1. 31 7月, 2006 1 次提交
  2. 07 7月, 2006 2 次提交
  3. 03 7月, 2006 2 次提交
    • B
      [POWERPC] Add new interrupt mapping core and change platforms to use it · 0ebfff14
      Benjamin Herrenschmidt 提交于
      This adds the new irq remapper core and removes the old one.  Because
      there are some fundamental conflicts with the old code, like the value
      of NO_IRQ which I'm now setting to 0 (as per discussions with Linus),
      etc..., this commit also changes the relevant platform and driver code
      over to use the new remapper (so as not to cause difficulties later
      in bisecting).
      
      This patch removes the old pre-parsing of the open firmware interrupt
      tree along with all the bogus assumptions it made to try to renumber
      interrupts according to the platform. This is all to be handled by the
      new code now.
      
      For the pSeries XICS interrupt controller, a single remapper host is
      created for the whole machine regardless of how many interrupt
      presentation and source controllers are found, and it's set to match
      any device node that isn't a 8259.  That works fine on pSeries and
      avoids having to deal with some of the complexities of split source
      controllers vs. presentation controllers in the pSeries device trees.
      
      The powerpc i8259 PIC driver now always requests the legacy interrupt
      range. It also has the feature of being able to match any device node
      (including NULL) if passed no device node as an input. That will help
      porting over platforms with broken device-trees like Pegasos who don't
      have a proper interrupt tree.
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: NPaul Mackerras <paulus@samba.org>
      0ebfff14
    • T
      [PATCH] irq-flags: misc drivers: Use the new IRQF_ constants · dace1453
      Thomas Gleixner 提交于
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      dace1453
  4. 02 7月, 2006 1 次提交
  5. 01 7月, 2006 2 次提交
  6. 28 6月, 2006 3 次提交
  7. 27 6月, 2006 2 次提交
  8. 26 6月, 2006 3 次提交
  9. 23 6月, 2006 1 次提交
  10. 11 6月, 2006 1 次提交
  11. 21 4月, 2006 1 次提交
  12. 28 3月, 2006 2 次提交
    • B
      [PATCH] powerpc: Kill _machine and hard-coded platform numbers · e8222502
      Benjamin Herrenschmidt 提交于
      This removes statically assigned platform numbers and reworks the
      powerpc platform probe code to use a better mechanism.  With this,
      board support files can simply declare a new machine type with a
      macro, and implement a probe() function that uses the flattened
      device-tree to detect if they apply for a given machine.
      
      We now have a machine_is() macro that replaces the comparisons of
      _machine with the various PLATFORM_* constants.  This commit also
      changes various drivers to use the new macro instead of looking at
      _machine.
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: NPaul Mackerras <paulus@samba.org>
      e8222502
    • A
      [PATCH] Notifier chain update: API changes · e041c683
      Alan Stern 提交于
      The kernel's implementation of notifier chains is unsafe.  There is no
      protection against entries being added to or removed from a chain while the
      chain is in use.  The issues were discussed in this thread:
      
          http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2
      
      We noticed that notifier chains in the kernel fall into two basic usage
      classes:
      
      	"Blocking" chains are always called from a process context
      	and the callout routines are allowed to sleep;
      
      	"Atomic" chains can be called from an atomic context and
      	the callout routines are not allowed to sleep.
      
      We decided to codify this distinction and make it part of the API.  Therefore
      this set of patches introduces three new, parallel APIs: one for blocking
      notifiers, one for atomic notifiers, and one for "raw" notifiers (which is
      really just the old API under a new name).  New kinds of data structures are
      used for the heads of the chains, and new routines are defined for
      registration, unregistration, and calling a chain.  The three APIs are
      explained in include/linux/notifier.h and their implementation is in
      kernel/sys.c.
      
      With atomic and blocking chains, the implementation guarantees that the chain
      links will not be corrupted and that chain callers will not get messed up by
      entries being added or removed.  For raw chains the implementation provides no
      guarantees at all; users of this API must provide their own protections.  (The
      idea was that situations may come up where the assumptions of the atomic and
      blocking APIs are not appropriate, so it should be possible for users to
      handle these things in their own way.)
      
      There are some limitations, which should not be too hard to live with.  For
      atomic/blocking chains, registration and unregistration must always be done in
      a process context since the chain is protected by a mutex/rwsem.  Also, a
      callout routine for a non-raw chain must not try to register or unregister
      entries on its own chain.  (This did happen in a couple of places and the code
      had to be changed to avoid it.)
      
      Since atomic chains may be called from within an NMI handler, they cannot use
      spinlocks for synchronization.  Instead we use RCU.  The overhead falls almost
      entirely in the unregister routine, which is okay since unregistration is much
      less frequent that calling a chain.
      
      Here is the list of chains that we adjusted and their classifications.  None
      of them use the raw API, so for the moment it is only a placeholder.
      
        ATOMIC CHAINS
        -------------
      arch/i386/kernel/traps.c:		i386die_chain
      arch/ia64/kernel/traps.c:		ia64die_chain
      arch/powerpc/kernel/traps.c:		powerpc_die_chain
      arch/sparc64/kernel/traps.c:		sparc64die_chain
      arch/x86_64/kernel/traps.c:		die_chain
      drivers/char/ipmi/ipmi_si_intf.c:	xaction_notifier_list
      kernel/panic.c:				panic_notifier_list
      kernel/profile.c:			task_free_notifier
      net/bluetooth/hci_core.c:		hci_notifier
      net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_chain
      net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_expect_chain
      net/ipv6/addrconf.c:			inet6addr_chain
      net/netfilter/nf_conntrack_core.c:	nf_conntrack_chain
      net/netfilter/nf_conntrack_core.c:	nf_conntrack_expect_chain
      net/netlink/af_netlink.c:		netlink_chain
      
        BLOCKING CHAINS
        ---------------
      arch/powerpc/platforms/pseries/reconfig.c:	pSeries_reconfig_chain
      arch/s390/kernel/process.c:		idle_chain
      arch/x86_64/kernel/process.c		idle_notifier
      drivers/base/memory.c:			memory_chain
      drivers/cpufreq/cpufreq.c		cpufreq_policy_notifier_list
      drivers/cpufreq/cpufreq.c		cpufreq_transition_notifier_list
      drivers/macintosh/adb.c:		adb_client_list
      drivers/macintosh/via-pmu.c		sleep_notifier_list
      drivers/macintosh/via-pmu68k.c		sleep_notifier_list
      drivers/macintosh/windfarm_core.c	wf_client_list
      drivers/usb/core/notify.c		usb_notifier_list
      drivers/video/fbmem.c			fb_notifier_list
      kernel/cpu.c				cpu_chain
      kernel/module.c				module_notify_list
      kernel/profile.c			munmap_notifier
      kernel/profile.c			task_exit_notifier
      kernel/sys.c				reboot_notifier_list
      net/core/dev.c				netdev_chain
      net/decnet/dn_dev.c:			dnaddr_chain
      net/ipv4/devinet.c:			inetaddr_chain
      
      It's possible that some of these classifications are wrong.  If they are,
      please let us know or submit a patch to fix them.  Note that any chain that
      gets called very frequently should be atomic, because the rwsem read-locking
      used for blocking chains is very likely to incur cache misses on SMP systems.
      (However, if the chain's callout routines may sleep then the chain cannot be
      atomic.)
      
      The patch set was written by Alan Stern and Chandra Seetharaman, incorporating
      material written by Keith Owens and suggestions from Paul McKenney and Andrew
      Morton.
      
      [jes@sgi.com: restructure the notifier chain initialization macros]
      Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
      Signed-off-by: NJes Sorensen <jes@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      e041c683
  13. 27 3月, 2006 1 次提交
  14. 23 3月, 2006 5 次提交
  15. 14 3月, 2006 1 次提交
  16. 07 3月, 2006 1 次提交
  17. 03 3月, 2006 2 次提交
  18. 18 2月, 2006 1 次提交
  19. 08 2月, 2006 2 次提交
  20. 02 2月, 2006 1 次提交
  21. 20 1月, 2006 1 次提交
  22. 14 1月, 2006 2 次提交
  23. 13 1月, 2006 2 次提交