- 03 6月, 2010 2 次提交
-
-
由 Amit Shah 提交于
When removing a port we don't check if a program was blocked for read. This leads to a crash when SIGTERM is sent to the program after hot-unplugging the port. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Christoph Hellwig 提交于
We need at least one S/G element to operate properly, as does the block layer which increments it to one anyway. We hit this due to a qemu bug which advertises a sg_elements of 0 under some circumstances. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (tweaked logic)
-
- 02 6月, 2010 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Don't export cvt_fd & _df when CONFIG_PPC_FPU is not set powerpc/44x: icon: select SM502 and frame buffer console support powerpc/85xx: Add P1021MDS board support powerpc/85xx: Change MPC8572DS camp dtses for MSI sharing powerpc/fsl_msi: add removal path and probe failing path powerpc/fsl_msi: enable msi sharing through AMP OSes powerpc/fsl_msi: enable msi allocation in all banks powerpc/fsl_msi: fix the conflict of virt_msir's chip_data powerpc/fsl_msi: Add multiple MSI bank support powerpc/kexec: Add support for FSL-BookE powerpc/fsl-booke: Move the entry setup code into a seperate file powerpc/fsl-booke: fix the case where we are not in the first page powerpc/85xx: Enable support for ports 3 and 4 on 8548 CDS powerpc/fsl-booke: Add hibernation support for FSL BookE processors powerpc/e500mc: Implement machine check handler. powerpc/44x: Add basic ICON PPC440SPe board support powerpc/44x: Fix UART clocks on 440SPe powerpc/44x: Add reset-type to katmai.dts powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC.
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel由 Linus Torvalds 提交于
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (41 commits) drm/i915: add HAS_BSD check to i915_getparam drm/i915: Honor sync polarity from VBT panel timing descriptors drm/i915: Unmask interrupt for render engine on Sandybridge drm/i915: Fix PIPE_CONTROL command on Sandybridge drm/i915: Fix up address spaces in slow_kernel_write() drm/i915: Use non-atomic kmap for slow copy paths drm/i915: Avoid moving from CPU domain during pwrite drm/i915: Cleanup after failed initialization of ringbuffers drm/i915: Reject bind_to_gtt() early if object > aperture drm/i915: Check error code whilst moving buffer to GTT domain. drm/i915: Remove spurious warning "Failure to install fence" drm/i915: Rebind bo if currently bound with incorrect alignment. drm/i915: Include pitch in set_base debug statement. drm/i915: Only print "nothing to do" debug message as required. drm/i915: Propagate error from unbinding an unfenceable object. drm/i915: Avoid nesting of domain changes when setting display plane drm/i915: Hold the spinlock whilst resetting unpin_work along error path drm/i915: Only print an message if there was an error drm/i915: Clean up leftover bits from hws move to ring structure. drm/i915: Add CxSR support on Pineview DDR3 ...
-
由 Dan Carpenter 提交于
fscache_write_op() makes unnecessary checks of the page variable to see if it is NULL. It can't be NULL at those points as the kernel would already have crashed a little higher up where we examined page->index. Furthermore, unless radix_tree_gang_lookup_tag() can return 1 but no page, a NULL pointer crash should not be encountered there as we can only get there if r_t_g_l_t() returned 1. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zou Nan hai 提交于
This will let userland only try to use the new media decode functionality when the appropriate kernel is present. Signed-off-by: NZou Nan hai <nanhai.zou@intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Adam Jackson 提交于
I'm actually kind of shocked that it works at all otherwise. Signed-off-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Randy Dunlap 提交于
We should only build hpet_example on x86[-64], where it is implemented. It can cause build errors on other architectures. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Denis Kirjanov 提交于
Fix a possible null pointer dereference in afs_alloc_server(): the server pointer is NULL if there was an allocation failure, and under such a condition, we can't dereference it in the _leave() statement. Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel J Blueman 提交于
In commit e9fb7631 ("cpu-hotplug: introduce cpu_notify(), __cpu_notify(), cpu_notify_nofail()") the new helper functions access cpu_chain. As a result, it shouldn't be marked __cpuinitdata (via section mismatch warning). Alternatively, the helper functions should be forced inline, or marked __ref or __cpuinit. In the meantime, this patch silences the warning the trivial way. Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 6月, 2010 15 次提交
-
-
git://repo.or.cz/linux-kbuild由 Linus Torvalds 提交于
* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits) kbuild: Revert part of e8d400a9 to resolve a conflict kbuild: Fix checking of scm-identifier variable gconfig: add support to show hidden options that have prompts menuconfig: add support to show hidden options which have prompts gconfig: remove show_debug option gconfig: remove dbg_print_ptype() and dbg_print_stype() kconfig: fix zconfdump() kconfig: some small fixes add random binaries to .gitignore kbuild: Include gen_initramfs_list.sh and the file list in the .d file kconfig: recalc symbol value before showing search results .gitignore: ignore *.lzo files headerdep: perlcritic warning scripts/Makefile.lib: Align the output of LZO kbuild: Generate modules.builtin in make modules_install Revert "kbuild: specify absolute paths for cscope" kbuild: Do not unnecessarily regenerate modules.builtin headers_install: use local file handles headers_check: fix perl warnings export_report: fix perl warnings ...
-
git://www.jni.nu/cris由 Linus Torvalds 提交于
* 'for-linus' of git://www.jni.nu/cris: CRIS: Don't use mask_irq as symbol name CRIS: Simplify param.h by simply including <asm-generic/param.h> CRISv10: Whitespace fixes for hw_settings.S CRISv10: Trivial fixes. CRISv32: Fix RS485 port 4 CD Kconfig item. CRISv32: Remove duplicated Kconfig items. cris: push down BKL into some device drivers
-
由 Alan Cox 提交于
Commands with data must set the length in the message. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits) drivers/isdn/hardware/mISDN: Use GFP_ATOMIC when a lock is held ksz884x: Add missing validate_addr hook ksz884x: convert to netdev_tx_t virtio-net: pass gfp to add_buf be2net: convert hdr.timeout in be_cmd_loopback_test() to le32 can: mpc5xxx_can.c: Fix build failure net/ipv4/tcp_input.c: fix compilation breakage when FASTRETRANS_DEBUG > 1 net: sock_queue_err_skb() dont mess with sk_forward_alloc netfilter: xtables: stackptr should be percpu netfilter: don't xt_jumpstack_alloc twice in xt_register_table greth: Fix build after OF device conversions. net: fix sk_forward_alloc corruptions Phonet: listening socket lock protects the connected socket list caif: unlock on error path in cfserl_receive() be2net: remove superfluous externs be2net: add unlock on error path net/rds: Add missing mutex_unlock drivers/isdn/hardware/mISDN: Add missing spin_unlock fs_enet: Adjust BDs after tx error skb: make skb_recycle_check() return a bool value ...
-
由 Takuya Yoshikawa 提交于
clear_user() returns the number of bytes that could not be copied rather than an error code. So we should return -EFAULT rather than directly returning the results. Without this patch, positive values may be returned to elf_fdpic_map_file() and the following error handlings do not function as expected. 1. ret = elf_fdpic_map_file_constdisp_on_uclinux(params, file, mm); if (ret < 0) return ret; 2. ret = elf_fdpic_map_file_by_direct_mmap(params, file, mm); if (ret < 0) return ret; Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NMike Frysinger <vapier@gentoo.org> CC: Alexander Viro <viro@zeniv.linux.org.uk> CC: Andrew Morton <akpm@linux-foundation.org> CC: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com> CC: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Julia Lawall 提交于
The function inittiger is only called from nj_init_card, where a lock is held. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @gfp exists@ identifier fn; position p; @@ fn(...) { ... when != spin_unlock_irqrestore when any GFP_KERNEL@p ... when any } @locked@ identifier gfp.fn; @@ spin_lock_irqsave(...) ... when != spin_unlock_irqrestore fn(...) @depends on locked@ position gfp.p; @@ - GFP_KERNEL@p + GFP_ATOMIC // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Kirjanov 提交于
Add missing validate_addr hook Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Kirjanov 提交于
Convert TX hook to netdev_tx_t type Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
virtio-net bounces buffer allocations off to a thread if it can't allocate buffers from the atomic pool. However, if posting buffers still requires atomic buffers, this is unlikely to succeed. Fix by passing in the proper gfp_t parameter. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
The current code fails on ppc as hdr.timeout is not being converted to le32. Signed-off-by: NSathya Perla <sathyap@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anatolij Gustschin 提交于
Fixes build error caused by the OF device_node pointer being moved into struct device. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Commit: c720c7e8 missed these. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Correct sk_forward_alloc handling for error_queue would need to use a backlog of frames that softirq handler could not deliver because socket is owned by user thread. Or extend backlog processing to be able to process normal and error packets. Another possibility is to not use mem charge for error queue, this is what I implemented in this patch. Note: this reverts commit 29030374 (net: fix sk_forward_alloc corruptions), since we dont need to lock socket anymore. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rusty Russell 提交于
Rafael sees a sometimes crash at precpu_modfree from kernel/module.c; it only occurred with another (since-reverted) patch, but that patch simply changed timing to uncover this bug, it was otherwise unrelated. The comment about the mod being freed is self-explanatory, but neither Tejun nor I read it. This bug was introduced in 259354de, after it had previously been fixed in 6e2b7574. How embarrassing. Reported-by: N"Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Embarrassingly-Acked-by: NTejun Heo <tj@kernel.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Tested-by: N"Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 5月, 2010 15 次提交
-
-
由 Eric Dumazet 提交于
commit f3c5c1bf (netfilter: xtables: make ip_tables reentrant) introduced a performance regression, because stackptr array is shared by all cpus, adding cache line ping pongs. (16 cpus share a 64 bytes cache line) Fix this using alloc_percpu() Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-By: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Xiaotian Feng 提交于
In xt_register_table, xt_jumpstack_alloc is called first, later xt_replace_table is used. But in xt_replace_table, xt_jumpstack_alloc will be used again. Then the memory allocated by previous xt_jumpstack_alloc will be leaked. We can simply remove the previous xt_jumpstack_alloc because there aren't any users of newinfo between xt_jumpstack_alloc and xt_replace_table. Signed-off-by: NXiaotian Feng <dfeng@redhat.com> Cc: Patrick McHardy <kaber@trash.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jan Engelhardt <jengelh@medozas.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alexey Dobriyan <adobriyan@gmail.com> Acked-By: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Conflicts: arch/powerpc/sysdev/fsl_msi.c
-
由 Benjamin Herrenschmidt 提交于
-
由 Linus Torvalds 提交于
.. and thus endeth the merge window.
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6由 Linus Torvalds 提交于
* 'slub/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: SLUB: Allow full duplication of kmalloc array for 390 slub: move kmem_cache_node into it's own cacheline
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: mutex: Fix optimistic spinning vs. BKL
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tui: Fix last use_browser problem related to .perfconfig perf symbols: Add the build id cache to the vmlinux path perf tui: Reset use_browser if stdout is not a tty ring-buffer: Move zeroing out excess in page to ring buffer code ring-buffer: Reset "real_end" when page is filled
-
由 Linus Torvalds 提交于
This partially reverts commit 4ec37de8 ("[IA64] Fix build breakage"), since the commit that made it necessary got reverted earlier (see commit 35926ff5, 'Revert "cpusets: randomize node rotor used in cpuset_mem_spread_node()"') Even if we ever re-introduce this, there is no reason to make __node_random be some architecture-specific function. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: mm: export generic_pipe_buf_*() to modules fuse: support splice() reading from fuse device fuse: allow splice to move pages mm: export remove_from_page_cache() to modules mm: export lru_cache_add_*() to modules fuse: support splice() writing to fuse device fuse: get page reference for readpages fuse: use get_user_pages_fast() fuse: remove unneeded variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig: kconfig: Hide error output in find command in streamline_config.pl kconfig: Fix typo in comment in streamline_config.pl kconfig: Make a variable local in streamline_config.pl
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6由 Linus Torvalds 提交于
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (47 commits) mfd: Rename twl5031 sih modules mfd: Storage class for timberdale should be before const qualifier mfd: Remove unneeded and dangerous clearing of clientdata mfd: New AB8500 driver gpio: Fix inverted rdc321x gpio data out registers mfd: Change rdc321x resources flags to IORESOURCE_IO mfd: Move pcf50633 irq related functions to its own file. mfd: Use threaded irq for pcf50633 mfd: pcf50633-adc: Fix potential race in pcf50633_adc_sync_read mfd: Fix pcf50633 bitfield logic in interrupt handler gpio: rdc321x needs to select MFD_CORE mfd: Use menuconfig for quicker config editing ARM: AB3550 board configuration and irq for U300 mfd: AB3550 core driver mfd: AB3100 register access change to abx500 API mfd: Renamed ab3100.h to abx500.h gpio: Add TC35892 GPIO driver mfd: Add Toshiba's TC35892 MFD core mfd: Delay to mask tsc irq in max8925 mfd: Remove incorrect wm8350 kfree ...
-