Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 ff3b24fa 编写于 作者: C Christof Schmitt 提交者： James Bottomley
浏览文件
操作

[SCSI] zfcp: Update message with input from review 

Update the kernel messages in zfcp with input from the message review
and remove some messages that have been identified as redundant.
Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NSwen Schillig <swen@vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
上级 2450d3e7
隐藏空白更改
内联 并排
Showing with 127 addition and 207 deletion
drivers/s390/scsi/zfcp_aux.c
浏览文件 @ ff3b24fa
......@@ -100,8 +100,7 @@ static int __init zfcp_device_setup(char *devstr)
err_out:
kfree(str);
pr_err("zfcp: Parse error for device parameter string %s, "
"device not attached.\n", devstr);
pr_err("zfcp: %s is not a valid SCSI device\n", devstr);
return 0;
}
......@@ -193,13 +192,14 @@ static int __init zfcp_module_init(void)
retval = misc_register(&zfcp_cfdc_misc);
if (retval) {
pr_err("zfcp: registration of misc device zfcp_cfdc failed\n");
pr_err("zfcp: Registering the misc device zfcp_cfdc failed\n");
goto out_misc;
}
retval = zfcp_ccw_register();
if (retval) {
pr_err("zfcp: Registration with common I/O layer failed.\n");
pr_err("zfcp: The zfcp device driver could not register with "
"the common I/O layer\n");
goto out_ccw_register;
}
......
drivers/s390/scsi/zfcp_ccw.c
浏览文件 @ ff3b24fa
......@@ -25,7 +25,8 @@ static int zfcp_ccw_probe(struct ccw_device *ccw_device)
down(&zfcp_data.config_sema);
if (zfcp_adapter_enqueue(ccw_device)) {
dev_err(&ccw_device->dev,
"Setup of data structures failed.\n");
"Setting up data structures for the "
"FCP adapter failed\n");
retval = -EINVAL;
}
up(&zfcp_data.config_sema);
......@@ -156,15 +157,18 @@ static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
switch (event) {
case CIO_GONE:
dev_warn(&adapter->ccw_device->dev, "device gone\n");
dev_warn(&adapter->ccw_device->dev,
"The FCP device has been detached\n");
zfcp_erp_adapter_shutdown(adapter, 0, 87, NULL);
break;
case CIO_NO_PATH:
dev_warn(&adapter->ccw_device->dev, "no path\n");
dev_warn(&adapter->ccw_device->dev,
"The CHPID for the FCP device is offline\n");
zfcp_erp_adapter_shutdown(adapter, 0, 88, NULL);
break;
case CIO_OPER:
dev_info(&adapter->ccw_device->dev, "operational again\n");
dev_info(&adapter->ccw_device->dev,
"The FCP device is operational again\n");
zfcp_erp_modify_adapter_status(adapter, 11, NULL,
ZFCP_STATUS_COMMON_RUNNING,
ZFCP_SET);
......
drivers/s390/scsi/zfcp_dbf.c
浏览文件 @ ff3b24fa
......@@ -570,7 +570,7 @@ static const char *zfcp_rec_dbf_ids[] = {
[125] = "need newer zfcp",
[126] = "need newer microcode",
[127] = "arbitrated loop not supported",
[128] = "unknown topology",
[128] = "",
[129] = "qtcb size mismatch",
[130] = "unknown fsf status ecd",
[131] = "fcp request too big",
......
drivers/s390/scsi/zfcp_erp.c
浏览文件 @ ff3b24fa
......@@ -901,11 +901,6 @@ static int zfcp_erp_open_ptp_port(struct zfcp_erp_action *act)
struct zfcp_port *port = act->port;
if (port->wwpn != adapter->peer_wwpn) {
dev_err(&adapter->ccw_device->dev,
"Failed to open port 0x%016Lx, "
"Peer WWPN 0x%016Lx does not "
"match.\n", port->wwpn,
adapter->peer_wwpn);
zfcp_erp_port_failed(port, 25, NULL);
return ZFCP_ERP_FAILED;
}
......@@ -929,7 +924,8 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act)
return zfcp_erp_open_ptp_port(act);
if (!ns_port) {
dev_err(&adapter->ccw_device->dev,
"Nameserver port unavailable.\n");
"Attaching the name server port to the "
"FCP device failed\n");
return ZFCP_ERP_FAILED;
}
if (!(atomic_read(&ns_port->status) &
......@@ -1065,8 +1061,13 @@ static int zfcp_erp_strategy_check_unit(struct zfcp_unit *unit, int result)
break;
case ZFCP_ERP_FAILED :
atomic_inc(&unit->erp_counter);
if (atomic_read(&unit->erp_counter) > ZFCP_MAX_ERPS)
if (atomic_read(&unit->erp_counter) > ZFCP_MAX_ERPS) {
dev_err(&unit->port->adapter->ccw_device->dev,
"ERP failed for unit 0x%016Lx on "
"port 0x%016Lx\n",
unit->fcp_lun, unit->port->wwpn);
zfcp_erp_unit_failed(unit, 21, NULL);
}
break;
}
......@@ -1091,8 +1092,12 @@ static int zfcp_erp_strategy_check_port(struct zfcp_port *port, int result)
result = ZFCP_ERP_EXIT;
}
atomic_inc(&port->erp_counter);
if (atomic_read(&port->erp_counter) > ZFCP_MAX_ERPS)
if (atomic_read(&port->erp_counter) > ZFCP_MAX_ERPS) {
dev_err(&port->adapter->ccw_device->dev,
"ERP failed for remote port 0x%016Lx\n",
port->wwpn);
zfcp_erp_port_failed(port, 22, NULL);
}
break;
}
......@@ -1114,8 +1119,12 @@ static int zfcp_erp_strategy_check_adapter(struct zfcp_adapter *adapter,
case ZFCP_ERP_FAILED :
atomic_inc(&adapter->erp_counter);
if (atomic_read(&adapter->erp_counter) > ZFCP_MAX_ERPS)
if (atomic_read(&adapter->erp_counter) > ZFCP_MAX_ERPS) {
dev_err(&adapter->ccw_device->dev,
"ERP cannot recover an error "
"on the FCP device\n");
zfcp_erp_adapter_failed(adapter, 23, NULL);
}
break;
}
......@@ -1263,8 +1272,7 @@ static void zfcp_erp_schedule_work(struct zfcp_unit *unit)
p = kzalloc(sizeof(*p), GFP_KERNEL);
if (!p) {
dev_err(&unit->port->adapter->ccw_device->dev,
"Out of resources. Could not register unit "
"0x%016Lx on port 0x%016Lx with SCSI stack.\n",
"Registering unit 0x%016Lx on port 0x%016Lx failed\n",
unit->fcp_lun, unit->port->wwpn);
return;
}
......@@ -1286,8 +1294,8 @@ static void zfcp_erp_rport_register(struct zfcp_port *port)
port->rport = fc_remote_port_add(port->adapter->scsi_host, 0, &ids);
if (!port->rport) {
dev_err(&port->adapter->ccw_device->dev,
"Failed registration of rport "
"0x%016Lx.\n", port->wwpn);
"Registering port 0x%016Lx failed\n",
port->wwpn);
return;
}
......@@ -1484,7 +1492,7 @@ int zfcp_erp_thread_setup(struct zfcp_adapter *adapter)
retval = kernel_thread(zfcp_erp_thread, adapter, SIGCHLD);
if (retval < 0) {
dev_err(&adapter->ccw_device->dev,
"Creation of ERP thread failed.\n");
"Creating an ERP thread for the FCP device failed.\n");
return retval;
}
wait_event(adapter->erp_thread_wqh,
......@@ -1526,7 +1534,6 @@ void zfcp_erp_adapter_failed(struct zfcp_adapter *adapter, u8 id, void *ref)
{
zfcp_erp_modify_adapter_status(adapter, id, ref,
ZFCP_STATUS_COMMON_ERP_FAILED, ZFCP_SET);
dev_err(&adapter->ccw_device->dev, "Adapter ERP failed.\n");
}
/**
......@@ -1539,15 +1546,6 @@ void zfcp_erp_port_failed(struct zfcp_port *port, u8 id, void *ref)
{
zfcp_erp_modify_port_status(port, id, ref,
ZFCP_STATUS_COMMON_ERP_FAILED, ZFCP_SET);
if (atomic_read(&port->status) & ZFCP_STATUS_PORT_WKA)
dev_err(&port->adapter->ccw_device->dev,
"Port ERP failed for WKA port d_id=0x%06x.\n",
port->d_id);
else
dev_err(&port->adapter->ccw_device->dev,
"Port ERP failed for port wwpn=0x%016Lx.\n",
port->wwpn);
}
/**
......@@ -1560,10 +1558,6 @@ void zfcp_erp_unit_failed(struct zfcp_unit *unit, u8 id, void *ref)
{
zfcp_erp_modify_unit_status(unit, id, ref,
ZFCP_STATUS_COMMON_ERP_FAILED, ZFCP_SET);
dev_err(&unit->port->adapter->ccw_device->dev,
"Unit ERP failed for unit 0x%016Lx on port 0x%016Lx.\n",
unit->fcp_lun, unit->port->wwpn);
}
/**
......
drivers/s390/scsi/zfcp_fsf.c
浏览文件 @ ff3b24fa
......@@ -50,19 +50,16 @@ static u32 fsf_qtcb_type[] = {
[FSF_QTCB_UPLOAD_CONTROL_FILE] = FSF_SUPPORT_COMMAND
};
static const char *zfcp_act_subtable_type[] = {
"unknown", "OS", "WWPN", "DID", "LUN"
};
static void zfcp_act_eval_err(struct zfcp_adapter *adapter, u32 table)
{
u16 subtable = table >> 16;
u16 rule = table & 0xffff;
const char *act_type[] = { "unknown", "OS", "WWPN", "DID", "LUN" };
if (subtable && subtable < ARRAY_SIZE(zfcp_act_subtable_type))
if (subtable && subtable < ARRAY_SIZE(act_type))
dev_warn(&adapter->ccw_device->dev,
"Access denied in subtable %s, rule %d.\n",
zfcp_act_subtable_type[subtable], rule);
"Access denied according to ACT rule type %s, "
"rule %d\n", act_type[subtable], rule);
}
static void zfcp_fsf_access_denied_port(struct zfcp_fsf_req *req,
......@@ -70,7 +67,7 @@ static void zfcp_fsf_access_denied_port(struct zfcp_fsf_req *req,
{
struct fsf_qtcb_header *header = &req->qtcb->header;
dev_warn(&req->adapter->ccw_device->dev,
"Access denied, cannot send command to port 0x%016Lx.\n",
"Access denied to port 0x%016Lx\n",
port->wwpn);
zfcp_act_eval_err(req->adapter, header->fsf_status_qual.halfword[0]);
zfcp_act_eval_err(req->adapter, header->fsf_status_qual.halfword[1]);
......@@ -83,7 +80,7 @@ static void zfcp_fsf_access_denied_unit(struct zfcp_fsf_req *req,
{
struct fsf_qtcb_header *header = &req->qtcb->header;
dev_warn(&req->adapter->ccw_device->dev,
"Access denied for unit 0x%016Lx on port 0x%016Lx.\n",
"Access denied to unit 0x%016Lx on port 0x%016Lx\n",
unit->fcp_lun, unit->port->wwpn);
zfcp_act_eval_err(req->adapter, header->fsf_status_qual.halfword[0]);
zfcp_act_eval_err(req->adapter, header->fsf_status_qual.halfword[1]);
......@@ -93,9 +90,8 @@ static void zfcp_fsf_access_denied_unit(struct zfcp_fsf_req *req,
static void zfcp_fsf_class_not_supp(struct zfcp_fsf_req *req)
{
dev_err(&req->adapter->ccw_device->dev,
"Required FC class not supported by adapter, "
"shutting down adapter.\n");
dev_err(&req->adapter->ccw_device->dev, "FCP device not "
"operational because of an unsupported FC class\n");
zfcp_erp_adapter_shutdown(req->adapter, 0, 123, req);
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
}
......@@ -171,42 +167,6 @@ static void zfcp_fsf_status_read_port_closed(struct zfcp_fsf_req *req)
read_unlock_irqrestore(&zfcp_data.config_lock, flags);
}
static void zfcp_fsf_bit_error_threshold(struct zfcp_fsf_req *req)
{
struct zfcp_adapter *adapter = req->adapter;
struct fsf_status_read_buffer *sr_buf = req->data;
struct fsf_bit_error_payload *err = &sr_buf->payload.bit_error;
dev_warn(&adapter->ccw_device->dev,
"Warning: bit error threshold data "
"received for the adapter: "
"link failures = %i, loss of sync errors = %i, "
"loss of signal errors = %i, "
"primitive sequence errors = %i, "
"invalid transmission word errors = %i, "
"CRC errors = %i).\n",
err->link_failure_error_count,
err->loss_of_sync_error_count,
err->loss_of_signal_error_count,
err->primitive_sequence_error_count,
err->invalid_transmission_word_error_count,
err->crc_error_count);
dev_warn(&adapter->ccw_device->dev,
"Additional bit error threshold data of the adapter: "
"primitive sequence event time-outs = %i, "
"elastic buffer overrun errors = %i, "
"advertised receive buffer-to-buffer credit = %i, "
"current receice buffer-to-buffer credit = %i, "
"advertised transmit buffer-to-buffer credit = %i, "
"current transmit buffer-to-buffer credit = %i).\n",
err->primitive_sequence_event_timeout_count,
err->elastic_buffer_overrun_error_count,
err->advertised_receive_b2b_credit,
err->current_receive_b2b_credit,
err->advertised_transmit_b2b_credit,
err->current_transmit_b2b_credit);
}
static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, u8 id,
struct fsf_link_down_info *link_down)
{
......@@ -223,62 +183,66 @@ static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, u8 id,
switch (link_down->error_code) {
case FSF_PSQ_LINK_NO_LIGHT:
dev_warn(&req->adapter->ccw_device->dev,
"The local link is down: no light detected.\n");
"There is no light signal from the local "
"fibre channel cable\n");
break;
case FSF_PSQ_LINK_WRAP_PLUG:
dev_warn(&req->adapter->ccw_device->dev,
"The local link is down: wrap plug detected.\n");
"There is a wrap plug instead of a fibre "
"channel cable\n");
break;
case FSF_PSQ_LINK_NO_FCP:
dev_warn(&req->adapter->ccw_device->dev,
"The local link is down: "
"adjacent node on link does not support FCP.\n");
"The adjacent fibre channel node does not "
"support FCP\n");
break;
case FSF_PSQ_LINK_FIRMWARE_UPDATE:
dev_warn(&req->adapter->ccw_device->dev,
"The local link is down: "
"firmware update in progress.\n");
"The FCP device is suspended because of a "
"firmware update\n");
break;
case FSF_PSQ_LINK_INVALID_WWPN:
dev_warn(&req->adapter->ccw_device->dev,
"The local link is down: "
"duplicate or invalid WWPN detected.\n");
"The FCP device detected a WWPN that is "
"duplicate or not valid\n");
break;
case FSF_PSQ_LINK_NO_NPIV_SUPPORT:
dev_warn(&req->adapter->ccw_device->dev,
"The local link is down: "
"no support for NPIV by Fabric.\n");
"The fibre channel fabric does not support NPIV\n");
break;
case FSF_PSQ_LINK_NO_FCP_RESOURCES:
dev_warn(&req->adapter->ccw_device->dev,
"The local link is down: "
"out of resource in FCP daughtercard.\n");
"The FCP adapter cannot support more NPIV ports\n");
break;
case FSF_PSQ_LINK_NO_FABRIC_RESOURCES:
dev_warn(&req->adapter->ccw_device->dev,
"The local link is down: "
"out of resource in Fabric.\n");
"The adjacent switch cannot support "
"more NPIV ports\n");
break;
case FSF_PSQ_LINK_FABRIC_LOGIN_UNABLE:
dev_warn(&req->adapter->ccw_device->dev,
"The local link is down: "
"unable to login to Fabric.\n");
"The FCP adapter could not log in to the "
"fibre channel fabric\n");
break;
case FSF_PSQ_LINK_WWPN_ASSIGNMENT_CORRUPTED:
dev_warn(&req->adapter->ccw_device->dev,
"WWPN assignment file corrupted on adapter.\n");
"The WWPN assignment file on the FCP adapter "
"has been damaged\n");
break;
case FSF_PSQ_LINK_MODE_TABLE_CURRUPTED:
dev_warn(&req->adapter->ccw_device->dev,
"Mode table corrupted on adapter.\n");
"The mode table on the FCP adapter "
"has been damaged\n");
break;
case FSF_PSQ_LINK_NO_WWPN_ASSIGNMENT:
dev_warn(&req->adapter->ccw_device->dev,
"No WWPN for assignment table on adapter.\n");
"All NPIV ports on the FCP adapter have "
"been assigned\n");
break;
default:
dev_warn(&req->adapter->ccw_device->dev,
"The local link to adapter is down.\n");
"The link between the FCP adapter and "
"the FC fabric is down\n");
}
out:
zfcp_erp_adapter_failed(adapter, id, req);
......@@ -286,27 +250,18 @@ static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, u8 id,
static void zfcp_fsf_status_read_link_down(struct zfcp_fsf_req *req)
{
struct zfcp_adapter *adapter = req->adapter;
struct fsf_status_read_buffer *sr_buf = req->data;
struct fsf_link_down_info *ldi =
(struct fsf_link_down_info *) &sr_buf->payload;
switch (sr_buf->status_subtype) {
case FSF_STATUS_READ_SUB_NO_PHYSICAL_LINK:
dev_warn(&adapter->ccw_device->dev,
"Physical link is down.\n");
zfcp_fsf_link_down_info_eval(req, 38, ldi);
break;
case FSF_STATUS_READ_SUB_FDISC_FAILED:
dev_warn(&adapter->ccw_device->dev,
"Local link is down "
"due to failed FDISC login.\n");
zfcp_fsf_link_down_info_eval(req, 39, ldi);
break;
case FSF_STATUS_READ_SUB_FIRMWARE_UPDATE:
dev_warn(&adapter->ccw_device->dev,
"Local link is down "
"due to firmware update on adapter.\n");
zfcp_fsf_link_down_info_eval(req, 40, NULL);
};
}
......@@ -335,14 +290,16 @@ static void zfcp_fsf_status_read_handler(struct zfcp_fsf_req *req)
case FSF_STATUS_READ_SENSE_DATA_AVAIL:
break;
case FSF_STATUS_READ_BIT_ERROR_THRESHOLD:
zfcp_fsf_bit_error_threshold(req);
dev_warn(&adapter->ccw_device->dev,
"The error threshold for checksum statistics "
"has been exceeded\n");
break;
case FSF_STATUS_READ_LINK_DOWN:
zfcp_fsf_status_read_link_down(req);
break;
case FSF_STATUS_READ_LINK_UP:
dev_info(&adapter->ccw_device->dev,
"Local link was replugged.\n");
"The local link has been restored\n");
/* All ports should be marked as ready to run again */
zfcp_erp_modify_adapter_status(adapter, 30, NULL,
ZFCP_STATUS_COMMON_RUNNING,
......@@ -386,8 +343,8 @@ static void zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *req)
break;
case FSF_SQ_NO_RECOM:
dev_err(&req->adapter->ccw_device->dev,
"No recommendation could be given for a "
"problem on the adapter.\n");
"The FCP adapter reported a problem "
"that cannot be recovered\n");
zfcp_erp_adapter_shutdown(req->adapter, 0, 121, req);
break;
}
......@@ -403,8 +360,7 @@ static void zfcp_fsf_fsfstatus_eval(struct zfcp_fsf_req *req)
switch (req->qtcb->header.fsf_status) {
case FSF_UNKNOWN_COMMAND:
dev_err(&req->adapter->ccw_device->dev,
"Command issued by the device driver (0x%x) is "
"not known by the adapter.\n",
"The FCP adapter does not recognize the command 0x%x\n",
req->qtcb->header.fsf_command);
zfcp_erp_adapter_shutdown(req->adapter, 0, 120, req);
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
......@@ -435,11 +391,9 @@ static void zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *req)
return;
case FSF_PROT_QTCB_VERSION_ERROR:
dev_err(&adapter->ccw_device->dev,
"The QTCB version requested by zfcp (0x%x) is not "
"supported by the FCP adapter (lowest supported "
"0x%x, highest supported 0x%x).\n",
FSF_QTCB_CURRENT_VERSION, psq->word[0],
psq->word[1]);
"QTCB version 0x%x not supported by FCP adapter "
"(0x%x to 0x%x)\n", FSF_QTCB_CURRENT_VERSION,
psq->word[0], psq->word[1]);
zfcp_erp_adapter_shutdown(adapter, 0, 117, req);
break;
case FSF_PROT_ERROR_STATE:
......@@ -449,8 +403,7 @@ static void zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *req)
break;
case FSF_PROT_UNSUPP_QTCB_TYPE:
dev_err(&adapter->ccw_device->dev,
"Packet header type used by the device driver is "
"incompatible with that used on the adapter.\n");
"The QTCB type is not supported by the FCP adapter\n");
zfcp_erp_adapter_shutdown(adapter, 0, 118, req);
break;
case FSF_PROT_HOST_CONNECTION_INITIALIZING:
......@@ -459,7 +412,7 @@ static void zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *req)
break;
case FSF_PROT_DUPLICATE_REQUEST_ID:
dev_err(&adapter->ccw_device->dev,
"The request identifier 0x%Lx is ambiguous.\n",
"0x%Lx is an ambiguous request identifier\n",
(unsigned long long)qtcb->bottom.support.req_handle);
zfcp_erp_adapter_shutdown(adapter, 0, 78, req);
break;
......@@ -479,9 +432,7 @@ static void zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *req)
break;
default:
dev_err(&adapter->ccw_device->dev,
"Transfer protocol status information"
"provided by the adapter (0x%x) "
"is not compatible with the device driver.\n",
"0x%x is not a valid transfer protocol status\n",
qtcb->prefix.prot_status);
zfcp_erp_adapter_shutdown(adapter, 0, 119, req);
}
......@@ -559,33 +510,17 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
adapter->peer_wwpn = bottom->plogi_payload.wwpn;
adapter->peer_wwnn = bottom->plogi_payload.wwnn;
fc_host_port_type(shost) = FC_PORTTYPE_PTP;
if (req->erp_action)
dev_info(&adapter->ccw_device->dev,
"Point-to-Point fibrechannel "
"configuration detected.\n");
break;
case FSF_TOPO_FABRIC:
fc_host_port_type(shost) = FC_PORTTYPE_NPORT;
if (req->erp_action)
dev_info(&adapter->ccw_device->dev,
"Switched fabric fibrechannel "
"network detected.\n");
break;
case FSF_TOPO_AL:
fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
dev_err(&adapter->ccw_device->dev,
"Unsupported arbitrated loop fibrechannel "
"topology detected, shutting down "
"adapter.\n");
zfcp_erp_adapter_shutdown(adapter, 0, 127, req);
return -EIO;
default:
fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN;
dev_err(&adapter->ccw_device->dev,
"The fibrechannel topology reported by the"
" adapter is not known by the zfcp driver,"
" shutting down adapter.\n");
zfcp_erp_adapter_shutdown(adapter, 0, 128, req);
"Unknown or unsupported arbitrated loop "
"fibre channel topology detected\n");
zfcp_erp_adapter_shutdown(adapter, 0, 127, req);
return -EIO;
}
......@@ -616,11 +551,9 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req)
if (bottom->max_qtcb_size < sizeof(struct fsf_qtcb)) {
dev_err(&adapter->ccw_device->dev,
"Maximum QTCB size (%d bytes) allowed by "
"the adapter is lower than the minimum "
"required by the driver (%ld bytes).\n",
bottom->max_qtcb_size,
sizeof(struct fsf_qtcb));
"FCP adapter maximum QTCB size (%d bytes) "
"is too small\n",
bottom->max_qtcb_size);
zfcp_erp_adapter_shutdown(adapter, 0, 129, req);
return;
}
......@@ -656,15 +589,15 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req)
if (FSF_QTCB_CURRENT_VERSION < bottom->low_qtcb_version) {
dev_err(&adapter->ccw_device->dev,
"The adapter only supports newer control block "
"versions, try updated device driver.\n");
"The FCP adapter only supports newer "
"control block versions\n");
zfcp_erp_adapter_shutdown(adapter, 0, 125, req);
return;
}
if (FSF_QTCB_CURRENT_VERSION > bottom->high_qtcb_version) {
dev_err(&adapter->ccw_device->dev,
"The adapter only supports older control block "
"versions, consider a microcode upgrade.\n");
"The FCP adapter only supports older "
"control block versions\n");
zfcp_erp_adapter_shutdown(adapter, 0, 126, req);
}
}
......@@ -1463,9 +1396,8 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
break;
case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED:
dev_warn(&req->adapter->ccw_device->dev,
"The adapter is out of resources. The remote port "
"0x%016Lx could not be opened, disabling it.\n",
port->wwpn);
"Not enough FCP adapter resources to open "
"remote port 0x%016Lx\n", port->wwpn);
zfcp_erp_port_failed(port, 31, req);
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
......@@ -1477,8 +1409,8 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
break;
case FSF_SQ_NO_RETRY_POSSIBLE:
dev_warn(&req->adapter->ccw_device->dev,
"The remote port 0x%016Lx could not be "
"opened. Disabling it.\n", port->wwpn);
"Remote port 0x%016Lx could not be opened\n",
port->wwpn);
zfcp_erp_port_failed(port, 32, req);
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
......@@ -1784,14 +1716,12 @@ static void zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *req)
case FSF_LUN_SHARING_VIOLATION:
if (header->fsf_status_qual.word[0])
dev_warn(&adapter->ccw_device->dev,
"FCP-LUN 0x%Lx at the remote port "
"with WWPN 0x%Lx "
"connected to the adapter "
"is already in use in LPAR%d, CSS%d.\n",
"LUN 0x%Lx on port 0x%Lx is already in "
"use by CSS%d, MIF Image ID %x\n",
unit->fcp_lun,
unit->port->wwpn,
queue_designator->hla,
queue_designator->cssid);
queue_designator->cssid,
queue_designator->hla);
else
zfcp_act_eval_err(adapter,
header->fsf_status_qual.word[2]);
......@@ -1802,8 +1732,8 @@ static void zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *req)
break;
case FSF_MAXIMUM_NUMBER_OF_LUNS_EXCEEDED:
dev_warn(&adapter->ccw_device->dev,
"The adapter ran out of resources. There is no "
"handle available for unit 0x%016Lx on port 0x%016Lx.",
"No handle is available for LUN "
"0x%016Lx on port 0x%016Lx\n",
unit->fcp_lun, unit->port->wwpn);
zfcp_erp_unit_failed(unit, 34, req);
/* fall through */
......@@ -1841,25 +1771,25 @@ static void zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *req)
atomic_set_mask(ZFCP_STATUS_UNIT_READONLY,
&unit->status);
dev_info(&adapter->ccw_device->dev,
"Read-only access for unit 0x%016Lx "
"on port 0x%016Lx.\n",
"SCSI device at LUN 0x%016Lx on port "
"0x%016Lx opened read-only\n",
unit->fcp_lun, unit->port->wwpn);
}
if (exclusive && !readwrite) {
dev_err(&adapter->ccw_device->dev,
"Exclusive access of read-only unit "
"0x%016Lx on port 0x%016Lx not "
"supported, disabling unit.\n",
"Exclusive read-only access not "
"supported (unit 0x%016Lx, "
"port 0x%016Lx)\n",
unit->fcp_lun, unit->port->wwpn);
zfcp_erp_unit_failed(unit, 35, req);
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
zfcp_erp_unit_shutdown(unit, 0, 80, req);
} else if (!exclusive && readwrite) {
dev_err(&adapter->ccw_device->dev,
"Shared access of read-write unit "
"0x%016Lx on port 0x%016Lx not "
"supported, disabling unit.\n",
"Shared read-write access not "
"supported (unit 0x%016Lx, port "
"0x%016Lx\n)",
unit->fcp_lun, unit->port->wwpn);
zfcp_erp_unit_failed(unit, 36, req);
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
......@@ -2166,9 +2096,8 @@ static void zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *req)
break;
case FSF_DIRECTION_INDICATOR_NOT_VALID:
dev_err(&req->adapter->ccw_device->dev,
"Invalid data direction (%d) given for unit "
"0x%016Lx on port 0x%016Lx, shutting down "
"adapter.\n",
"Incorrect direction %d, unit 0x%016Lx on port "
"0x%016Lx closed\n",
req->qtcb->bottom.io.data_direction,
unit->fcp_lun, unit->port->wwpn);
zfcp_erp_adapter_shutdown(unit->port->adapter, 0, 133, req);
......@@ -2176,9 +2105,8 @@ static void zfcp_fsf_send_fcp_command_handler(struct zfcp_fsf_req *req)
break;
case FSF_CMND_LENGTH_NOT_VALID:
dev_err(&req->adapter->ccw_device->dev,
"An invalid control-data-block length field (%d) "
"was found in a command for unit 0x%016Lx on port "
"0x%016Lx. Shutting down adapter.\n",
"Incorrect CDB length %d, unit 0x%016Lx on "
"port 0x%016Lx closed\n",
req->qtcb->bottom.io.fcp_cmnd_length,
unit->fcp_lun, unit->port->wwpn);
zfcp_erp_adapter_shutdown(unit->port->adapter, 0, 134, req);
......@@ -2306,10 +2234,9 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter,
retval = -EIO;
else {
dev_err(&adapter->ccw_device->dev,
"SCSI request too large. "
"Shutting down unit 0x%016Lx on port "
"0x%016Lx.\n", unit->fcp_lun,
unit->port->wwpn);
"Oversize data package, unit 0x%016Lx "
"on port 0x%016Lx closed\n",
unit->fcp_lun, unit->port->wwpn);
zfcp_erp_unit_shutdown(unit, 0, 131, req);
retval = -EINVAL;
}
......
drivers/s390/scsi/zfcp_qdio.c
浏览文件 @ ff3b24fa
......@@ -57,7 +57,7 @@ void zfcp_qdio_free(struct zfcp_adapter *adapter)
static void zfcp_qdio_handler_error(struct zfcp_adapter *adapter, u8 id)
{
dev_warn(&adapter->ccw_device->dev, "QDIO problem occurred.\n");
dev_warn(&adapter->ccw_device->dev, "A QDIO problem occurred\n");
zfcp_erp_adapter_reopen(adapter,
ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED |
......@@ -174,8 +174,8 @@ static void zfcp_qdio_int_resp(struct ccw_device *cdev, unsigned int qdio_err,
if (unlikely(!(sbale->flags & SBAL_FLAGS_LAST_ENTRY)))
dev_warn(&adapter->ccw_device->dev,
"Protocol violation by adapter. "
"Continuing operations.\n");
"A QDIO protocol error occurred, "
"operations continue\n");
}
/*
......@@ -457,17 +457,11 @@ int zfcp_qdio_open(struct zfcp_adapter *adapter)
if (atomic_test_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status))
return -EIO;
if (qdio_establish(&adapter->qdio_init_data)) {
dev_err(&adapter->ccw_device->dev,
"Establish of QDIO queues failed.\n");
return -EIO;
}
if (qdio_establish(&adapter->qdio_init_data))
goto failed_establish;
if (qdio_activate(adapter->ccw_device)) {
dev_err(&adapter->ccw_device->dev,
"Activate of QDIO queues failed.\n");
if (qdio_activate(adapter->ccw_device))
goto failed_qdio;
}
for (cc = 0; cc < QDIO_MAX_BUFFERS_PER_Q; cc++) {
sbale = &(adapter->resp_q.sbal[cc]->element[0]);
......@@ -477,11 +471,8 @@ int zfcp_qdio_open(struct zfcp_adapter *adapter)
}
if (do_QDIO(adapter->ccw_device, QDIO_FLAG_SYNC_INPUT, 0, 0,
QDIO_MAX_BUFFERS_PER_Q)) {
dev_err(&adapter->ccw_device->dev,
"Init of QDIO response queue failed.\n");
QDIO_MAX_BUFFERS_PER_Q))
goto failed_qdio;
}
/* set index of first avalable SBALS / number of available SBALS */
adapter->req_q.first = 0;
......@@ -492,5 +483,8 @@ int zfcp_qdio_open(struct zfcp_adapter *adapter)
failed_qdio:
qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR);
failed_establish:
dev_err(&adapter->ccw_device->dev,
"Setting up the QDIO connection to the FCP adapter failed\n");
return -EIO;
}
drivers/s390/scsi/zfcp_scsi.c
浏览文件 @ ff3b24fa
......@@ -294,7 +294,8 @@ int zfcp_adapter_scsi_register(struct zfcp_adapter *adapter)
sizeof (struct zfcp_adapter *));
if (!adapter->scsi_host) {
dev_err(&adapter->ccw_device->dev,
"registration with SCSI stack failed.");
"Registering the FCP device with the "
"SCSI stack failed\n");
return -EIO;
}
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或