Also the R4000 / R4600 LL/SC instructions imply a sync so no explicit sync
needed.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

N32 SysV IPC system calls should use 32-bit compatible code.
arch/mips/kernel/linux32.c have similar compatible code for O32, but
ipc/compat.c seems more complete.  We can use it for both N32 and O32.

This patch should fix these problems (and other possible problems):

http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1149188824.6986.6.camel%40diimka-laptop
http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=44C6B829.8050508%40caviumnetworks.comSigned-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This shaves of around 4kB and a few cycles for the average kernel that
has CONFIG_BUG enabled.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Make clocksource_mips public and get rid of mips_hpt_read,
mips_hpt_mask.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Now we have both function and macro version of do_IRQ() and the former
is used only by DEC and non-preemptive kernel.  This patch makes
everyone use the macro version and removes the function version.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Further incorporation of generic irq framework.  Replacing __do_IRQ()
by proper flow handler would make the irq handling path a bit simpler
and faster.

* use generic_handle_irq() instead of __do_IRQ().
* use handle_level_irq for obvious level-type irq chips.
* use handle_percpu_irq for irqs marked as IRQ_PER_CPU.
* setup .eoi routine for irq chips possibly used with handle_percpu_irq.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is a big irq cleanup patch.

* Use set_irq_chip() to register irq_chip.
* Initialize .mask, .unmask, .mask_ack field.  Functions for these
  method are already exist in most case.
* Do not initialize .startup, .shutdown, .enable, .disable fields if
  default routines provided by irq_chip_set_defaults() were suitable.
* Remove redundant irq_desc initializations.
* Remove unnecessary local_irq_save/local_irq_restore, spin_lock.

With this cleanup, it would be easy to switch to slightly lightwait
irq flow handlers (handle_level_irq(), etc.) instead of __do_IRQ().

Though whole this patch is quite large, changes in each irq_chip are
not quite simple.  Please review and test on your platform.  Thanks.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Currently nobody outside time.c require mips_hpt_init().  Remove it
and call c0_hpt_timer_init() directly if R4k counter was used for
timer interrupt.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A tiny userland application loading the kernel and invoking kexec_load for 
mips is available here:

http://chac.le-poulpe.net/~nico/kexec/kexec-2006-10-18.tar.gzSigned-off-by: NRalf Baechle <ralf@linux-mips.org>

Not useful and quite a big of noise on bootup of large systems.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add special short path for emulationg RDHWR which is used to support TLS.
Add an extra prologue for cpu_has_vtag_icache case.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is a patch to load 64-bit modules to CKSEG0 so that can be
compiled with -msym32 option.  This makes each module ~10% smaller.

* introduce MODULE_START and MODULE_END
* custom module_alloc()
* PGD for modules
* change XTLB refill handler synthesizer
* enable -msym32 for modules again
  (revert ca78b1a5c6a6e70e052d3ea253828e49b5d07c8a)

New XTLB refill handler looks like this:

80000080 dmfc0   k0,C0_BADVADDR
80000084 bltz    k0,800000e4			# goto l_module_alloc
80000088 lui     k1,0x8046			# %high(pgd_current)
8000008c ld      k1,24600(k1)			# %low(pgd_current)
80000090 dsrl    k0,k0,0x1b			# l_vmalloc_done:
80000094 andi    k0,k0,0x1ff8
80000098 daddu   k1,k1,k0
8000009c dmfc0   k0,C0_BADVADDR
800000a0 ld      k1,0(k1)
800000a4 dsrl    k0,k0,0x12
800000a8 andi    k0,k0,0xff8
800000ac daddu   k1,k1,k0
800000b0 dmfc0   k0,C0_XCONTEXT
800000b4 ld      k1,0(k1)
800000b8 andi    k0,k0,0xff0
800000bc daddu   k1,k1,k0
800000c0 ld      k0,0(k1)
800000c4 ld      k1,8(k1)
800000c8 dsrl    k0,k0,0x6
800000cc mtc0    k0,C0_ENTRYLO0
800000d0 dsrl    k1,k1,0x6
800000d4 mtc0    k1,C0_ENTRYL01
800000d8 nop
800000dc tlbwr
800000e0 eret
800000e4 dsll    k1,k0,0x2			# l_module_alloc:
800000e8 bgez    k1,80000008			# goto l_vmalloc
800000ec lui     k1,0xc000
800000f0 dsubu   k0,k0,k1
800000f4 lui     k1,0x8046			# %high(module_pg_dir)
800000f8 beq     zero,zero,80000000
800000fc nop
80000000 beq     zero,zero,80000090		# goto l_vmalloc_done
80000004 daddiu  k1,k1,0x4000
80000008 dsll32  k1,k1,0x0			# l_vmalloc:
8000000c dsubu   k0,k0,k1
80000010 beq     zero,zero,80000090		# goto l_vmalloc_done
80000014 lui     k1,0x8046			# %high(swapper_pg_dir)
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It should fix the broken code in resource_init() too.
Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

and use new __pa() implementation instead introduced by the previous
patch. Indeed this macro can be used now even by the 64 bit kernels
with CONFIG_BUILD_ELF64=n config.
Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Otherwise CPU 0 doesn't show up in sysfs which breaks some software.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Derived from Peter Watkins <treestem@gmail.com>'s work.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since we already moved to GENERIC_TIME, we should implement alternatives
of old do_gettimeoffset routines to get sub-jiffies resolution from
gettimeofday().  This patch includes:

 * MIPS clocksource support (based on works by Manish Lachwani).
 * remove unused gettimeoffset routines and related codes.
 * remove unised 64bit do_div64_32().
 * simplify mips_hpt_init. (no argument needed, __init tag)
 * simplify c0_hpt_timer_init. (no need to write to c0_count)
 * remove some hpt_init routines.
 * mips_hpt_mask variable to specify bitmask of hpt value.
 * convert jmr3927_do_gettimeoffset to jmr3927_hpt_read.
 * convert ip27_do_gettimeoffset to ip27_hpt_read.
 * convert bcm1480_do_gettimeoffset to bcm1480_hpt_read.
 * simplify sb1250 hpt functions. (no need to subtract and shift)
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/kernel/traps.c:1115: warning: int format, long unsigned int arg (arg 2)
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add a vmlinux.lds.h helper macro for defining the eight-level initcall table,
teach all the architectures to use it.

This is a prerequisite for a patch which performs initcall synchronisation for
multithreaded-probing.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
[ Added AVR32 as well ]
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CONFIG_KALLSYMS=n case is obviously wrong, though it is harmless since
CONFIG_KALLSYMS is always enabled with CONFIG_STACKTRACE for now.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This fixes mount problems with smbfs, ncpfs and NFSv4.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A sign extension bug did result in sys_personality being invoked with a
0xffffffffffffffffUL argument, so querying the current personality didn't
work.
Signed-off-by: NThiemo Seufer <ths@networkno.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This new routine doesn't lookup for symbol names. So we needn't
to pass any char buffers or pointer since we don't care about
names.
Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Make sure cpu_has_fpu (which uses smp_processor_id()) is used only in
atomic context.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Make sure that RA on top of interrupt stack is an address of ret_from_irq,
so that dump_stack etc. can trace info interrupted context.

Also this patch fixes except_vec_vi_handler and __smtc_ipi_vector which
seems broken.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Only revisions < 4.0 don't have a functional wait instruction.

From Thomas Koeller (Thomas.Koeller@baslerweb.com).
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>