send_mds_reconnect() may call discard_cap_releases() after all
release messages have been dropped by cleanup_cap_releases()
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Do not assume that r_old_dentry implies that r_old_dentry_dir is also
true.  Separate out the ref cleanup and make the debugs dump behave when
it is NULL.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NYan, Zheng <zheng.z.yan@intel.com>

Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Send requests that operate on path to directory's auth MDS if
mode == USE_AUTH_MDS. Always retry using the auth MDS if got
-ESTALE reply from non-auth MDS. Also clean up the code that
handles auth MDS change.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

- don't trim auth cap if there are flusing caps
- don't trim auth cap if any 'write' cap is wanted
- allow trimming non-auth cap even if the inode is dirty
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

In preparation for ceph_features.h update, change all features fields
from unsigned int/u32 to u64.  (ceph.git has ~40 feature bits at this
point.)
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

We also need to wake up 'safe' waiters if error occurs or request
aborted. Otherwise sync(2)/fsync(2) may hang forever.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Aborted requests usually get cleared when the reply is received.
If MDS crashes, no reply will be received. So we need to cleanup
aborted requests when re-sending requests.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

When a cap get released while composing the cap reconnect message.
We should skip queuing the release message if the cap hasn't been
added to the cap reconnect message.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

It's possible that some caps get released while composing the cap
reconnect message.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

call __queue_cap_release() in __ceph_remove_cap(), this avoids
acquiring s_cap_lock twice.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

If client has outdated directory fragments information, it may request
readdir an non-existent directory fragment. In this case, the MDS finds
an approximate directory fragment and sends its contents back to the
client. When receiving a reply with fragment that is different than the
requested one, the client need to reset the 'readdir offset'.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

commit 6f60f889 (ceph: fix freeing inode vs removing session caps race)
introduced ceph_lookup_inode(). But there is already a ceph_find_inode()
which provides similar function. So remove ceph_lookup_inode(), use
ceph_find_inode() instead.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NAlex Elder <alex.elder@linary.org>
Reviewed-by: NSage Weil <sage@inktank.com>

remove_session_caps() uses iterate_session_caps() to remove caps,
but iterate_session_caps() skips inodes that are being deleted.
So session->s_nr_caps can be non-zero after iterate_session_caps()
return.

We can fix the issue by waiting until deletions are complete.
__wait_on_freeing_inode() is designed for the job, but it is not
exported, so we use lookup inode function to access it.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

When register_session() is given an out-of-range argument for mds,
ceph_mdsmap_get_addr() will return a null pointer, which would be given to
ceph_con_open() & be dereferenced, causing a kernel oops. This fixes bug #4685
in the Ceph bug tracker <http://tracker.ceph.com/issues/4685>.
Signed-off-by: NNathaniel Yazdani <n1ght.4nd.d4y@gmail.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NJianpeng Ma <majianpeng@gmail.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Having a global lock that protects all of this code is a clear
scalability problem. Instead of doing that, move most of the code to be
protected by the i_lock instead. The exceptions are the global lists
that the ->fl_link sits on, and the ->fl_block list.

->fl_link is what connects these structures to the
global lists, so we must ensure that we hold those locks when iterating
over or updating these lists.

Furthermore, sound deadlock detection requires that we hold the
blocked_list state steady while checking for loops. We also must ensure
that the search and update to the list are atomic.

For the checking and insertion side of the blocked_list, push the
acquisition of the global lock into __posix_lock_file and ensure that
checking and update of the  blocked_list is done without dropping the
lock in between.

On the removal side, when waking up blocked lock waiters, take the
global lock before walking the blocked list and dequeue the waiters from
the global list prior to removal from the fl_block list.

With this, deadlock detection should be race free while we minimize
excessive file_lock_lock thrashing.

Finally, in order to avoid a lock inversion problem when handling
/proc/locks output we must ensure that manipulations of the fl_block
list are also protected by the file_lock_lock.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc()
while holding a lock, but it's spoiled because ceph_pagelist_addpage()
always calls kmap(), which might sleep.  Here's the result:

[13439.295457] ceph: mds0 reconnect start
[13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58
[13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1
    . . .
[13439.376225] Call Trace:
[13439.378757]  [<ffffffff81076f4c>] __might_sleep+0xfc/0x110
[13439.384353]  [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph]
[13439.391491]  [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph]
[13439.398035]  [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50
[13439.403775]  [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20
[13439.409277]  [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph]
[13439.415622]  [<ffffffff81196748>] ? igrab+0x28/0x70
[13439.420610]  [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph]
[13439.427584]  [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph]
[13439.434499]  [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph]
[13439.441646]  [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph]
[13439.448363]  [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph]
[13439.455250]  [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph]
[13439.461534]  [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph]
[13439.468432]  [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10
[13439.473934]  [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph]
[13439.480464]  [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph]
[13439.486492]  [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph]
[13439.493190]  [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph]
    . . .
[13439.587132] ceph: mds0 reconnect success
[13490.720032] ceph: mds0 caps stale
[13501.235257] ceph: mds0 recovery completed
[13501.300419] ceph: mds0 caps renewed

Fix it up by encoding locks into a buffer first, and when the number
of encoded locks is stable, copy that into a ceph_pagelist.

[elder@inktank.com: abbreviated the stack info a bit.]

Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: NJim Schutt <jaschut@sandia.gov>
Reviewed-by: NAlex Elder <elder@inktank.com>

In his review, Alex Elder mentioned that he hadn't checked that
num_fcntl_locks and num_flock_locks were properly decoded on the
server side, from a le32 over-the-wire type to a cpu type.
I checked, and AFAICS it is done; those interested can consult
    Locker::_do_cap_update()
in src/mds/Locker.cc and src/include/encoding.h in the Ceph server
code (git://github.com/ceph/ceph).

I also checked the server side for flock_len decoding, and I believe
that also happens correctly, by virtue of having been declared
__le32 in struct ceph_mds_cap_reconnect, in src/include/ceph_fs.h.

Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: NJim Schutt <jaschut@sandia.gov>
Reviewed-by: NAlex Elder <elder@inktank.com>

Change the names of the functions that put data on a pagelist to
reflect that we're adding to whatever's already there rather than
just setting it to the one thing.  Currently only one data item is
ever added to a message, but that's about to change.

This resolves:
    http://tracker.ceph.com/issues/2770Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Use wrapper functions that check whether the auth op exists so that callers
do not need a bunch of conditional checks.  Simplifies the external
interface.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Currently the messenger calls out to a get_authorizer con op, which will
create a new authorizer if it doesn't yet have one.  In the meantime, when
we rotate our service keys, the authorizer doesn't get updated.  Eventually
it will be rejected by the server on a new connection attempt and get
invalidated, and we will then rebuild a new authorizer, but this is not
ideal.

Instead, if we do have an authorizer, call a new update_authorizer op that
will verify that the current authorizer is using the latest secret.  If it
is not, we will build a new one that does.  This avoids the transient
failure.

This fixes one of the sorry sequence of events for bug

	http://tracker.ceph.com/issues/4282Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Current ceph code tracks directory's completeness in two places.
ceph_readdir() checks i_release_count to decide if it can set the
I_COMPLETE flag in i_ceph_flags. All other places check the I_COMPLETE
flag. This indirection introduces locking complexity.

This patch adds a new variable i_complete_count to ceph_inode_info.
Set i_release_count's value to it when marking a directory complete.
By comparing the two variables, we know if a directory is complete
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Change it so we only assign outgoing data information for messages
if there is outgoing data to send.

This then allows us to add a few more (currently commented-out)
assertions.

This is related to:
    http://tracker.ceph.com/issues/4284Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

Define ceph_msg_data_set_pagelist(), ceph_msg_data_set_bio(), and
ceph_msg_data_set_trail() to clearly abstract the assignment of the
remaining data-related fields in a ceph message structure.  Use the
new functions in the osd client and mds client.

This partially resolves:
    http://tracker.ceph.com/issues/4263Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When setting page array information for message data, provide the
byte length rather than the page count ceph_msg_data_set_pages().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define a function ceph_msg_data_set_pages(), which more clearly
abstracts the assignment page-related fields for data in a ceph
message structure.  Use this new function in the osd client and mds
client.

Ideally, these fields would never be set more than once (with
BUG_ON() calls to guarantee that).  At the moment though the osd
client sets these every time it receives a message, and in the event
of a communication problem this can happen more than once.  (This
will be resolved shortly, but setting up these helpers first makes
it all a bit easier to work with.)

Rearrange the field order in a ceph_msg structure to group those
that are used to define the possible data payloads.

This partially resolves:
    http://tracker.ceph.com/issues/4263Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently, incoming mds messages never use page data, which means
there is no need to set the page_alignment field in the message.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

The only user of the ceph messenger that doesn't define an alloc_msg
method is the mds client.  Define one, such that it works just like
it did before, and simplify ceph_con_in_msg_alloc() by assuming the
alloc_msg method is always present.

This and the next patch resolve:
    http://tracker.ceph.com/issues/4322Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

The pagelist_count field is never actually used, so get rid of it.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

commit 22cddde1 breaks the atomicity of write operation, it also
introduces a deadlock between write and truncate.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

Conflicts:
	fs/ceph/addr.c

commit c6ffe100 moved the flag that tracks if the dcache contents
for a directory are complete to dentry. The problem is there are
lots of places that use ceph_dir_{set,clear,test}_complete() while
holding i_ceph_lock. but ceph_dir_{set,clear,test}_complete() may
sleep because they call dput().

This patch basically reverts that commit. For ceph_d_prune(), it's
called with both the dentry to prune and the parent dentry are
locked. So it's safe to access the parent dentry's d_inode and
clear I_COMPLETE flag.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

So the client will later send cap release message to MDS
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

commit 6e8575fa makes parse_reply_info_extra() return -EIO for LSSNAP
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

Use distinct fields for tracking the number of pages in a message's
page array and in a message's page list.  Currently only one or the
other is used at a time, but that will be changing soon.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Hold the uid and gid for a pending ceph mds request using the types
kuid_t and kgid_t.  When a request message is finally created convert
the kuid_t and kgid_t values into uids and gids in the initial user
namespace.

Cc: Sage Weil <sage@inktank.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>