- 23 5月, 2011 8 次提交
-
-
由 Magnus Damm 提交于
Add Runtime PM support to the CMT driver. The hardware device is enabled as long as the clocksource or the clockevent portion of the driver is used. Signed-off-by: NMagnus Damm <damm@opensource.se> Acked-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch updates the clocksource part of the CMT driver to make use of the __clocksource_updatefreq_hz() function. Without this patch the old code uses clocksource_register() together with a hack that assumes a never changing clock rate (see clk_enable(), clk_get_rate() and clk_disable()). The patch uses clocksource_register_hz() with 1 Hz as initial value, then lets the ->enable() callback update the value with __clocksource_updatefreq_hz() once the struct clk has been enabled and the frequency is stable. Signed-off-by: NMagnus Damm <damm@opensource.se> Acked-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
List elements, deleted using list_del_rcu(), cannot be freed without synchronising RCU. Further, the spinlock, used to protect the RCU writer, is called in process context, so, we don't have to save flags. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
This patch extends and fixes runtime power management in the shdma driver to support powering down the DMA controller and adds support for system-level suspend and resume. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Close multiple theoretical races, especially the one in .device_free_chan_resources(). Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Fix sh7377 and sh73a0 build failure: drivers/tty/serial/sh-sci.c: In function 'scif_txfill': drivers/tty/serial/sh-sci.c:338: error: implicit declaration of function 'sci_SCTFDR_in' drivers/tty/serial/sh-sci.c: In function 'scif_rxfill': drivers/tty/serial/sh-sci.c:351: error: implicit declaration of function 'sci_SCRFDR_in' make[3]: *** [drivers/tty/serial/sh-sci.o] Error 1 make[2]: *** [drivers/tty/serial] Error 2 make[1]: *** [drivers/tty] Error 2 make: *** [drivers] Error 2 Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds wakeup support to the sh-sci driver. The serial core deals with all details but defaults to wakeup disabled. So to make use of this feature enable wakeup in sysfs: echo enabled > /sys/class/tty/ttySC0/power/wakeup Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Add support for Runtime PM in the sh-sci driver. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 21 5月, 2011 3 次提交
-
-
由 Linus Torvalds 提交于
Commit e66eed65 ("list: remove prefetching from regular list iterators") removed the include of prefetch.h from list.h, which uncovered several cases that had apparently relied on that rather obscure header file dependency. So this fixes things up a bit, using grep -L linux/prefetch.h $(git grep -l '[^a-z_]prefetchw*(' -- '*.[ch]') grep -L 'prefetchw*(' $(git grep -l 'linux/prefetch.h' -- '*.[ch]') to guide us in finding files that either need <linux/prefetch.h> inclusion, or have it despite not needing it. There are more of them around (mostly network drivers), but this gets many core ones. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Dumazet 提交于
commit a35e2c1b (macvlan: use rx_handler_data pointer to store macvlan_port pointer V2) added a bug in macvlan_port_create() Steps to reproduce the bug: # ifenslave bond0 eth0 eth1 # ip link add link eth0 up name eth0#1 type macvlan ->error EBUSY # ip link add link eth0 up name eth0#1 type macvlan ->panic Fix: Dont set IFF_MACVLAN_PORT in error case. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Luck, Tony 提交于
Geert Uytterhoeven ran a dependency checker which kicked out this warning: + warning: (ACPI_APEI) selects PSTORE which has unmet direct dependencies (MISC_FILESYSTEMS): => N/A Randy confirmed that the fix was to "select MISC_FILESYSTEMS" too. Tested-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 20 5月, 2011 29 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This was left as a sysdev, breaking the build Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Matt Carlson 提交于
Commit dabc5c67, entitled "tg3: Move TSO_CAPABLE assignment", moved some TSO flagging code around. In the process it failed to add braces around an exceptional 5906 condition. This patch fixes the problem. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Mahesh Bandewar noticed that the features cleanup in commit 0da0606f, entitled "tg3: Consolidate all netdev feature assignments", mistakenly sets NETIF_F_LOOPBACK by default. This patch corrects the error. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMahesh Bandewar <maheshb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When one macvlan device is dismantled, we can avoid one synchronize_rcu() call done after deletion from hash list, since caller will perform a synchronize_net() call after its ndo_stop() call. Add a new netdev->dismantle field to signal this dismantle intent. Reduces RTNL hold time. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Patrick McHardy <kaber@trash.net> CC: Ben Greear <greearb@candelatech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kristen Carlson Accardi 提交于
Give users the option of completely powering off unoccupied SATA ports using the existing min_power link_power_management_policy option. When the use selects this option on an empty port, we will power the port off by setting DET to off. For occupied ports, behavior is unchanged. Signed-off-by: NKristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Pavel Herrmann 提交于
Some errors still show up, but the dock works, both drives can be accessed at the same time The chip maker and designation is unknown - possibly jmicron JMB350? Signed-off-by: NPavel Herrmann <morpheus.ibis@gmail.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Mikulas Patocka 提交于
Don't powerdown Compaq Triflex IDE device on suspend This fixes APM suspend on Compaq Armada 7400. APM BIOS doesn't suspend if IDE is powered down when suspending. The Triflex controller is found only on old Compaq boards, so this patch will hopefully have no side effects. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Martin K. Petersen 提交于
Previously we used Maximum Unmap LBA Count in the Block Limits VPD to signal the maximum number of sectors we could handle in a single Write Same command. Starting with SBC3r26 the Block Limits VPD has an explicit limit on the number of blocks in a Write Same. This means we can stop abusing a field related to the Unmap command and let our SAT use the proper value in the VPD (Maximum Write Same Length). Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com> Cc: stable@kernel.org
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Dave Jones 提交于
Signed-off-by: NDave Jones <davej@redhat.com>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
I was investigating some warnings that spew because of the _DEBUG_FOO ifdef'ery in here. Instead of adding more ifdefs to fix that warning, let's use pr_debug() and get rid of these CPP checks altogether. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch updates the tg3 version to 3.119. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Commit 4d958473, entitled "tg3: Workaround rx_discards stat bug", was intended to be applied to the 5717, 5718, 5719_A0, and 5720 A0 chip revisions. The implementation missed the latter two when applying the fix in a critical area. This patch fixes the problem. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch removes some excessive parenthesizing. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch consolidates all the netdev feature bit assignments to one location. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch moves the code that asserts the TSO_CAPABLE flag closer to where the TSO capabilities flags are set. There isn't a good enough reason for the code to be separated. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Commit 4d958473, entitled "tg3: Workaround rx_discards stat bug" modified the hardware statistics data structure. The modification shifted the statistics so that the labels no longer corresponded to the counter values. This patch fixes the problem by utilizing reserved space for the new counters. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Commit bb158d69, entitled "tg3: Add TSO loopback test", mistakenly inverted the checksum field test from the receive BD. This patch corrects the problem. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Autonegotiation setup has gotten a little more complicated since the tg3 driver was created. This patch consolidates autoneg setup into one routine and modifies the call sites accordingly. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Commit 21a00ab2, entitled "tg3: Fix EEE interoperability issue", added an EEE interoperability fix. We found that the fix doesn't work if applied too early though. This patch delays the fix until right before allowing LPI assertion. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Commit 4d163b75, entitled "tg3: Fix 5719 A0 tx completion bug" turned off TSO to fix a hardware bug. In doing so, it accidentally turned off all IPv6 TCP checksum offloading too. This patch fixes the problem by reenabling the hardware bit that control both features. The TSO capability is still not exposed to the kernel. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The PCIe max FTS limit is too aggressive on these chips. This patch loosens the limit a little to eliminate data corruption issues. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch consolidates the skb cleanup code into a function named tg3_skb_error_unmap(). The modification addresses a long-standing bug where pci_unmap_single() was incorrectly being called instead of pci_unmap_page() in tigon3_dma_hwbug_workaround(). Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
It has been recently discovered that all tg3 devices have a 4Gb boundary DMA problem, and that all 5755 and newer devices can't handle fragments less than or equal to 8 bytes in size. This patch adjusts the flags and removes tg3_start_xmit(). tg3_start_xmit_dma_bug() has been renamed to tg3_start_xmit(). Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
Up and down movements were reversed, left and right buttons were swapped. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Michael Schmitz 提交于
Atarimouse fails to load as a module (with ENODEV), due to a brown paper bag bug, misinterpreting the semantics of atari_keyb_init(). [geert] Propagate the return value of atari_keyb_init() everywhere Signed-off-by: NMichael Schmitz <schmitz@debian.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Michael Schmitz 提交于
The Atari keyboard driver calls atari_mouse_interrupt_hook if it's set, not atari_input_mouse_interrupt_hook. Fix below. [geert] Killed off atari_mouse_interrupt_hook completely, after fixing another incorrect assignment in atarimouse.c. Signed-off-by: NMichael Schmitz <schmitz@debian.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-