Currently, blkg's are embedded in private data blkcg policy private
data structure and thus allocated and freed by policies.  This leads
to duplicate codes in policies, hinders implementing common part in
blkcg core with strong semantics, and forces duplicate blkg's for the
same cgroup-q association.

This patch introduces struct blkg_policy_data which is a separate data
structure chained from blkg.  Policies specifies the amount of private
data it needs in its blkio_policy_type->pdata_size and blkcg core
takes care of allocating them along with blkg which can be accessed
using blkg_to_pdata().  blkg can be determined from pdata using
pdata_to_blkg().  blkio_alloc_group_fn() method is accordingly updated
to blkio_init_group_fn().

For consistency, tg_of_blkg() and cfqg_of_blkg() are replaced with
blkg_to_tg() and blkg_to_cfqg() respectively, and functions to map in
the reverse direction are added.

Except that policy specific data now lives in a separate data
structure from blkg, this patch doesn't introduce any functional
difference.

This will be used to unify blkg's for different policies.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Keep track of all request_queues which have blkcg initialized and turn
on bypass and invoke blkcg_clear_queue() on all before making changes
to blkcg policies.

This is to prepare for moving blkg management into blkcg core.  Note
that this uses more brute force than necessary.  Finer grained shoot
down will be implemented later and given that policy [un]registration
almost never happens on running systems (blk-throtl can't be built as
a module and cfq usually is the builtin default iosched), this
shouldn't be a problem for the time being.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently block core calls directly into blk-throttle for init, drain
and exit.  This patch adds blkcg_{init|drain|exit}_queue() which wraps
the blk-throttle functions.  This is to give more control and
visiblity to blkcg core layer for proper layering.  Further patches
will add logic common to blkcg policies to the functions.

While at it, collapse blk_throtl_release() into blk_throtl_exit().
There's no reason to keep them separate.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blkg points to the associated blkcg via its css_id.  This
unnecessarily complicates dereferencing blkcg.  Let blkg hold a
reference to the associated blkcg and point directly to it and disable
css_id on blkio_subsys.

This change requires splitting blkiocg_destroy() into
blkiocg_pre_destroy() and blkiocg_destroy() so that all blkg's can be
destroyed and all the blkcg references held by them dropped during
cgroup removal.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk-cgroup printing code currently assumes that there is a device/disk
associated with every queue in the system, but modules like floppy,
can instantiate request queues without registering disk which can lead
to oops.

Skip the queue/blkg which don't have dev/disk associated with them.

-tj: Factored out backing_dev_info check into blkg_dev_name().
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkg->dev is dev_t recording the device number of the block device for
the associated request_queue.  It is used to identify the associated
block device when printing out configuration or stats.

This is redundant to begin with.  A blkg is an association between a
cgroup and a request_queue and it of course is possible to reach
request_queue from blkg and synchronization conventions are in place
for safe q dereferencing, so this shouldn't be necessary from the
beginning.  Furthermore, it's initialized by sscanf()ing the device
name of backing_dev_info.  The mind boggles.

Anyways, if blkg is visible under rcu lock, we *know* that the
associated request_queue hasn't gone away yet and its bdi is
registered and alive - blkg can't be created for request_queue which
hasn't been fully initialized and it can't go away before blkg is
removed.

Let stat and conf read functions get device name from
blkg->q->backing_dev_info.dev and pass it down to printing functions
and remove blkg->dev.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that blkcg configuration lives in blkg's, blkio_policy_node is no
longer necessary.  Kill it.

blkio_policy_parse_and_set() now fails if invoked for missing device
and functions to print out configurations are updated to print from
blkg's.

cftype_blkg_same_policy() is dropped along with other policy functions
for consistency.  Its one line is open coded in the only user -
blkio_read_blkg_stats().

-v2: Update to reflect the retry-on-bypass logic change of the
     previous patch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkcg is very peculiar in that it allows setting and remembering
configurations for non-existent devices by maintaining separate data
structures for configuration.

This behavior is completely out of the usual norms and outright
confusing; furthermore, it uses dev_t number to match the
configuration to devices, which is unpredictable to begin with and
becomes completely unuseable if EXT_DEVT is fully used.

It is wholely unnecessary - we already have fully functional userland
mechanism to program devices being hotplugged which has full access to
device identification, connection topology and filesystem information.

Add a new struct blkio_group_conf which contains all blkcg
configurations to blkio_group and let blkio_group, which can be
created iff the associated device exists and is removed when the
associated device goes away, carry all configurations.

Note that, after this patch, all newly created blkg's will always have
the default configuration (unlimited for throttling and blkcg's weight
for propio).

This patch makes blkio_policy_node meaningless but doesn't remove it.
The next patch will.

-v2: Updated to retry after short sleep if blkg lookup/creation failed
     due to the queue being temporarily bypassed as indicated by
     -EBUSY return.  Pointed out by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently both blk-throttle and cfq-iosched implement their own
blkio_group creation code in throtl_get_tg() and cfq_get_cfqg().  This
patch factors out the common code into blkg_lookup_create(), which
returns ERR_PTR value so that transitional failures due to queue
bypass can be distinguished from other failures.

* New plkio_policy_ops methods blkio_alloc_group_fn() and
  blkio_link_group_fn added.  Both are transitional and will be
  removed once the blkg management code is fully moved into
  blk-cgroup.c.

* blkio_alloc_group_fn() allocates policy-specific blkg which is
  usually a larger data structure with blkg as the first entry and
  intiailizes it.  Note that initialization of blkg proper, including
  percpu stats, is responsibility of blk-cgroup proper.

  Note that default config (weight, bps...) initialization is done
  from this method; otherwise, we end up violating locking order
  between blkcg and q locks via blkcg_get_CONF() functions.

* blkio_link_group_fn() is called under queue_lock and responsible for
  linking the blkg to the queue.  blkcg side is handled by blk-cgroup
  proper.

* The common blkg creation function is named blkg_lookup_create() and
  blkiocg_lookup_group() is renamed to blkg_lookup() for consistency.
  Also, throtl / cfq related functions are similarly [re]named for
  consistency.

This simplifies blkcg policy implementations and enables further
cleanup.

-v2: Vivek noticed that blkg_lookup_create() incorrectly tested
     blk_queue_dead() instead of blk_queue_bypass() leading a user of
     the function ending up creating a new blkg on bypassing queue.
     This is a bug introduced while relocating bypass patches before
     this one.  Fixed.

-v3: ERR_PTR patch folded into this one.  @for_root added to
     blkg_lookup_create() to allow creating root group on a bypassed
     queue during elevator switch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For root blkg, blk_throtl_init() was using throtl_alloc_tg()
explicitly and cfq_init_queue() was manually initializing embedded
cfqd->root_group, adding unnecessarily different code paths to blkg
handling.

Make both use the usual blkio_group get functions - throtl_get_tg()
and cfq_get_cfqg() - for the root blkio_group too.  Note that
blk_throtl_init() callsite is pushed downwards in
blk_alloc_queue_node() so that @q is sufficiently initialized for
throtl_get_tg().

This simplifies root blkg handling noticeably for cfq and will allow
further modularization of blkcg API.

-v2: Vivek pointed out that using cfq_get_cfqg() won't work if
     CONFIG_CFQ_GROUP_IOSCHED is disabled.  Fix it by factoring out
     initialization of base part of cfqg into cfq_init_cfqg_base() and
     alloc/init/free explicitly if !CONFIG_CFQ_GROUP_IOSCHED.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Block cgroup policies are maintained in a linked list and,
theoretically, multiple policies sharing the same policy ID are
allowed.

This patch temporarily restricts one policy per plid and adds
blkio_policy[] array which indexes registered policy types by plid.
Both the restriction and blkio_policy[] array are transitional and
will be removed once API cleanup is complete.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkgio_group is association between a block cgroup and a queue for a
given policy.  Using opaque void * for association makes things
confusing and hinders factoring of common code.  Use request_queue *
and, if necessary, policy id instead.

This will help block cgroup API cleanup.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In both blkg get functions - throtl_get_tg() and cfq_get_cfqg(),
instead of obtaining blkcg of %current explicitly, let the caller
specify the blkcg to use as parameter and make both functions hold on
to the blkcg.

This is part of block cgroup interface cleanup and will help making
blkcg API more modular.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

rcu_read_lock() in throtl_get_tb() and cfq_get_cfqg() holds onto
@blkcg while looking up blkg.  For API cleanup, the next patch will
make the caller responsible for determining @blkcg to look blkg from
and let them specify it as a parameter.  Move rcu read locking out to
the callers to prepare for the change.

-v2: Originally this patch was described as a fix for RCU read locking
     bug around @blkg, which Vivek pointed out to be incorrect.  It
     was from misunderstanding the role of rcu locking as protecting
     @blkg not @blkcg.  Patch description updated.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Elevator switch may involve changes to blkcg policies.  Implement
shoot down of blkio_groups.

Combined with the previous bypass updates, the end goal is updating
blkcg core such that it can ensure that blkcg's being affected become
quiescent and don't have any per-blkg data hanging around before
commencing any policy updates.  Until queues are made aware of the
policies that applies to them, as an interim step, all per-policy blkg
data will be shot down.

* blk-throtl doesn't need this change as it can't be disabled for a
  live queue; however, update it anyway as the scheduled blkg
  unification requires this behavior change.  This means that
  blk-throtl configuration will be unnecessarily lost over elevator
  switch.  This oddity will be removed after blkcg learns to associate
  individual policies with request_queues.

* blk-throtl dosen't shoot down root_tg.  This is to ease transition.
  Unified blkg will always have persistent root group and not shooting
  down root_tg for now eases transition to that point by avoiding
  having to update td->root_tg and is safe as blk-throtl can never be
  disabled

-v2: Vivek pointed out that group list is not guaranteed to be empty
     on return from clear function if it raced cgroup removal and
     lost.  Fix it by waiting a bit and retrying.  This kludge will
     soon be removed once locking is updated such that blkg is never
     in limbo state between blkcg and request_queue locks.

     blk-throtl no longer shoots down root_tg to avoid breaking
     td->root_tg.

     Also, Nest queue_lock inside blkio_list_lock not the other way
     around to avoid introduce possible deadlock via blkcg lock.

-v3: blkcg_clear_queue() repositioned and renamed to
     blkg_destroy_all() to increase consistency with later changes.
     cfq_clear_queue() updated to check q->elevator before
     dereferencing it to avoid NULL dereference on not fully
     initialized queues (used by later change).
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Extend queue bypassing such that dying queue is always bypassing and
blk-throttle is drained on bypass.  With blkcg policies updated to
test blk_queue_bypass() instead of blk_queue_dead(), this ensures that
no bio or request is held by or going through blkcg policies on a
bypassing queue.

This will be used to implement blkg cleanup on elevator switches and
policy changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Rename and extend elv_queisce_start/end() to
blk_queue_bypass_start/end() which are exported and supports nesting
via @q->bypass_depth.  Also add blk_queue_bypass() to test bypass
state.

This will be further extended and used for blkio_group management.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

elevator_ops->elevator_init_fn() has a weird return value.  It returns
a void * which the caller should assign to q->elevator->elevator_data
and %NULL return denotes init failure.

Update such that it returns integer 0/-errno and sets elevator_data
directly as necessary.

This makes the interface more conventional and eases further cleanup.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Elevator switch tries hard to keep as much as context until new
elevator is ready so that it can revert to the original state if
initializing the new elevator fails for some reason.  Unfortunately,
with more auxiliary contexts to manage, this makes elevator init and
exit paths too complex and fragile.

This patch makes elevator_switch() unregister the current elevator and
flush icq's before start initializing the new one.  As we still keep
the old elevator itself, the only difference is that we lose icq's on
rare occassions of switching failure, which isn't critical at all.

Note that this makes explicit elevator parameter to
elevator_init_queue() and __elv_register_queue() unnecessary as they
always can use the current elevator.

This patch enables block cgroup cleanups.

-v2: blk_add_trace_msg() prints elevator name from @new_e instead of
     @e->type as the local variable no longer exists.  This caused
     build failure on CONFIG_BLK_DEV_IO_TRACE.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

cfq has been registering zeroed blkio_poilcy_cfq if CFQ_GROUP_IOSCHED
is disabled.  This fortunately doesn't collide with blk-throtl as
BLKIO_POLICY_PROP is zero but is unnecessary and risky.  Just don't
register it if not enabled.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Block cgroup core can be built as module; however, it isn't too useful
as blk-throttle can only be built-in and cfq-iosched is usually the
default built-in scheduler.  Scheduled blkcg cleanup requires calling
into blkcg from block core.  To simplify that, disallow building blkcg
as module by making CONFIG_BLK_CGROUP bool.

If building blkcg core as module really matters, which I doubt, we can
revisit it after blkcg API cleanup.

-v2: Vivek pointed out that IOSCHED_CFQ was incorrectly updated to
     depend on BLK_CGROUP.  Fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blk_cleanup_queue() doesn't call elv_drain_elevator() if
q->elevator doesn't exist; however, bio based drivers don't have
elevator initialized but can still use blk-throttle.  This patch moves
q->elevator test inside blk_drain_queue() such that only
elv_drain_elevator() is skipped if !q->elevator.

-v2: loop can have registered queue which has NULL request_fn.  Make
     sure we don't call into __blk_run_queue() in such cases.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NVivek Goyal <vgoyal@redhat.com>

Fold in bug fix from Vivek.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

"mem" is type u8.  We need parenthesis here or it screws up the pointer
math probably leading to an oops.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch (as1519) fixes a bug in the block layer's disk-events
polling.  The polling is done by a work routine queued on the
system_nrt_wq workqueue.  Since that workqueue isn't freezable, the
polling continues even in the middle of a system sleep transition.

Obviously, polling a suspended drive for media changes and such isn't
a good thing to do; in the case of USB mass-storage devices it can
lead to real problems requiring device resets and even re-enumeration.

The patch fixes things by creating a new system-wide, non-reentrant,
freezable workqueue and using it for disk-events polling.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: <stable@kernel.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Set CommandMailbox with memset before use it. Fix for:

drivers/block/DAC960.c: In function ‘DAC960_V1_EnableMemoryMailboxInterface’:
arch/x86/include/asm/io.h:61:1: warning: ‘CommandMailbox.Bytes[12]’
 may be used uninitialized in this function [-Wuninitialized]
drivers/block/DAC960.c:1175:30: note: ‘CommandMailbox.Bytes[12]’
 was declared here
Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fixed compiler warning:

comparison between ‘DAC960_V2_IOCTL_Opcode_T’ and ‘enum <anonymous>’

Renamed enum, added a new enum for SCSI_10.CommandOpcode in
DAC960_V2_ProcessCompletedCommand().
Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The following situation might occur:

__blkdev_get:			add_disk:

				register_disk()
get_gendisk()

disk_block_events()
	disk->ev == NULL

				disk_add_events()

__disk_unblock_events()
	disk->ev != NULL
	--ev->block

Then we unblock events, when they are suppose to be blocked. This can
trigger events related block/genhd.c warnings, but also can crash in
sd_check_events() or other places.

I'm able to reproduce crashes with the following scripts (with
connected usb dongle as sdb disk).

<snip>
DEV=/dev/sdb
ENABLE=/sys/bus/usb/devices/1-2/bConfigurationValue

function stop_me()
{
	for i in `jobs -p` ; do kill $i 2> /dev/null ; done
	exit
}

trap stop_me SIGHUP SIGINT SIGTERM

for ((i = 0; i < 10; i++)) ; do
	while true; do fdisk -l $DEV  2>&1 > /dev/null ; done &
done

while true ; do
echo 1 > $ENABLE
sleep 1
echo 0 > $ENABLE
done
</snip>

I use the script to verify patch fixing oops in sd_revalidate_disk
http://marc.info/?l=linux-scsi&m=132935572512352&w=2
Without Jun'ichi Nomura patch titled "Fix NULL pointer dereference in
sd_revalidate_disk" or this one, script easily crash kernel within
a few seconds. With both patches applied I do not observe crash.
Unfortunately after some time (dozen of minutes), script will hung in:

[ 1563.906432]  [<c08354f5>] schedule_timeout_uninterruptible+0x15/0x20
[ 1563.906437]  [<c04532d5>] msleep+0x15/0x20
[ 1563.906443]  [<c05d60b2>] blk_drain_queue+0x32/0xd0
[ 1563.906447]  [<c05d6e00>] blk_cleanup_queue+0xd0/0x170
[ 1563.906454]  [<c06d278f>] scsi_free_queue+0x3f/0x60
[ 1563.906459]  [<c06d7e6e>] __scsi_remove_device+0x6e/0xb0
[ 1563.906463]  [<c06d4aff>] scsi_forget_host+0x4f/0x60
[ 1563.906468]  [<c06cd84a>] scsi_remove_host+0x5a/0xf0
[ 1563.906482]  [<f7f030fb>] quiesce_and_remove_host+0x5b/0xa0 [usb_storage]
[ 1563.906490]  [<f7f03203>] usb_stor_disconnect+0x13/0x20 [usb_storage]

Anyway I think this patch is some step forward.

As drawback, I do not teardown on sysfs file create error, because I do
not know how to nullify disk->ev (since it can be used). However add_disk
error handling practically does not exist too, and things will work
without this sysfs file, except events will not be exported to user
space.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix setting bio flags in drivers (sd_dif/floppy).
Signed-off-by: NMuthukumar R <muthur@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Since 2.6.39 (1196f8b8), when a driver returns -ENOMEDIUM for open(),
__blkdev_get() calls rescan_partitions() to remove
in-kernel partition structures and raise KOBJ_CHANGE uevent.

However it ends up calling driver's revalidate_disk without open
and could cause oops.

In the case of SCSI:

  process A                  process B
  ----------------------------------------------
  sys_open
    __blkdev_get
      sd_open
        returns -ENOMEDIUM
                             scsi_remove_device
                               <scsi_device torn down>
      rescan_partitions
        sd_revalidate_disk
          <oops>
Oopses are reported here:
http://marc.info/?l=linux-scsi&m=132388619710052

This patch separates the partition invalidation from rescan_partitions()
and use it for -ENOMEDIUM case.
Reported-by: NHuajun Li <huajun.li.lee@gmail.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <axboe@kernel.dk>

While updating locking, b2efa052 "block, cfq: unlink
cfq_io_context's immediately" moved elevator_exit_icq_fn() invocation
from exit_io_context() to the final ioc put.  While this doesn't cause
catastrophic failure, it effectively removes task exit notification to
elevator and cause noticeable IO performance degradation with CFQ.

On task exit, CFQ used to immediately expire the slice if it was being
used by the exiting task as no more IO would be issued by the task;
however, after b2efa052, the notification is lost and disk could sit
idle needlessly, leading to noticeable IO performance degradation for
certain workloads.

This patch renames ioc_exit_icq() to ioc_destroy_icq(), separates
elevator_exit_icq_fn() invocation into ioc_exit_icq() and invokes it
from exit_io_context().  ICQ_EXITED flag is added to avoid invoking
the callback more than once for the same icq.

Walking icq_list from ioc side and invoking elevator callback requires
reverse double locking.  This may be better implemented using RCU;
unfortunately, using RCU isn't trivial.  e.g. RCU protection would
need to cover request_queue and queue_lock switch on cleanup makes
grabbing queue_lock from RCU unsafe.  Reverse double locking should
do, at least for now.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-and-bisected-by: NShaohua Li <shli@kernel.org>
LKML-Reference: <CANejiEVzs=pUhQSTvUppkDcc2TNZyfohBRLygW5zFmXyk5A-xQ@mail.gmail.com>
Tested-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Reverse double lock dancing in ioc_release_fn() can be simplified by
just using trylock on the queue_lock and back out from ioc lock on
trylock failure.  Simplify it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Tested-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

icq->changed was used for ICQ_*_CHANGED bits.  Rename it to flags and
access it under ioc->lock instead of using atomic bitops.
ioc_get_changed() is added so that the changed part can be fetched and
cleared as before.

icq->flags will be used to carry other flags.
Signed-off-by: NTejun Heo <tj@kernel.org>
Tested-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

One small bug fix from Axel plus a fix for a build failure in unrealistic
but commonly built configs which for some reason manage to survive for
an awfully long time in -next without any reports.

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Fix getting voltage in max8649_enable_time()
  regulator: Fix mc13xxx regulator modular build (again)

Quoth BenH:
 "Here are a few powerpc fixes for 3.3, all pretty trivial.  I also
  added the patch to define GET_IP/SET_IP so we can use some more
  asm-generic goodness."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pseries/eeh: Fix crash when error happens during device probe
  powerpc/pseries: Fix partition migration hang in stop_topology_update
  powerpc/powernv: Disable interrupts while taking phb->lock
  powerpc: Fix WARN_ON in decrementer_check_overflow
  powerpc/wsp: Fix IRQ affinity setting
  powerpc: Implement GET_IP/SET_IP
  powerpc/wsp: Permanently enable PCI class code workaround

MMC fixes for 3.3-rc4:
 * The most visible fix here is against a regression introduced in 3.3-rc1
   that ran cards in Ultra High Speed mode even when they failed to initialize
   in that mode, leading to lower-speed cards failing to mount.
 * A lockdep warning introduced in 3.3-rc1 is fixed.
 * Various other small driver fixes, most notably for a NULL dereference
   when using highmem with dw_mmc.

* tag 'mmc-fixes-for-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: dw_mmc: Fix PIO mode with support of highmem
  mmc: atmel-mci: save and restore sdioirq when soft reset is performed
  mmc: block: Init ro_lock sysfs attr to fix lockdep warnings
  mmc: sh_mmcif: fix late delayed work initialisation
  mmc: tmio_mmc: fix card eject during IO with DMA
  mmc: core: Fix comparison issue in mmc_compare_ext_csds
  mmc: core: Fix PowerOff Notify suspend/resume
  mmc: sdhci-pci: set Medfield SDIO as non-removable
  mmc: core: add the capability for broken voltage
  mmc: core: Fix low speed mmc card detection failure
  mmc: esdhc: set the timeout to the max value
  mmc: esdhc: add PIO mode support
  mmc: core: Ensure clocks are always enabled before host interaction
  mmc: of_mmc_spi: fix little endian support
  mmc: core: UHS sdio card that fails should not exceed 50MHz
  mmc: esdhc: fix errors when booting kernel on Freescale eSDHC version 2.3

Merge tag 'stable/for-linus-fixes-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Two fixes for VCPU offlining; One to fix the string format exposed
by the xen-pci[front|back] to conform to the one used in majority of
PCI drivers; Two fixes to make the code more resilient to invalid
configurations.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* tag 'stable/for-linus-fixes-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xenbus_dev: add missing error check to watch handling
  xen/pci[front|back]: Use %d instead of %1x for displaying PCI devfn.
  xen pvhvm: do not remap pirqs onto evtchns if !xen_have_vector_callback
  xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic.
  xen/bootup: During bootup suppress XENBUS: Unable to read cpu state

sound fixes for 3.3-rc4

Basically all small fixes suited as rc4: a few HD-audio regression fixes,
a stable fix for an old Dell laptop with intel8x0, and a simple fix for
ASoC fsi.

* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: intel8x0: Fix default inaudible sound on Gateway M520
  ALSA: hda - Fix silent speaker output on Acer Aspire 6935
  ALSA: hda - Fix initialization of secondary capture source on VT1705
  ASoC: fsi: fixup fsi_pointer() calculation method
  ALSA: hda - Fix mute-LED VREF value for new HP laptops

BugLink: https://bugs.launchpad.net/bugs/930842

The reporter states that audio is inaudible by default without muting
'External Amplifier'. Add a quirk to handle his SSID so that changing
the control is not necessary.
Reported-and-tested-by: NBenjamin Carlson <elderbubba0810@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A simple fix from Morimoto-san for the pointer() operation in the FSI
driver.

* git://git.samba.org/sfrench/cifs-2.6:
  cifs: don't return error from standard_receive3 after marking response malformed
  cifs: request oplock when doing open on lookup
  cifs: fix error handling when cifscreds key payload is an error