Fix the NULL pointer dereference while running amdgpu_test:

[   54.972246] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[   54.972265] IP:           (null)
[   54.972273] PGD 0 P4D 0
[   54.972280] Oops: 0010 [#1] SMP PTI
[   54.972288] Modules linked in: amdkfd amd_iommu_v2 amdgpu(OE) chash gpu_sched ttm drm_kms_helper drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep intel_rapl snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq snd_seq_device kvm irqbypass snd_timer crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd soundcore joydev input_leds aesni_intel aes_x86_64 crypto_simd glue_helper cryptd idma64 virt_dma mei_me intel_lpss_pci serio_raw intel_cstate intel_rapl_perf shpchp intel_pch_thermal mei mac_hid intel_lpss acpi_pad parport_pc ppdev nfsd lp auth_rpcgss nfs_acl lockd grace sunrpc parport autofs4 hid_generic
[   54.972434]  usbhid mxm_wmi e1000e psmouse ahci hid libahci wmi pinctrl_sunrisepoint video pinctrl_intel
[   54.972457] CPU: 6 PID: 1393 Comm: uvd Tainted: G           OE    4.16.0-rc7-27fb84fda777 #1
[   54.972473] Hardware name: MSI MS-7984/Z170 KRAIT GAMING (MS-7984), BIOS B.80 05/11/2016
[   54.972489] RIP: 0010:          (null)
[   54.972497] RSP: 0018:ffffaea002c8bcc0 EFLAGS: 00010202
[   54.972508] RAX: 0000000000000000 RBX: ffff9d30d3c56f60 RCX: 00000000007c0002
[   54.972522] RDX: 000000000001a6fb RSI: 000000000001a6e9 RDI: ffff9d30d3c56f60
[   54.972536] RBP: ffffaea002c8bd10 R08: 0000000000000002 R09: ffffffffc06977d0
[   54.972550] R10: 0000000000000040 R11: 0000000000000000 R12: 0000000000000002
[   54.972564] R13: ffff9d30d3c5001c R14: ffff9d30d3c50000 R15: 0000000000000006
[   54.972579] FS:  0000000000000000(0000) GS:ffff9d30eed80000(0000) knlGS:0000000000000000
[   54.972594] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   54.972606] CR2: 0000000000000000 CR3: 00000002dbc0a001 CR4: 00000000003606e0
[   54.972620] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   54.972634] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   54.972648] Call Trace:
[   54.972685]  ? gmc_v9_0_emit_flush_gpu_tlb+0x111/0x140 [amdgpu]
[   54.972721]  uvd_v7_0_ring_emit_vm_flush+0x31/0x70 [amdgpu]
[   54.972751]  amdgpu_vm_flush+0x5dc/0x6c0 [amdgpu]
[   54.972787]  ? pp_dpm_powergate_uvd+0x50/0x80 [amdgpu]
[   54.972816]  amdgpu_ib_schedule+0x120/0x4e0 [amdgpu]
[   54.972850]  amdgpu_job_run+0x17b/0x1c0 [amdgpu]
[   54.972861]  drm_sched_main+0x2cc/0x490 [gpu_sched]
[   54.972873]  ? wait_woken+0x80/0x80
[   54.972882]  kthread+0x121/0x140
[   54.972891]  ? drm_sched_job_finish+0xf0/0xf0 [gpu_sched]
[   54.972902]  ? kthread_create_worker_on_cpu+0x70/0x70
[   54.972914]  ret_from_fork+0x35/0x40
[   54.972922] Code:  Bad RIP value.
[   54.972932] RIP:           (null) RSP: ffffaea002c8bcc0
[   54.972943] CR2: 0000000000000000
[   54.972951] ---[ end trace 5feb349263bbf633 ]---
Signed-off-by: NXiaojie Yuan <Xiaojie.Yuan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

After host os reset gpu reset, need to set flag in_gpu_reset to
zero.
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When put the IB test out of exclusive mode, and do sriov reset,
the IB test will randomly fail. As out of exclusive mode it uses
kiq to do read and write registers, but as it has world switch,
the kiq read and write time will be random, sometimes it will
beyond the MAX_KIQ_REG_WAIT and then the read or write register
will fail, which will result the IB test fail.
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DC is preferred.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: use proper register rather than hardcoding.
Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Directly loaded by VBIOS
Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The method struct vga_switcheroo_handler::get_client_id() is defined
as returning an 'enum vga_switcheroo_client_id' but the implementation
in this driver, amdgpu_atpx_get_client_id(), returns an 'int'.

Fix this by returning 'enum vga_switcheroo_client_id' in this driver too.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. support more than 8 values when setting get_pp_dpm_mclk/
sclk/pcie, the former design just parse command format like
"echo xxxx >　pp_dpm_sclk" and current can parse "echo xx xxx
 xxxx > pp_dpm_sclk" whose operation is more user-friendly
and convinent and can offer more values;
2. be compatible with former design like "xx".
3. add DOC: pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie
Bug:KFD-385
Signed-off-by: Nwelu <wei.lu2@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise, the SQ may skip some of the register writes, or shader waves may
be allocated where we don't expect them, so that as a result we don't actually
reset all of the register SRAMs. This can lead to spurious ECC errors later on
if a shader uses an uninitialized register.
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NDavid Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enables sg display if vram size <= THRESHOLD(256M); otherwise
still use vram as display buffer.
This patch fixed some potention issues introduced by change
"allow framebuffer in GART memory as well" due to CZ/ST hardware
limitation.

v2: Change default setting to auto.
v3: Move some logic from amdgpu_display_framebuffer_domains()
    to pin function, suggested by Christian.
v4: Split into several patches.
v5: Drop module parameter for now.
Signed-off-by: NSamuel Li <Samuel.Li@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when user cat pp_od_clk_voltage
add display info about the sclk/mclk/vddc range that user can overdrive
output as:
OD_SCLK:
0:        300MHz        900mV
1:        400MHz        912mV
2:        500MHz        925mV
3:        600MHz        937mV
4:        700MHz        950mV
5:        800MHz        975mV
6:        900MHz        987mV
7:       1000MHz       1000mV
OD_MCLK:
0:        300MHz        900mV
1:       1500MHz        912mV
OD_RANGE:
SCLK:     300MHz       1200MHz
MCLK:     300MHz       1500MHz
VDDC:     700mV        1200mV

also
1. remove unnecessary whitespace before a quoted newline
2. change unit of frequency Mhz to MHz
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

sysfs interface for fine grained clock and voltage control.
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

sysfs file for adjusting power level heuristics.
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used for manually masking dpm states.

v2: drop comment about current state (Rex)
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This file is for uploading new powerplay tables.
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is a legacy file and is only provided for
backwards compatibility.
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Provide documentation for power_dpm_force_performance_level
which is used to adjust things related to GPU power states.
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This fixes an issue introduced by change "allow framebuffer in GART
memory as well" which could lead to a shared buffer ending up
pinned in vram.  Use GTT if it is included in the domain, otherwise
return an error.
Signed-off-by: NSamuel Li <Samuel.Li@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It returns supported domains for display, and domains actually used are to be
decided later when pinned.
Signed-off-by: NSamuel Li <Samuel.Li@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>