Add iomux, clocks,  and memory map for Freescale's MX53 SoC.
Add cpu_is_mx53 function to common.h.
Add 3 more banks of gpio's to mxc_gpio_ports.
Add MX53 phys offset address.
Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Now only the virtual addresses [0xf4000000, 0xf5ffffff] are used for
static per-SoC mappings.  The few mappings of whole chip selects are
moved accordingly.

The now wrong defines for virtual base addresses are removed.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes less code rely on the virtual constants.

To further simplify code and reduce the needed boilerplate when
defining the static mappings a new helper macro is defined in
mach/hardware.h.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes it more assembler friendly and allows it to be used in situation
that need an unsigned long and not a pointer.  Also the naming is
clearer.  IOMEM is introduced without IMX_ prefix as it is used this way
in more than one ARM subarch and it might become globally available
soon.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Prepare for i.MX5 SoC code by adding the relevant macros to common plat-mxc
code.
Signed-off-by: NAmit Kucheria <amit.kucheria@canonical.com>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Dmitriy Taychenachev <dimichxp@gmail.com>

Signed-off-by: NDmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This patch moves the stuff common to i.MX31 and i.MX35 to mx3x.h and the
specifics to mx31.h/mx35.h. We can build a kernel which runs on i.MX31 and
i.MX35, so always include mx31.h and mx35.h
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

* define new CONFIG_ARCH_MX21 (this one is currently mutually exclusive to
  CONFIG_ARCH_MX27, but this might change)
* splits one header file. Memory definitions, interrupt sources,
  DMA channels are split into common part, i.MX27 specific and i.MX21
  specific.
* guard access to UART5/UART6, which don't exist on i.MX21
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Adds MX1 architecture to platform MXC. It will supersede mach-imx
and let it die.
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: NDarius Augulis <augulis.darius@gmail.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add basic i.MX27 CPU support
Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>

This patch adds basic mach support for the mx2 processor family, based
on the original freescale code and adapted to mainline kernel coding
style.
Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>

do not include board-mx31ads.h from hardware.h, instead include it
directly only where needed.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

From: Juergen Beisert <j.beisert@pengutronix.de>

This patch separates the current code into i.MX2 and i.MX3 and modifies
the Kconfig files to reflect this separation in the menus.

Things happend since last review:
 - make i.MX3 compile again
 - fix some structure names to be conform with all the shared/common
   sources from i.MX1/i.MX2

Previous changes:
 - stay conform to other Kconfig files (note from Russell King)
Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

From: Juergen Beisert <j.beisert@pengutronix.de>

Clean up current header files from doxygen style comments. There are
probably more such comments left, but we start with these.

Things happend since last review:
 - needless blank lines removed (note by Russell King)
 - re-format comments (note by Ross Wille)
Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: NRoss Wille <wille@freescale.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds the foundation pieces for
the Freescale MXC platforms, including
i.MX2 and i.MX3 based systems.

The bare-bones MX31 support in this patch
boots to the rootdev panic with 8250 serial
console configured "console=ttyS0,115200".
It assumes that Redboot is the boot loader.
Signed-off-by: NQuinn Jensen <quinn.jensen@freescale.com>
Acked-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>