definitions for a new adapter [SCSI] bfa: fix comments for c files ...
-
由 Linus Torvalds 提交于
Merge branches 'irq-core-for-linus' and 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix up irq_node() for irq_data changes. genirq: Add single IRQ reservation helper genirq: Warn if enable_irq is called before irq is set up * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: semaphore: Remove mutex emulation staging: Final semaphore cleanup jbd2: Convert jbd2_slab_create_sem to mutex hpfs: Convert sbi->hpfs_creation_de to mutex Fix up trivial change/delete conflicts with deleted 'dream' drivers (drivers/staging/dream/camera/{mt9d112.c,mt9p012_fox.c,mt9t013.c,s5k3e2fx.c})
-