- 29 7月, 2008 1 次提交
-
-
由 Paul Mundt 提交于
This follows the sparc changes a439fe51. Most of the moving about was done with Sam's directions at: http://marc.info/?l=linux-sh&m=121724823706062&w=2 with subsequent hacking and fixups entirely my fault. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 28 7月, 2008 9 次提交
-
-
由 Yoshihiro Shimoda 提交于
fix the problem that cannot boot using uImage when PAGE_SIZE is 8kbyte or 64kbyte. Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Adrian Bunk 提交于
Commit 1ea0704e (mm: add a ptep_modify_prot transaction abstraction) triggered on sh build errors like the following: <-- snip --> ... CC arch/sh/mm/pg-sh4.o cc1: warnings being treated as errors include2/asm/pgtable.h:139: error: 'ptep_get_and_clear' declared inline after being called include2/asm/pgtable.h:139: error: previous declaration of 'ptep_get_and_clear' was here make[2]: *** [arch/sh/mm/pg-sh4.o] Error 1 <-- snip --> Since there's no good reason for marking these global functions as "inline" this patch therefore removes the inline's. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds physically contiguous memory chunks to the UIO devices. The same strategy can be used in the future for the CEU as well. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Remove inline from ptep_get_and_clean() to match with header file prototype. Makes linux-next build. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart Menefy 提交于
The current kernel behaviour is to reenable interrupts unconditionally when taking a page fault. This patch changes this to only enable them if interrupts were previously enabled. It also fixes a problem seen with this fix in place: the kernel previously flushed the vsyscall page when handling a signal, which is not only unncessary, but caused a possible sleep with interrupts disabled. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Chris Smith 提交于
Add implementation of flush_icache_range() suitable for signal handler and kprobes. Remove flush_cache_sigtramp() and change signal.c to use flush_icache_range(). Signed-off-by: NChris Smith <chris.smith@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
16kB is a useful size on nommu, while 64kB still tends to be too big to be useful. Newer MMUs are likely to support this as well, so plug it in in anticipation of those, too. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
PAGE_SIZE doesn't need to be fixed at 4096 on nommu, so stub in a !MMU case for the various PAGE_SIZE Kconfig options. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Li Zefan 提交于
When using single_open(), single_release() should be used instead of seq_release(), otherwise there is a memory leak. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 27 7月, 2008 2 次提交
-
-
由 Johannes Weiner 提交于
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free pages, printed by show_free_areas() - pages in slab, printed by show_free_areas() - free swap pages, printed by show_swap_cache_info() - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: NJohannes Weiner <hannes@saeurebad.de> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Kmem cache passed to constructor is only needed for constructors that are themselves multiplexeres. Nobody uses this "feature", nor does anybody uses passed kmem cache in non-trivial way, so pass only pointer to object. Non-trivial places are: arch/powerpc/mm/init_64.c arch/powerpc/mm/hugetlbpage.c This is flag day, yes. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Acked-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Jon Tollefson <kniht@linux.vnet.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Matt Mackall <mpm@selenic.com> [akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c] [akpm@linux-foundation.org: fix mm/slab.c] [akpm@linux-foundation.org: fix ubifs] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 7月, 2008 4 次提交
-
-
由 Johannes Weiner 提交于
Almost all users of this field need a PFN instead of a physical address, so replace node_boot_start with node_min_pfn. [Lee.Schermerhorn@hp.com: fix spurious BUG_ON() in mark_bootmem()] Signed-off-by: NJohannes Weiner <hannes@saeureba.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Straight forward extensions for huge pages located in the PUD instead of PMDs. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
The goal of this patchset is to support multiple hugetlb page sizes. This is achieved by introducing a new struct hstate structure, which encapsulates the important hugetlb state and constants (eg. huge page size, number of huge pages currently allocated, etc). The hstate structure is then passed around the code which requires these fields, they will do the right thing regardless of the exact hstate they are operating on. This patch adds the hstate structure, with a single global instance of it (default_hstate), and does the basic work of converting hugetlb to use the hstate. Future patches will add more hstate structures to allow for different hugetlbfs mounts to have different page sizes. [akpm@linux-foundation.org: coding-style fixes] Acked-by: NAdam Litke <agl@us.ibm.com> Acked-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
There are a lot of places that define either a single bootmem descriptor or an array of them. Use only one central array with MAX_NUMNODES items instead. Signed-off-by: NJohannes Weiner <hannes@saeurebad.de> Acked-by: NRalf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 7月, 2008 1 次提交
-
-
由 Dmitry Baryshkov 提交于
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 5月, 2008 3 次提交
-
-
由 Magnus Damm 提交于
Add physical memory resources such as System RAM, Kernel code/data/bss and reserved crash dump area to /proc/iomem. Same strategy as on x86. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 28 4月, 2008 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
All architectures use an effectively identical definition of online_page(), so just make it common code. x86-64, ia64, powerpc and sh are actually identical; x86-32 is slightly different. x86-32's differences arise because it puts its hotplug pages in the highmem zone. We can handle this in the generic code by inspecting the page to see if its in highmem, and update the totalhigh_pages count appropriately. This leaves init_32.c:free_new_highpage with a single caller, so I folded it into add_one_highpage_init. I also removed an incorrect comment referring to the NUMA case; any NUMA details have already been dealt with by the time online_page() is called. [akpm@linux-foundation.org: fix indenting] Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: NDave Hansen <dave@linux.vnet.ibm.com> Reviewed-by: NKAMEZAWA Hiroyuki <kamez.hiroyu@jp.fujitsu.com> Tested-by: NKAMEZAWA Hiroyuki <kamez.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Christoph Lameter <clameter@sgi.com> Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NYasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 4月, 2008 1 次提交
-
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 06 3月, 2008 3 次提交
-
-
由 Paul Mundt 提交于
There's still work that needs to be done here, and this should not be enabled by default on existing boards. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Adrian Bunk 提交于
This patch fixes the following compile error: <-- snip --> ... CC arch/sh/mm/pg-sh7705.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/pg-sh7705.c: In function 'ptep_get_and_clear': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/pg-sh7705.c:130: error: implicit declaration of function 'mapping_writably_mapped' make[2]: *** [arch/sh/mm/pg-sh7705.o] Error 1 <-- snip --> Signed-off-by: NAdrian Bunk <adrian.bunk@movial.fi> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 14 2月, 2008 6 次提交
-
-
由 Hideo Saito 提交于
This acts as a reversion of 1c6b2ca5 in the case of UP SH-4, where we still have the risk of a multiple hit between the slow and fast paths. As seen on SH7780. Signed-off-by: NHideo Saito <saito@densan.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
sh64 doesn't provide __uncached_start, so don't reference it unconditionally. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
A number of cleanups to get the SH-5 cache management code in line with the rest of the SH backend. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Previously this took an explicit range, update this to use the same behaviour as the rest of the SH parts where we simply flush out a line from the start address. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
The idea is that we want to get rid of the in/out/readb/writeb callbacks from the machvec and replace that with simple inline read and write operations to memory. Fast and simple for most hardware devices (think pci). Some devices require special treatment though - like 16-bit only CF devices - so we need to have some method to hook in callbacks. This patch makes it possible to add a per-device trap generating filter. This way we can get maximum performance of sane hardware - which doesn't need this filter - and crappy hardware works but gets punished by a performance hit. V2 changes things around a bit and replaces io access callbacks with a simple minimum_bus_width value. In the future we can add stride as well. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch fixes the recently introduced declared coherent memory support. Without this fix a cached memory area is returned by dma_alloc_coherent() - unless dma_declare_coherent_memory() has setup a separate area. This patch makes sure an uncached memory area is returned. With this patch it is now possible to ping through an rtl8139 interface on r2d-plus. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 08 2月, 2008 1 次提交
-
-
由 Bernhard Walle 提交于
This patchset adds a flags variable to reserve_bootmem() and uses the BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions between crashkernel area and already used memory. This patch: Change the reserve_bootmem() function to accept a new flag BOOTMEM_EXCLUSIVE. If that flag is set, the function returns with -EBUSY if the memory already has been reserved in the past. This is to avoid conflicts. Because that code runs before SMP initialisation, there's no race condition inside reserve_bootmem_core(). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix powerpc build] Signed-off-by: NBernhard Walle <bwalle@suse.de> Cc: <linux-arch@vger.kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 1月, 2008 8 次提交
-
-
由 Magnus Damm 提交于
This patch adds declared coherent memory support to the sh architecture. All functions are based on the x86 implementation. Header files are adjusted to use the new functions instead of the former consistent_alloc() code. This version includes the few changes what were included in the fix patch together with modifications based on feedback from Paul. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Fixes up a build warning/error in arch/sh/mm/fault_32.c. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart Menefy 提交于
This saves us from having to use kmalloc() for the fixmap entries, which is needed early for the uncached fixmap. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart Menefy 提交于
Presently most of the 29-bit physical parts do P1/P2 segmentation with a 1:1 cached/uncached mapping, jumping between the two to control the caching behaviour. This provides the basic infrastructure to maintain this behaviour on 32-bit physical parts that don't map P1/P2 at all, using a shiny new linker section and corresponding fixmap entry. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-