pcmcia: IOCARD is also required for using IRQs

Dave Hinds pointed out to me that 37979e15 will break b43 and
ray_cs, as IOCARD is not -- as the name would suggest -- only needed
for cards using IO ports. Instead, as it re-deines several pins, it
is also required for using interrupts.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

drivers/pcmcia/pcmcia_resource.c

@@ -514,7 +514,9 @@ int pcmcia_enable_device(struct pcmcia_device *p_dev)
 	}
 
 	/* Pick memory or I/O card, DMA mode, interrupt */
-	if (p_dev->_io)
+	if (p_dev->_io || flags & CONF_ENABLE_IRQ)
+		flags |= CONF_ENABLE_IOCARD;
+	if (flags & CONF_ENABLE_IOCARD)
 		s->socket.flags |= SS_IOCARD;
 	if (flags & CONF_ENABLE_SPKR) {
 		s->socket.flags |= SS_SPKR_ENA;

include/pcmcia/ds.h

@@ -259,6 +259,8 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev);
 #define CONF_ENABLE_SPKR        0x0002
 #define CONF_ENABLE_PULSE_IRQ   0x0004
 #define CONF_ENABLE_ESR         0x0008
+#define CONF_ENABLE_IOCARD	0x0010 /* auto-enabled if IO resources or IRQ
+					* (CONF_ENABLE_IRQ) in use */
 
 /* flags used by pcmcia_loop_config() autoconfiguration */
 #define CONF_AUTO_CHECK_VCC	0x0100 /* check for matching Vcc? */