- 26 2月, 2014 30 次提交
-
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. A couple of prints are difficult to convert with dev_err() so they are converted to pr_err() at least. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. A couple of prints are difficult to convert with dev_err() so they are converted to pr_err() at least. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Some debug prints are replaced with dev_dbg(), too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. The debug prints are also reformatted to suit with dev_dbg(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Some debug prints are replaced with dev_dbg(), too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Some commented debug prints are also enabled as dev_dbg(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. All debug print macros have been replaced with dev_dbg(), too. Also, added the missing definition of snd_azf3328_ctrl_inw(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
We have a better infrastructure in general, so let's reduce the home-baked debug macros. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Also, correct the printk level appropriately. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
We have a better infrastructure in general, so let's reduce the home-baked debug macros. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This driver slipped from the last rewrite. Just convert to the new standard pm ops. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 2月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
The GPIO line used for the mute LED control on Lenovo Yxx0 laptops is cleared unexpectedly when the codec goes to D3, typically by power-saving. For avoiding it, add a power filter in the fixup. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16373Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 2月, 2014 1 次提交
-
-
由 Takashi Sakamoto 提交于
'snd_rawmidi_transmit_reset()' and 'snd_rawmidi_receive_reset()' are declared but not defined. This state has been continue over 10 years. So let us remove them. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 2月, 2014 2 次提交
-
-
由 Takashi Iwai 提交于
While moving the card device into struct snd_card, the reference to the assigned card in sysfs show/store callbacks were forgotten to be refreshed, still accessing to the no longer used drvdata. Fix these places to refer correctly via container_of(). Also, remove the superfluous NULL checks since it's guaranteed to be non-NULL now. Fixes: 8bfb181c ('ALSA: Embed card device into struct snd_card') Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 2月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
Avoid traversing the device object list of the card instance just for checking the PCM streams. The driver's private object already contains the array of substream pointers, so it can be simply looked through. The card internal may be restructured in future, thus better not to rely on it. Also, this fixes the possible deadlocks in PCM mutex. Instead of taking multiple PCM mutexes, just take the common mutex in all places. Along with it, rename prepare_mutex as pcm_mutex. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 2月, 2014 3 次提交
-
-
由 Takashi Iwai 提交于
Some codec drivers still have it since using PCI_VENDOR_ID_*. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Realtek codec driver contains some codes referring to the PCI subdevice IDs, but most of them are optional, typically for checking the codec name variants. Add NULL checks appropriately so that it can work without PCI assignment. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The default parent device can be obtained directly via card object, so we don't need to rely on pci->dev.parent. Since there is no access to pci_dev, we can reduce the inclusion of linux/pci.h, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 2月, 2014 2 次提交
-
-
由 Kirill Tkhai 提交于
Function del_timer() does not guarantee that timer was really deleted. If the timer handler is beeing executed at the moment, the function does nothing. So, it's possible to use already freed memory in the handler: [ref: Documentation/DocBook/kernel-locking.tmpl] This was found using grep and compile-tested only. Signed-off-by: NKirill Tkhai <ktkhai@parallels.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Using __bitwise and typedefs for the attributes of snd_device struct isn't so useful, and rather it worsens the readability. Let's drop them and use the straightforward enum. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-