Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There are cases where we want to know if there is a full, or aliased
PPGTT. Currently, in fact the only distinction we ever need to make is
when we're using full PPGTT.

This patch is simply to promote readability and clarify for the
confusing existing usage where "aliasing" meant aliasing and full.

v2: Remove USES_ALIASING_PPGTT since there are currently no cases where
we need to check if we're using aliasing, but not full PPGTT. (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Having to use i915.i915_foo is inconsistent and a bit on the verbose
side. Drop the prefix per Daniel's request, who also says this is not
ABI we need to maintain.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

At least I couldn't find it in the Haswell Bspec any more and we've
tried to test-boot a Haswell machine with num_pipes forced to 0 (i.e.
hit the PCH_NOP path) and the unclaimed register logic complained.

So restrict this dance to just ivb platforms.

v2: Art pointed out that the bits simply moved on hsw+

v3: Buy code terseneness with a notch of sublety as suggested by
Chris.

v4: Frob the right bit, spotted by Art.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arthur Ranyan <arthur.j.runyan@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: NArt Runyan <arthur.j.runyan@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A lot of the WM functions are only reading from that structure and are
already using const. While converting the code to use dev_priv instead
of dev, I noticed a few places where we can give that hint.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With 20+ module parameters, I think referring to them via a struct
improves clarity over just having a bunch of globals. While at it, move
the parameter initialization and definitions into a new file
i915_params.c to reduce clutter in i915_drv.c.

Apart from the ill-named i915_enable_rc6, i915_enable_fbc and
i915_enable_ppgtt parameters, for which we lose the "i915_" prefix
internally, the module parameters now look the same both on the kernel
command line and in code. For example, "i915.modeset".

The downsides of the change are losing static on a couple of variables
and not having the initialization and module_param_named() right next to
each other. On the other hand, all module parameters are now defined in
one place at i915_params.c. Plus you can do this to find all module
parameter references:

$ git grep "i915\." -- drivers/gpu/drm/i915

v2:
- move the definitions into a new file
- s/i915_params/i915/
- make i915_try_reset i915.reset, for consistency
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

WaMiSetContext_Hang tells us that a MI_NOOP must follow MI_SET_CONTEXT.

The other thing WaMiSetContext_Hang seems to say is that URB_FENCE isn't
allowed to straddle two cachelines. But we don't issue those from the
kernel so we don't care.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

WaApplyL3ControlAndL3ChickenMode is only listed for IVB and HSW in
W/A database and BSpec.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The w/a database lists both WaPsdDispatchEnable and
WaDisablePSDDualDispatchEnable for VLV. They appear to be the same
thing, so list both names.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Many times in the past we have concluded that the cause of the GPU hang
has been that the hw status page was stale, usually because the GPU and
CPU disagreed over the address of the page. Having stumbled across yet
another issue that seems to be related to the HWSP, it is time to
include that information in the GPU error dump.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Through a twisty and circuituous path it is possible to currently trick
the code into creating a default context and forgetting to pin it
immediately into the GGTT. (This requires a system using contexts without
an aliasing ppgtt, which is currently restricted to Baytrails machines
manually specifying a module parameter to force enable contexts, or
on Sandybridge and later that manually disable the aliasing ppgtt.) The
consequence is that during module unload we attempt to unpin the default
context twice and encounter a BUG remonstrating that we attempt to unpin
an unbound object.

[  161.002869] Kernel BUG at f84861f8 [verbose debug info unavailable]
[  161.002875] invalid opcode: 0000 [#1] SMP
[  161.002882] Modules linked in: coretemp kvm_intel kvm crc32_pclmul aesni_intel aes_i586 xts lrw gf128mul ablk_helper cryptd hid_sensor_accel_3d hid_sensor_gyro_3d hid_sensor_magn_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event dm_multipath scsi_dh asix ppdev usbnet snd_rawmidi mii hid_sensor_hub microcode snd_seq rfcomm bnep snd_seq_device bluetooth snd_timer snd parport_pc binfmt_misc soundcore dw_dmac_pci dw_dmac_core mac_hid lp parport dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915(O-) drm_kms_helper(O) igb dca ptp pps_core i2c_algo_bit drm(O) ahci libahci video
[  161.002991] CPU: 0 PID: 2114 Comm: rmmod Tainted: G        W  O 3.13.0-rc8+ #2
[  161.002997] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS 5.6.5 09/24/2013
[  161.003004] task: dbdd6800 ti: dbe0e000 task.ti: dbe0e000
[  161.003010] EIP: 0060:[<f84861f8>] EFLAGS: 00010246 CPU: 0
[  161.003044] EIP is at i915_gem_object_ggtt_unpin+0x88/0x90 [i915]
[  161.003050] EAX: dfce3840 EBX: 00000000 ECX: dfafd690 EDX: dfce3874
[  161.003056] ESI: c0086b40 EDI: df962e00 EBP: dbe0fe1c ESP: dbe0fe0c
[  161.003062]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[  161.003068] CR0: 8005003b CR2: b7718000 CR3: 1bec0000 CR4: 001007f0
[  161.003076] Stack:
[  161.003081]  00afc014 00000004 c0086b40 dfafc000 dbe0fe38 f8487e5a dfaa5400 c0086b40
[  161.003099]  dfafc000 dfaa5400 dfaa5414 dbe0fe58 f84741aa 00000000 f89c34b9 dfaa5414
[  161.003117]  dfaa5400 dfaa5400 f644b000 dbe0fe6c f89a5443 dfaa5400 f8505000 f644b000
[  161.003134] Call Trace:
[  161.003169]  [<f8487e5a>] i915_gem_context_fini+0xba/0x1c0 [i915]
[  161.003202]  [<f84741aa>] i915_driver_unload+0x1fa/0x2f0 [i915]
[  161.003232]  [<f89a5443>] drm_dev_unregister+0x23/0x90 [drm]
[  161.003259]  [<f89a54ed>] drm_put_dev+0x3d/0x70 [drm]
[  161.003294]  [<f8470615>] i915_pci_remove+0x15/0x20 [i915]
[  161.003306]  [<c1338a6f>] pci_device_remove+0x2f/0xa0
[  161.003317]  [<c140c871>] __device_release_driver+0x61/0xc0
[  161.003328]  [<c140d12f>] driver_detach+0x8f/0xa0
[  161.003341]  [<c140c54f>] bus_remove_driver+0x4f/0xc0
[  161.003353]  [<c140d708>] driver_unregister+0x28/0x60
[  161.003362]  [<c10cee42>] ? stop_cpus+0x32/0x40
[  161.003372]  [<c10bd510>] ? module_refcount+0x90/0x90
[  161.003383]  [<c13378c5>] pci_unregister_driver+0x15/0x60
[  161.003413]  [<f89a739f>] drm_pci_exit+0x9f/0xb0 [drm]
[  161.003458]  [<f84e624a>] i915_exit+0x1b/0x1d [i915]
[  161.003468]  [<c10bf8a8>] SyS_delete_module+0x158/0x1f0
[  161.003480]  [<c1173d5d>] ? ____fput+0xd/0x10
[  161.003488]  [<c106f0fe>] ? task_work_run+0x7e/0xb0
[  161.003499]  [<c165a68d>] sysenter_do_call+0x12/0x28
[  161.003505] Code: 0f b6 4d f3 8d 51 0f 83 e1 f0 83 e2 0f 09 d1 84 d2 88 48 54 75 07 80 a7 91 00 00 00 7f 83 c4 04 5b 5e 5f 5d c3 8d b6 00 00 00 00 <0f> 0b 8d b6 00 00 00 00 55 89 e5 57 56 53 83 ec 64 3e 8d 74 26
[  161.003586] EIP: [<f84861f8>] i915_gem_object_ggtt_unpin+0x88/0x90 [i915] SS:ESP 0068:dbe0fe0c

v2: Rename the local variable (is_default_ctx) to avoid confusion with
the function is_default_ctx(). And correct Jesse's email address.
Reported-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73985Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NBen Widawsky <benjamin.widawsky@intel.com>
[danvet: Fix up the rebase fail from my first attempt, thankfully
pointed out by Ville.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This debugfs interface will allow intel-gpu-tools test case
to verify if screen has been updated properly on cases like PSR.

v2: Accepted all Daniel's suggestions:
    * grab modeset lock
    * loop over connector and check DPMS on
    * return errors
    * use _eDP1 suffix for easy future extension
    * don't cache crc_supported neither latest crc
    * return crc as a full array and read it at once with aux.
    * use 0 to turn TEST_SINK off.
    * split the drm_helpers definitions in another patch.

v3: Accepted 2 Damien's suggestion: remove h from printf hexa
    and return ENODEV when eDP not present instead of EAGAIN.

v4: Accepted 2 Jani' s suggestion: 1 path for unlock and remove
    _retry from aux read.

v5: removing last missing useless _retry (by Damien)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This address will be used to verify panel CRC for test and
validation purposes.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Fix whitespace fail.]
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Having a 4 byte register at 0x321b seems unlikely as that's not
4 byte aligned. Since later platforms have more or less the same FBC
registers with new names, assume that FBC_FENCE_OFF is at 0x3218 just
like DPFC_FENCE_YOFF.

This feels like a simple typo in BSpec. 321Bh looks a lot like 3218h
after all.

Should still be tested on real hardware of course. But I don't have
any mobile gen4 systems.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The debug message telling FBC1 has been enabled is missing a newline.
Add it.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On CTG and IVB+ we don't try to preserve any bits from the
DPFC_CONTROL register. Follow suit on ILK/SNB.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We will anyway re-enable FBC normally after resume, so trying to save
and restore the register makes little sense.

We do need to preserve the FBC1 interval bits in FBC_CONTROL since
we only initialize them during driver load, and try to preserve them
after that.

v2: s/I915_HAS_FBC/HAS_FBC/ and fix the check for gen4
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We set up all the bits for DPFC_CONTROL but forgot to actually
write them to the register. Oops.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Make the FBC plane macros take the plane as a parameter.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The ILK/SNB docs don't really mention the the DPFC_HT_MODIFY bit.
CTG docs clearly state that it should be set only when tracking
back buffer modification in persistent mode. The bit is supposed
to be set by software after the first CPU modification to the
back buffer, and it would get automagically cleared by the hardware
on the next page flip.

Since we only track front buffer modification we don't need to set
this bit. GTT modification tracking still appears to work on ILK
and SNB with the bit unset. I don't have a CTG to verify how that
behaves.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The ILK/SNB docs are a bit unclear what the persistent mode does, but
the CTG docs clearly state that it was meant to be used when we're
tracking back buffer modifications. We never do that, so leave it in
non-persistent mode.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We use nuking instead of render tracking on IVB+, so there's
no point in writing IVB_FBC_RT_BASE.

v2: Drop the IVB_FBC_RT_BASE write too
v3: Move the SNB stuff elsewhere, leaving only IVB+ here
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Because whatever.*

* This should contain a fairly long list of issues and still
unresolved resgressions, but I didn't really get a vote.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I want to see these without having full debugs enabled.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: fix the gen8 irq handler as spotted by Paulo in his review.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we print all pipe underruns on GMCH platforms. Hook up the
same logic we use on PCH platforms where we disable the underrun
reporting after the first underrun.

Underruns don't actually generate interrupts themselves on GMCH
platforms, we just can detect them whenever we service other
interrupts. So we don't have any enable bits to worry about. We just
need to remember to clear the underrun status when enabling underrun
reporting.

Note that the underrun handling needs to be moved to the non-locked
pipe_stats[] loop in the interrupt handlers to avoid having to rework
the locking in intel_set_cpu_fifo_underrun_reporting().
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is useful for debugging as we then know that the first entry is
always the global GTT, and all later entries the per-process GTT VM.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Forgot to convert to using the refclk variable when I added refclk
readout support, and Paulo noticed the resulting calculation was off due
to the way p & r are stored.
Reported-by: NPaulo Zanoni <przanoni@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This statenment became false here:

commit 4fc688ce
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Fri Nov 2 11:14:01 2012 -0700

    drm/i915: protect RPS/RC6 related accesses (including PCU) with a new mutex
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that we have DDI support, we can check these all the time.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Read out and calculate the port and pixel clocks on DDI configs as well.
This means we have to grab the DP divider values and look at the port
mapping to figure out which clock select reg to read out.

v2: do the work from ddi_get_config (Ville)
v3: check WRPLL reference clock (Ville)
    add additional SPLL freqs (Ville)
    clean up port/crtc clock calc (Ville)
    fix up crtc_clock conditionals (Ville)
    drop superfluous dp_get_m_n from get_config (Ville)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need a bit more flexibility here in the future, bits get shuffled
around.

v2: more descriptive commit message (Jani Nikula)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So it's easier to compare what we program with the documentation, not
having to jump at all.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Also, move that computation outside of the for loop that tries 5 times,
this value doesn't change between tries.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A tiny clean-up to allow better code separation between platforms.

v2: Fix comment placement (put in in i9xx_get_aux_clock_divider()) and
    nuke the outdated PCH eDP comment (Jani Nikula)
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since
commit ee1452d7
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Fri Sep 20 15:05:30 2013 +0300

    drm/i915: assume all GM45 Acer laptops use inverted backlight PWM

failed and was later reverted in
commit be505f64
Author: Alexander van Heukelum <heukelum@fastmail.fm>
Date:   Sat Dec 28 21:00:39 2013 +0100

    Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM"

fix the individual broken machine instead.

Note to backporters:

http://patchwork.freedesktop.org/patch/17837/

is the patch you want for 3.13 and older.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54171
Reference: http://mid.gmane.org/DUB115-W7628C7C710EA51AA110CD4A5000@phx.gbl
CC: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Patch mangling for 3.14 plus adding the link to the original
for 3.13.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>