The hardware does not decode the 16, 20 or 24 bit variety.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When reporting decoded protocol use the enum rather than the bitmap.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Simplify the code a little.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

ir_raw_event_handle is called anyway after the hw fifo content stored
in nvt->buf[] has been written to the kfifo. There is not really a
benefit in the potential additional call to ir_raw_event_handle
whilst nvt->buf[] is being processed.
Getting rid of this additional call allows to simplify the code.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The call to nvt_get_rx_ir_data and nvt_process_rx_ir_data from
the ISR is protected with spinlock nvt->lock. Therefore it's
guaranteed that nvt->pkts is 0 when entering nvt_get_rx_ir_data
(as nvt->pkts is set to 0 at the end of nvt_process_rx_ir_data).
Having said that we can remove b_idx.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When removing module nuvoton-cir I get a fifo overrun warning.
It turned out to be caused by a spurious interrupt when the logical CIR
device is being disabled (although no interrupt source bit being set).
Reading the interrupt status register returns 0xff, therefore the fifo
overrun bit is mistakenly interpreted as being set.

Fix this by ignoring interrupts when interrupt source and status register
reads return 0xff.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When removing module ir_lirc_codec I got this deadlock warning.
Fix this by introducing a separate mutex to protect access
to available_protocols instead of using ir_raw_handler_lock
for this purpose.

======================================================
[ INFO: possible circular locking dependency detected ]
4.7.0-next-20160729 #1 Not tainted
-------------------------------------------------------
rmmod/2542 is trying to acquire lock:
 (&dev->lock){+.+.+.}, at: [<ffffffffa03b1267>]
			ir_raw_handler_unregister+0x77/0xd0 [rc_core]

but task is already holding lock:
 (ir_raw_handler_lock){+.+.+.}, at: [<ffffffffa03b1212>]
			ir_raw_handler_unregister+0x22/0xd0 [rc_core]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (ir_raw_handler_lock){+.+.+.}:
       [<ffffffff810ab1f2>] lock_acquire+0xb2/0x1e0
       [<ffffffff815c087f>] mutex_lock_nested+0x5f/0x360
       [<ffffffffa03b1403>] ir_raw_get_allowed_protocols+0x13/0x30 [rc_core]
       [<ffffffffa03af8ea>] store_protocols+0x2fa/0x480 [rc_core]
       [<ffffffff8143e143>] dev_attr_store+0x13/0x20
       [<ffffffff81213c50>] sysfs_kf_write+0x40/0x50
       [<ffffffff81212f60>] kernfs_fop_write+0x150/0x1e0
       [<ffffffff81197613>] __vfs_write+0x23/0x120
       [<ffffffff81198740>] vfs_write+0xb0/0x190
       [<ffffffff81199a34>] SyS_write+0x44/0xa0
       [<ffffffff815c55a5>] entry_SYSCALL_64_fastpath+0x18/0xa8

-> #0 (&dev->lock){+.+.+.}:
       [<ffffffff810aac8c>] __lock_acquire+0x10fc/0x1270
       [<ffffffff810ab1f2>] lock_acquire+0xb2/0x1e0
       [<ffffffff815c087f>] mutex_lock_nested+0x5f/0x360
       [<ffffffffa03b1267>] ir_raw_handler_unregister+0x77/0xd0 [rc_core]
       [<ffffffffa03c8c05>] ir_lirc_codec_exit+0x10/0x12 [ir_lirc_codec]
       [<ffffffff810e1b88>] SyS_delete_module+0x168/0x220
       [<ffffffff815c55a5>] entry_SYSCALL_64_fastpath+0x18/0xa8

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(ir_raw_handler_lock);
                               lock(&dev->lock);
                               lock(ir_raw_handler_lock);
  lock(&dev->lock);

 *** DEADLOCK ***

1 lock held by rmmod/2542:
 #0:  (ir_raw_handler_lock){+.+.+.}, at: [<ffffffffa03b1212>]
			ir_raw_handler_unregister+0x22/0xd0 [rc_core]

stack backtrace:
CPU: 0 PID: 2542 Comm: rmmod Not tainted 4.7.0-next-20160729 #1
Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015
 0000000000000000 ffff88006e607cc0 ffffffff812715f5 ffffffff8232b230
 ffffffff8232b230 ffff88006e607d00 ffffffff810a846e 00000000790107f0
 ffff880079010818 ffff8800790107f0 1efeb9f4f0dd2e6f ffff880079010000
Call Trace:
 [<ffffffff812715f5>] dump_stack+0x68/0x93
 [<ffffffff810a846e>] print_circular_bug+0x1be/0x210
 [<ffffffff810aac8c>] __lock_acquire+0x10fc/0x1270
 [<ffffffff810bcead>] ? debug_lockdep_rcu_enabled+0x1d/0x20
 [<ffffffff810ab1f2>] lock_acquire+0xb2/0x1e0
 [<ffffffffa03b1267>] ? ir_raw_handler_unregister+0x77/0xd0 [rc_core]
 [<ffffffff815c087f>] mutex_lock_nested+0x5f/0x360
 [<ffffffffa03b1267>] ? ir_raw_handler_unregister+0x77/0xd0 [rc_core]
 [<ffffffff810a980e>] ? trace_hardirqs_on_caller+0xee/0x1b0
 [<ffffffffa03b1267>] ir_raw_handler_unregister+0x77/0xd0 [rc_core]
 [<ffffffffa03c8c05>] ir_lirc_codec_exit+0x10/0x12 [ir_lirc_codec]
 [<ffffffff810e1b88>] SyS_delete_module+0x168/0x220
 [<ffffffff815c55a5>] entry_SYSCALL_64_fastpath+0x18/0xa8
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This partly reverts commit 078600f5.

Due to the relocation of input_register_device() call, holding down a
button on an IR remote no longer resulted in repeated key down events.
Signed-off-by: NOle Ernst <olebowle@gmx.com>
Tested-by: NMatthias Reichl <hias@horus.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use regmap for I2C register access.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check demod and ts locks and report lock status according to those.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use correct device for logging functions as we now have it due to
proper I2C client bindings.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add I2C driver bindings in order to support proper I2C driver
registration with driver core.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Return DVBv5 statistics via legacy DVBv3 API.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Implement dvbv5 statistics for DVB-C.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Implement dvbv5 statistics for DVB-T2.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Implement dvbv5 statistics for DVB-T.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use 64-bit calculation.

Return error if tuner does not provide get_if_frequency() callback.
All currently used tuners has it.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

New IOCTLs (especially for the request API) do not necessarily need the
graph mutex acquired. Leave this up to the drivers.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Refactor copying the IOCTL argument structs from the user space and back,
in order to reduce code copied around and make the implementation more
robust.

As a result, the copying is done while not holding the graph mutex.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Each IOCTL handler can be listed in an array instead of using a large and
cumbersome switch. Do that.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Preparation for refactoring media IOCTL handling to unify common parts.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of relying on the "simple-bus" compatible and the driver core
populating FIMC-IS child devices make the fimc-is driver populating
its child devices.  This prevents issues related to accessing ISP_I2C
clock registers with corresponding power domain switched off, which
popped out after applying some pending IOMMU driver patches.  Now the
I2C_ISP child devices will be instantiated only when required parent
device drivers are initialized and ready.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Since commit 04f59143
("i2c: let I2C masters ignore their children for PM")
the power.ignore_children flag is set when registering an I2C
adapter.  Since I2C transfers are not managed by the fimc-isp-i2c
driver its clients use pm_runtime_* calls directly to communicate
required power state of the bus controller.

However, when the power.ignore_children flag is set that doesn't
work, so clear that flag back after registering the adapter.
While at it drop pm_runtime_enable() call on the i2c_adapter
as it is already done by the I2C subsystem when registering
I2C adapter.

This patch is meant as a minimal change to fix the regression,
eventually the I2C_ISPx clock handling will be moved to the
top level fimc-is driver and whole runtime PM code is going to
be dropped from the fimc-is-i2c module.

Cc: <stable@vger.kernel.org> # 4.7+
Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Suppresses warnings like:
s5p-fimc-md camera: Entity type for entity S5C73M3-OIF was not initialized!
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Suppresses warning like:
s5p-fimc-md camera: Entity type for entity S5K6A3 13-0010 was not initialized!
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Suppresses following warnings:

s5p-fimc-md camera: Entity type for entity FIMC.0 was not initialized!
s5p-fimc-md camera: Entity type for entity FIMC.1 was not initialized!
s5p-fimc-md camera: Entity type for entity s5p-mipi-csis.0 was not initialized!
s5p-fimc-md camera: Entity type for entity s5p-mipi-csis.1 was not initialized!
s5p-fimc-md camera: Entity type for entity FIMC-LITE.0 was not initialized!
s5p-fimc-md camera: Entity type for entity FIMC-LITE.1 was not initialized!
s5p-fimc-md camera: Entity type for entity FIMC-IS-ISP was not initialized!
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There is no need to keep all clocks prepared all the time. Call to
clk_prepare/unprepare can be done on demand from runtime pm callbacks
(it is allowed to call sleeping functions from that context).
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch adds 3 more clocks to Exynos4 ISP driver. Enabling them is
needed to make the hardware operational. Till now it worked only because
those clocks were registered with IGNORE_UNUSED flag and were enabled
by default after SoC reset.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

It is likely that checking the result of the memory allocation just above
is expected here.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use generic helpers instead of open-coding usage of runtime PM for system
sleep PM, which was potentially broken for some corner cases.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use generic helpers instead of open-coding usage of runtime PM for system
sleep PM, which was potentially broken for some corner cases.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

As warned by linuxdoc[1] tool, using:

$ for i in $(git grep kernel-doc Documentation/media/kapi/|cut -d: -f4); do kernel-lintdoc --sloppy $i; done

    include/media/v4l2-dev.h:118 :WARN: function name from comment differs:  v4l2_prio_close <--> v4l2_prio_check
    include/media/v4l2-mc.h:56 [kernel-doc WARN] : enum name from comment differs:  if_vid_dec_index <--> if_vid_dec_pad_index
    include/media/v4l2-mc.h:71 [kernel-doc WARN] : enum name from comment differs:  if_aud_dec_index <--> if_aud_dec_pad_index
    include/media/v4l2-mem2mem.h:396 [kernel-doc WARN] : function name from comment differs:  v4l2_m2m_num_src_bufs_ready <--> v4l2_m2m_num_dst_bufs_ready
    drivers/media/dvb-core/dvb_math.h:28 [kernel-doc WARN] : function name from comment differs:  cintlog2 <--> intlog2
    include/media/v4l2-subdev.h:215 [kernel-doc WARN] : struct name from comment differs:  s_radio <--> v4l2_subdev_tuner_ops
    include/media/v4l2-subdev.h:890 [kernel-doc WARN] : function name from comment differs:  v4l2_set_subdevdata <--> v4l2_set_subdev_hostdata
    include/media/v4l2-subdev.h:901 [kernel-doc WARN] : function name from comment differs:  v4l2_get_subdevdata <--> v4l2_get_subdev_hostdata
    drivers/media/dvb-core/dvb_ringbuffer.h:196 [kernel-doc WARN] : function name from comment differs:  dvb_ringbuffer_writeuser <--> dvb_ringbuffer_write_user
    include/media/videobuf2-core.h:399 [kernel-doc WARN] : struct name from comment differs:  vb2_ops <--> vb2_buf_ops
    include/media/media-entity.h:132 [kernel-doc ERROR] : duplicate parameter definition 'source'
    include/media/media-entity.h:477 [kernel-doc WARN] : function name from comment differs:  media_entity_enum_test <--> media_entity_enum_test_and_set
    include/media/media-entity.h:535 [kernel-doc WARN] : function name from comment differs:  gobj_to_entity <--> gobj_to_pad
    include/media/media-entity.h:544 [kernel-doc WARN] : function name from comment differs:  gobj_to_entity <--> gobj_to_link
    include/media/media-entity.h:553 [kernel-doc WARN] : function name from comment differs:  gobj_to_entity <--> gobj_to_intf
    include/media/media-entity.h:562 [kernel-doc WARN] : function name from comment differs:  gobj_to_entity <--> intf_to_devnode
    include/media/rc-core.h:234 [kernel-doc WARN] : function name from comment differs:  rc_open <--> rc_close
    include/media/v4l2-ctrls.h:397 [kernel-doc WARN] : missing initial short description of 'v4l2_ctrl_handler_init'
    include/media/v4l2-dev.h:118 [kernel-doc WARN] : function name from comment differs:  v4l2_prio_close <--> v4l2_prio_check
    include/media/v4l2-event.h:225 [kernel-doc WARN] : missing initial short description of 'v4l2_src_change_event_subscribe'

[1] https://return42.github.io/linuxdoc/linux.html

The above are real issues at the documentation. On several cases,
caused by cut-and-paste.

 Fix them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Shorten the tables by removing row numbers in comments, allowing for
later insertion of rows with minimal diffs.

All changes have been generated by the following script.

import io
import re
import sys

def process_table(fname, data):
	if fname.endswith('hist-v4l2.rst'):
		data = re.sub(u'\n{1,2}\t( ?)  -( ?) ?', u'\n\t\\1 -\\2', data, flags = re.MULTILINE)
		data = re.sub(u'\n(\t|       )-  \.\. row [0-9]+\n\t  ?-( ?) ?', u'\\1* -\\2', data, flags = re.MULTILINE)
	else:
		data = re.sub(u'\n{1,2}       -( ?) ?', u'\n      -\\1', data, flags = re.MULTILINE)
		data = re.sub(u'(\n?)(\n\n    -  \.\. row 1\n)', u'\n\\2', data, flags = re.MULTILINE)
		data = re.sub(u'\n    -  \.\. row [0-9]+\n      -( ?) ?', u'    * -\\1', data, flags = re.MULTILINE)
		data = re.sub(u'\n    -  \.\. row [0-9]+\n       \.\. (_[A-Z0-9_`-]*:)', u'\n    -  .. \\1', data, flags = re.MULTILINE)
		data = re.sub(u'\n    -  \.\. (_[A-Z0-9_`-]*:)\n      -', u'    * .. \\1\n\n      -', data, flags = re.MULTILINE)
		data = re.sub(u'^       - ', u'      -', data, flags = re.MULTILINE)
		data = re.sub(u'^(\t{1,2})  ', u'\\1', data, flags = re.MULTILINE)

	return data

def process_file(fname, data):
	buf = io.StringIO(data)
	output = ''
	in_table = False
	table_separator = 0

	for line in buf.readlines():
		if line.find('.. flat-table::') != -1:
			in_table = True
			table = ''
		elif in_table and not re.match('^[\t\n]|(    )', line):
			in_table = False
			output += process_table(fname, table)

		if in_table:
			table += line
		else:
			output += line

	if in_table:
		in_table = False
		output += process_table(fname, table)

	return output

fname = sys.argv[1]

data = file(fname, 'rb').read().decode('utf-8')
data = process_file(fname, data)
file(fname, 'wb').write(data.encode('utf-8'))
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Fix a few indentation issues to enable automated table reorganization
by a regex-based script.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Merge back from docs-next in order to get the cdomain extension.

With such extension, the number of warnings when building docs
in nitpick mode reduced from 22 to 2 warnings.

* docs-next/docs-next:
  docs/driver-model: fix typo
  DMA-API-HOWTO: <asm/generic/scatterlist.h> is no more
  doc-rst:c-domain: function-like macros arguments
  doc-rst:c-domain: fix sphinx version incompatibility
  Documentation/filesystems: Fixed typo
  docs: Don't format internal MPT docs
  docs: split up serial-interfaces.rst
  docs: Pull the HSI documentation together
  docs: Special-case function-pointer parameters in kernel-doc
  docs: make kernel-doc handle varargs properly
  x86: fix memory ranges in mm documentation
  documentation/scsi: Remove nodisconnect parameter
  doc: ioctl: Add some clarifications to botching-up-ioctls
  docs: split up the driver book
  Docs: sphinxify device-drivers.tmpl

Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Adds G_EDID and S_EDID.
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The driver is maintained and supported, document it as such.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The HW can capture both ODD and EVEN fields in separate buffers so it's
possible to support V4L2_FIELD_ALTERNATE. This patch add support for
this mode.

At probe time and when S_STD is called the driver will default to use
V4L2_FIELD_INTERLACED if the subdevice reports V4L2_FIELD_ALTERNATE. The
driver will only change the field type if the subdevice implements
G_STD, if not it will keep the default at V4L2_FIELD_ALTERNATE.

The user can always explicitly ask for V4L2_FIELD_ALTERNATE in S_FMT and
the driver will use that field format.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The height used for V4L2_FIELD_TOP and V4L2_FIELD_BOTTOM where wrong.
The frames only contain one field so the height should be half of the
frame.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>