提交 ffd9a0fc 编写于 作者: R Robert Baldyga 提交者: Felipe Balbi

usb: gadget: add 'quirk_altset_not_supp' to usb_gadget

Due to some UDC controllers may not support altsettings, usb gadget layer
needs to provide a generic way to inform gadget functions about non-standard
hardware limitations.

This patch adds 'quirk_altset_not_supp' field to struct usb_gadget and helper
function gadget_is_altset_supported(). It also sets 'quirk_altset_not_supp'
to 1 in pxa25x_udc and pxa27x_udc drivers, which have such limitation.
Signed-off-by: NRobert Baldyga <r.baldyga@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
上级 c0bd5456
......@@ -1176,6 +1176,7 @@ static void udc_reinit(struct pxa25x_udc *dev)
INIT_LIST_HEAD (&dev->gadget.ep_list);
INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
dev->ep0state = EP0_IDLE;
dev->gadget.quirk_altset_not_supp = 1;
/* basic endpoint records init */
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
......
......@@ -1710,6 +1710,7 @@ static void udc_init_data(struct pxa_udc *dev)
INIT_LIST_HEAD(&dev->gadget.ep_list);
INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
dev->udc_usb_ep[0].pxa_ep = &dev->pxa_ep[0];
dev->gadget.quirk_altset_not_supp = 1;
ep0_idle(dev);
/* PXA endpoints init */
......
......@@ -572,6 +572,7 @@ struct usb_gadget {
unsigned a_hnp_support:1;
unsigned a_alt_hnp_support:1;
unsigned quirk_ep_out_aligned_size:1;
unsigned quirk_altset_not_supp:1;
unsigned is_selfpowered:1;
unsigned deactivated:1;
unsigned connected:1;
......@@ -609,6 +610,16 @@ usb_ep_align_maybe(struct usb_gadget *g, struct usb_ep *ep, size_t len)
round_up(len, (size_t)ep->desc->wMaxPacketSize);
}
/**
* gadget_is_altset_supported - return true iff the hardware supports
* altsettings
* @g: controller to check for quirk
*/
static inline int gadget_is_altset_supported(struct usb_gadget *g)
{
return !g->quirk_altset_not_supp;
}
/**
* gadget_is_dualspeed - return true iff the hardware handles high speed
* @g: controller that might support both high and full speeds
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册