- 28 7月, 2010 1 次提交
-
-
由 Yehuda Sadeh 提交于
This fixes an issue triggered by running concurrent syncs. One of the syncs would go through while the other would just hang indefinitely. In any case, we never actually want to wake a single waiter, so the *_all functions should be used. Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 24 7月, 2010 1 次提交
-
-
由 Sage Weil 提交于
When we embed a dentry lease release notification in a request, invalidate our lease so we don't think we still have it. Otherwise we can get all sorts of incorrect client behavior when multiple clients are interacting with the same part of the namespace. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 30 6月, 2010 2 次提交
-
-
由 Sage Weil 提交于
We need to increase the total and used counters when allocating a new cap in the non-reserved (cap import) case. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
We can drop caps with an mds request. Ensure we only drop unused AND clean caps, since the MDS doesn't support cap writeback in that context, nor do we track it. If caps are dirty, and the MDS needs them back, we it will revoke and we will flush in the normal fashion. This fixes a possibly loss of metadata. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 11 6月, 2010 3 次提交
-
-
由 Sage Weil 提交于
If we have enough memory to allocate a new cap release message, do so, so that we can send a partial release message immediately. This keeps us from making the MDS wait when the cap release it needs is in a partially full release message. If we fail because of ENOMEM, oh well, they'll just have to wait a bit longer. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
If we get an IMPORT that give us a cap, but we don't have the inode, queue a release (and try to send it immediately) so that the MDS doesn't get stuck waiting for us. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Nothing is released here: the caps message is simply ignored in this case. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 28 5月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 18 5月, 2010 5 次提交
-
-
由 Yehuda Sadeh 提交于
This is essential, as for the rados block device we'll need to run in different contexts that would need flags that are other than GFP_NOFS. Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Dan Carpenter 提交于
We don't ever use "dirty" so we can remove it. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
We only need to pass in front_len. Callers can attach any other payload pieces (middle, data) as they see fit. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure instead, and fix up the callers (about half of which were wrong anyway). Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Cheng Renquan 提交于
ceph_sb_to_client and ceph_client are really identical, we need to dump one; while function ceph_client is confusing with "struct ceph_client", ceph_sb_to_client's definition is more clear; so we'd better switch all call to ceph_sb_to_client. -static inline struct ceph_client *ceph_client(struct super_block *sb) -{ - return sb->s_fs_info; -} Signed-off-by: NCheng Renquan <crquan@gmail.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 12 5月, 2010 1 次提交
-
-
由 Sage Weil 提交于
The iterate_session_caps helper traverses the session caps list and tries to grab an inode reference. However, the __ceph_remove_cap was clearing the inode backpointer _before_ removing itself from the session list, causing a null pointer dereference. Clear cap->ci under protection of s_cap_lock to avoid the race, and to tightly couple the list and backpointer state. Use a local flag to indicate whether we are releasing the cap, as cap->session may be modified by a racing thread in iterate_session_caps. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 04 5月, 2010 1 次提交
-
-
由 Sage Weil 提交于
Signed-off-by: NSage Weil <sage@newdream.net>
-
- 02 4月, 2010 1 次提交
-
-
由 Sage Weil 提交于
We create a ceph_cap_snap if there is dirty cap metadata (for writeback to mds) OR dirty pages (for writeback to osd). It is thus possible that the metadata has been written back to the MDS but the OSD data has not when the cap_snap is created. This results in a cap_snap with dirty(caps) == 0. The problem is that cap writeback to the MDS isn't necessary, and a FLUSHSNAP cap op gets no ack from the MDS. This leaves the cap_snap attached to the inode along with its inode reference. Fix the problem by dropping the cap_snap if it becomes 'complete' (all pages written out) and dirty(caps) == 0 in ceph_put_wrbuffer_cap_refs(). Also, BUG() in __ceph_flush_snaps() if we encounter a cap_snap with dirty(caps) == 0. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 23 3月, 2010 4 次提交
-
-
由 Sage Weil 提交于
We were releasing used caps (e.g. FILE_CACHE) from encode_inode_release with MDS requests (e.g. setattr). We don't carry refs on most caps, so this code worked most of the time, but for setattr (utimes) we try to drop Fscr. This causes cap state to get slightly out of sync with reality, and may result in subsequent mds revoke messages getting ignored. Fix by only releasing unused caps. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Drop session mutex unconditionally in handle_cap_grant, and do the check_caps from the handle_cap_grant helper. This avoids using a magic return value. Also avoid using a flag variable in the IMPORT case and call check_caps at the appropriate point. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Passing a session pointer to ceph_check_caps() used to mean it would leave the session mutex locked. That wasn't always possible if it wasn't passed CHECK_CAPS_AUTHONLY. If could unlock the passed session and lock a differet session mutex, which was clearly wrong, and also emitted a warning when it a racing CPU retook it and we did an unlock from the wrong context. This was only a problem when there was more than one MDS. First, make ceph_check_caps unconditionally drop the session mutex, so that it is free to lock other sessions as needed. Then adjust the one caller that passes in a session (handle_cap_grant) accordingly. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
If we don't have the exported cap it's because we already released it. No need to WARN. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 21 3月, 2010 1 次提交
-
-
由 Sage Weil 提交于
Added assertion, and cleared one case where the implemented caps were not following the issued caps. Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 06 3月, 2010 1 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 02 3月, 2010 4 次提交
-
-
由 Sage Weil 提交于
The flush_dirty_caps() used to loop over the first entry of the cap_dirty dirty list on the assumption that after calling ceph_check_caps() it would be removed from the list. This isn't true for caps that are being migrated between MDSs, where we've received the EXPORT but not the IMPORT. Instead, do a safe list iteration, and pin the next inode on the list via the CEPH_I_NOFLUSH flag. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
We should include caps that are mid-migration (we've received the EXPORT, but not the IMPORT) in the issued caps set. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Verify the file is actually open for the given caps when we are waiting for caps. This ensures we will wake up and return EBADF if another thread closes the file out from under us. Note that EBADF is also the correct return code from write(2) when called on a file handle opened for reading (although the vfs should catch that). Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
This was simply broken. Apparently at some point we thought about putting the snaptrace in the middle section, but didn't. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 24 2月, 2010 2 次提交
-
-
由 Sage Weil 提交于
Verify the mds session is currently registered before handling incoming messages. Clean up message handlers to pull mds out of session->s_mds instead of less trustworthy src field. Clean up con_{get,put} debug output. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
The destroy_inode path needs no inode locks since there are no inode references. Update __ceph_remove_cap comment to reflect that it is called without cap->session->s_mutex in this case. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 20 2月, 2010 2 次提交
-
-
由 Yehuda Sadeh 提交于
There is no state in local vars that requires us to loop after temporarily dropping i_lock. Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
We need to know whether there was any page left behind, and not the return value (the total number of pages invalidated). Look at the mapping to see if we were successful or not. Move it all into a helper to simplify the two callers. Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 18 2月, 2010 2 次提交
-
-
由 Sage Weil 提交于
We need to be able to iterate over all caps on a session with a possibly slow callback on each cap. To allow this, we used to prevent cap reordering while we were iterating. However, we were not safe from races with removal: removing the 'next' cap would make the next pointer from list_for_each_entry_safe be invalid, and cause a lock up or similar badness. Instead, we keep an iterator pointer in the session pointing to the current cap. As before, we avoid reordering. For removal, if the cap isn't the current cap we are iterating over, we are fine. If it is, we clear cap->ci (to mark the cap as pending removal) but leave it in the session list. In iterate_caps, we can safely finish removal and get the next cap pointer. While we're at it, clean up put_cap to not take a cap reservation context, as it was never used. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Use a global counter for the minimum number of allocated caps instead of hard coding a check against readdir_max. This takes into account multiple client instances, and avoids examining the superblock mount options when a cap is dropped. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 12 2月, 2010 5 次提交
-
-
由 Sage Weil 提交于
We were invalidating mapping pages when dropping FILE_CACHE in __send_cap(). But ceph_check_caps attempts to invalidate already, and also checks for success, so we should never get to this point. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
There is no reason not to invalidate pages when a truncate is pending. Both throw out page cache pages. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Grab inode ref in helper. Make work functions static, with consistent naming. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Never retain caps in __send_cap() that are being revoked. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Try to invalidate pages in ceph_check_caps() if FILE_CACHE is being revoked. If we fail, queue an immediate async invalidate if FILE_CACHE is being revoked. (If it's not being revoked, we just queue the caps for later evaluation later, as per the old behavior.) Signed-off-by: NSage Weil <sage@newdream.net>
-
- 24 12月, 2009 2 次提交
-
-
由 Sage Weil 提交于
Many (most?) message types include a transaction id. By including it in the fixed size header, we always have it available even when we are unable to allocate memory for the (larger, variable sized) message body. This will allow us to error out the appropriate request instead of (silently) dropping the reply. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Avoid confusing iterate_session_caps(), flag the session while we are iterating so that __touch_cap does not rearrange items on the list. All other modifiers of session->s_caps do so under the protection of s_mutex. Signed-off-by: NSage Weil <sage@newdream.net>
-