Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 17 11月, 2011 5 次提交
  3. 16 11月, 2011 2 次提交
  5. 15 11月, 2011 8 次提交
    • R
      ipv4: fix a memory leak in ic_bootp_send_if · ad79eefc
      由 RongQing.Li 提交于 
      when dev_hard_header() failed, the newly allocated skb should be freed.
Signed-off-by: NRongQing.Li <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ad79eefc
    • D
      bnx2x: add endline at end of message · 5219e4c9
      由 Dmitry Kravkov 提交于 
      Reported-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5219e4c9
    • M
      IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag · 4a287eba
      由 Matti Vaittinen 提交于 
      The support for NLM_F_* flags at IPv6 routing requests.

If NLM_F_CREATE flag is not defined for RTM_NEWROUTE request,
warning is printed, but no error is returned. Instead new route is
added. Later NLM_F_CREATE may be required for
new route creation.

Exception is when NLM_F_REPLACE flag is given without NLM_F_CREATE, and
no matching route is found. In this case it should be safe to assume
that the request issuer is familiar with NLM_F_* flags, and does really
not want route to be created.

Specifying NLM_F_REPLACE flag will now make the kernel to search for
matching route, and replace it with new one. If no route is found and
NLM_F_CREATE is specified as well, then new route is created.

Also, specifying NLM_F_EXCL will yield returning of error if matching
route is found.

Patch created against linux-3.2-rc1
Signed-off-by: NMatti Vaittinen <Mazziesaccount@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4a287eba
    • M
      IPv6 routing, NLM_F_* flag support: warn if new route is created without NLM_F_CREATE · d71314b4
      由 Matti Vaittinen 提交于 
      The support for NLM_F_* flags at IPv6 routing requests.

Warn if NLM_F_CREATE flag is not defined for RTM_NEWROUTE request,
creating new table. Later NLM_F_CREATE may be required for
new route creation.

Patch created against linux-3.2-rc1
Signed-off-by: NMatti Vaittinen <Mazziesaccount@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d71314b4
    • W
      net/can/mscan: Fix buggy listen only mode setting · abbd00b8
      由 Wolfgang Grandegger 提交于 
      This patch fixes an issue introduced recently with commit
452448f9.

CC: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      abbd00b8
    • R
      Sweep the last of the active .get_drvinfo floors under ethernet/ · 612a94d6
      由 Rick Jones 提交于 
      This round of floor sweeping converts strncpy calls in various .get_drvinfo
routines to the preferred strlcpy.  It also does a modicum of other
cleaning in those routines.
Signed-off-by: NRick Jones <rick.jones2@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      612a94d6
    • E
      bnx2x: uses build_skb() in receive path · e52fcb24
      由 Eric Dumazet 提交于 
      bnx2x uses following formula to compute its rx_buf_sz :

dev->mtu + 2*L1_CACHE_BYTES + 14 + 8 + 8 + 2

Then core network adds NET_SKB_PAD and SKB_DATA_ALIGN(sizeof(struct
skb_shared_info))

Final allocated size for skb head on x86_64 (L1_CACHE_BYTES = 64,
MTU=1500) : 2112 bytes : SLUB/SLAB round this to 4096 bytes.

Since skb truesize is then bigger than SK_MEM_QUANTUM, we have lot of
false sharing because of mem_reclaim in UDP stack.

One possible way to half truesize is to reduce the need by 64 bytes
(2112 -> 2048 bytes)

Instead of allocating a full cache line at the end of packet for
alignment, we can use the fact that skb_shared_info sits at the end of
skb->head, and we can use this room, if we convert bnx2x to new
build_skb() infrastructure.

skb_shared_info will be initialized after hardware finished its
transfert, so we can eventually overwrite the final padding.

Using build_skb() also reduces cache line misses in the driver, since we
use cache hot skb instead of cold ones. Number of in-flight sk_buff
structures is lower, they are recycled while still hot.

Performance results :

(820.000 pps on a rx UDP monothread benchmark, instead of 720.000 pps)
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Eilon Greenstein <eilong@broadcom.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Tom Herbert <therbert@google.com>
CC: Jamal Hadi Salim <hadi@mojatatu.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Thomas Graf <tgraf@infradead.org>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e52fcb24
    • E
      net: introduce build_skb() · b2b5ce9d
      由 Eric Dumazet 提交于 
      One of the thing we discussed during netdev 2011 conference was the idea
to change some network drivers to allocate/populate their skb at RX
completion time, right before feeding the skb to network stack.

In old days, we allocated skbs when populating the RX ring.

This means bringing into cpu cache sk_buff and skb_shared_info cache
lines (since we clear/initialize them), then 'queue' skb->data to NIC.

By the time NIC fills a frame in skb->data buffer and host can process
it, cpu probably threw away the cache lines from its caches, because lot
of things happened between the allocation and final use.

So the deal would be to allocate only the data buffer for the NIC to
populate its RX ring buffer. And use build_skb() at RX completion to
attach a data buffer (now filled with an ethernet frame) to a new skb,
initialize the skb_shared_info portion, and give the hot skb to network
stack.

build_skb() is the function to allocate an skb, caller providing the
data buffer that should be attached to it. Drivers are expected to call
skb_reserve() right after build_skb() to adjust skb->data to the
Ethernet frame (usually skipping NET_SKB_PAD and NET_IP_ALIGN, but some
drivers might add a hardware provided alignment)

Data provided to build_skb() MUST have been allocated by a prior
kmalloc() call, with enough room to add SKB_DATA_ALIGN(sizeof(struct
skb_shared_info)) bytes at the end of the data without corrupting
incoming frame.

data = kmalloc(NET_SKB_PAD + NET_IP_ALIGN + 1536 +
               SKB_DATA_ALIGN(sizeof(struct skb_shared_info)),
	       GFP_ATOMIC);
...
skb = build_skb(data);
if (!skb) {
	recycle_data(data);
} else {
	skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
	...
}
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Eilon Greenstein <eilong@broadcom.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Tom Herbert <therbert@google.com>
CC: Jamal Hadi Salim <hadi@mojatatu.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Thomas Graf <tgraf@infradead.org>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b2b5ce9d
  7. 14 11月, 2011 25 次提交