Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits)
  [ARM] Fix virtual to physical translation macro corner cases
  [ARM] update mach-types
  [ARM] 5421/1: ftrace: fix crash due to tracing of __naked functions
  MX1 fix include
  [ARM] 5419/1: ep93xx: fix build warnings about struct i2c_board_info
  [ARM] 5418/1: restore lr before leaving mcount
  ARM: OMAP: board-omap3beagle: set i2c-3 to 100kHz
  ARM: OMAP: Allow I2C bus driver to be compiled as a module
  ARM: OMAP: sched_clock() corrected
  ARM: OMAP: Fix compile error if pm.h is included
  [ARM] orion5x: pass dram mbus data to xor driver
  [ARM] S3C64XX: Fix s3c64xx_setrate_clksrc
  [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/irq.c
  [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/s3c6400-clock.c
  [ARM] S3C64XX: Fix USB host clock mux list
  [ARM] S3C64XX: Fix name of USB host clock.
  [ARM] S3C64XX: Rename IRQ_UHOST to IRQ_USBH
  [ARM] S3C64XX: Do gpiolib configuration earlier
  [ARM] S3C64XX: Staticise s3c64xx_init_irq_eint()
  [ARM] SMDK6410: Declare iodesc table static
  ...

arch/arm/kernel/entry-common.S

@@ -111,6 +111,7 @@ ENTRY(mcount)
 	.globl mcount_call
 mcount_call:
 	bl ftrace_stub
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 ENTRY(ftrace_caller)
@@ -122,6 +123,7 @@ ENTRY(ftrace_caller)
 	.globl ftrace_call
 ftrace_call:
 	bl ftrace_stub
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 #else
@@ -133,6 +135,7 @@ ENTRY(mcount)
 	adr r0, ftrace_stub
 	cmp r0, r2
 	bne trace
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 trace:
@@ -141,6 +144,7 @@ trace:
 	sub r0, r0, #MCOUNT_INSN_SIZE
 	mov lr, pc
 	mov pc, r2
+	mov lr, r1				@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 #endif /* CONFIG_DYNAMIC_FTRACE */

arch/arm/kernel/fiq.c

@@ -88,7 +88,7 @@ void set_fiq_handler(void *start, unsigned int length)
  * disable irqs for the duration.  Note - these functions are almost
  * entirely coded in assembly.
  */
-void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
+void __naked set_fiq_regs(struct pt_regs *regs)
 {
 	register unsigned long tmp;
 	asm volatile (
@@ -106,7 +106,7 @@ void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
 	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
 }
 
-void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs)
+void __naked get_fiq_regs(struct pt_regs *regs)
 {
 	register unsigned long tmp;
 	asm volatile (

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -4,6 +4,8 @@
 
 #ifndef __ASSEMBLY__
 
+struct i2c_board_info;
+
 struct ep93xx_eth_data
 {
 	unsigned char	dev_addr[6];

arch/arm/mach-mx1/devices.c

@@ -23,6 +23,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 
 static struct resource imx_csi_resources[] = {

arch/arm/mach-mx1/mx1ads.c

@@ -21,6 +21,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>

arch/arm/mach-omap2/board-omap3beagle.c

@@ -178,7 +178,9 @@ static int __init omap3_beagle_i2c_init(void)
 #ifdef CONFIG_I2C2_OMAP_BEAGLE
 	omap_register_i2c_bus(2, 400, NULL, 0);
 #endif
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz */
+	omap_register_i2c_bus(3, 100, NULL, 0);
 	return 0;
 }
 

arch/arm/mach-orion5x/common.c

@@ -431,6 +431,10 @@ void __init orion5x_uart1_init(void)
 /*****************************************************************************
  * XOR engine
  ****************************************************************************/
+struct mv_xor_platform_shared_data orion5x_xor_shared_data = {
+	.dram		= &orion5x_mbus_dram_info,
+};
+
 static struct resource orion5x_xor_shared_resources[] = {
 	{
 		.name	= "xor low",
@@ -448,6 +452,9 @@ static struct resource orion5x_xor_shared_resources[] = {
 static struct platform_device orion5x_xor_shared = {
 	.name		= MV_XOR_SHARED_NAME,
 	.id		= 0,
+	.dev		= {
+		.platform_data	= &orion5x_xor_shared_data,
+	},
 	.num_resources	= ARRAY_SIZE(orion5x_xor_shared_resources),
 	.resource	= orion5x_xor_shared_resources,
 };

arch/arm/mach-s3c6410/mach-smdk6410.c

@@ -129,7 +129,7 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };
 
-struct map_desc smdk6410_iodesc[] = {};
+static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
 #ifdef CONFIG_SMDK6410_SD_CH0
@@ -146,7 +146,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 
 static struct i2c_board_info i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },
-	{ I2C_BOARD_INFO("WM8580", 0X1b), },
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
 };
 
 static struct i2c_board_info i2c_devs1[] __initdata = {

arch/arm/mm/copypage-feroceon.c

@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 
-static void __attribute__((naked))
+static void __naked
 feroceon_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\

arch/arm/mm/copypage-v3.c

@@ -15,7 +15,7 @@
  *
  * FIXME: do we need to handle cache stuff...
  */
-static void __attribute__((naked))
+static void __naked
 v3_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\n\

arch/arm/mm/copypage-v4mc.c

@@ -44,7 +44,7 @@ static DEFINE_SPINLOCK(minicache_lock);
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __attribute__((naked))
+static void __naked
 mc_copy_user_page(void *from, void *to)
 {
 	asm volatile(

arch/arm/mm/copypage-v4wb.c

@@ -22,7 +22,7 @@
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __attribute__((naked))
+static void __naked
 v4wb_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\

arch/arm/mm/copypage-v4wt.c

@@ -20,7 +20,7 @@
  * dirty data in the cache.  However, we do have to ensure that
  * subsequent reads are up to date.
  */
-static void __attribute__((naked))
+static void __naked
 v4wt_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\

arch/arm/mm/copypage-xsc3.c

@@ -29,7 +29,7 @@
  * if we eventually end up using our copied page.
  *
  */
-static void __attribute__((naked))
+static void __naked
 xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\

arch/arm/mm/copypage-xscale.c

@@ -42,7 +42,7 @@ static DEFINE_SPINLOCK(minicache_lock);
  * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
  * and merged as appropriate.
  */
-static void __attribute__((naked))
+static void __naked
 mc_copy_user_page(void *from, void *to)
 {
 	/*

arch/arm/mm/dma-mapping.c

@@ -490,26 +490,30 @@ core_initcall(consistent_init);
  */
 void dma_cache_maint(const void *start, size_t size, int direction)
 {
-	const void *end = start + size;
+	void (*inner_op)(const void *, const void *);
+	void (*outer_op)(unsigned long, unsigned long);
 
-	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
+	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
 
 	switch (direction) {
 	case DMA_FROM_DEVICE:		/* invalidate only */
-		dmac_inv_range(start, end);
-		outer_inv_range(__pa(start), __pa(end));
+		inner_op = dmac_inv_range;
+		outer_op = outer_inv_range;
 		break;
 	case DMA_TO_DEVICE:		/* writeback only */
-		dmac_clean_range(start, end);
-		outer_clean_range(__pa(start), __pa(end));
+		inner_op = dmac_clean_range;
+		outer_op = outer_clean_range;
 		break;
 	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
-		dmac_flush_range(start, end);
-		outer_flush_range(__pa(start), __pa(end));
+		inner_op = dmac_flush_range;
+		outer_op = outer_flush_range;
 		break;
 	default:
 		BUG();
 	}
+
+	inner_op(start, start + size);
+	outer_op(__pa(start), __pa(start) + size);
 }
 EXPORT_SYMBOL(dma_cache_maint);
 

arch/arm/mm/init.c

@@ -382,7 +382,7 @@ void __init bootmem_init(void)
 	for_each_node(node)
 		bootmem_free_node(node, mi);
 
-	high_memory = __va(memend_pfn << PAGE_SHIFT);
+	high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
 
 	/*
 	 * This doesn't seem to be used by the Linux memory manager any

arch/arm/mm/mmap.c

@@ -124,7 +124,7 @@ int valid_phys_addr_range(unsigned long addr, size_t size)
 {
 	if (addr < PHYS_OFFSET)
 		return 0;
-	if (addr + size > __pa(high_memory))
+	if (addr + size >= __pa(high_memory - 1))
 		return 0;
 
 	return 1;

arch/arm/plat-omap/Makefile

@@ -18,7 +18,8 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
-obj-$(CONFIG_I2C_OMAP) += i2c.o
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)
 
 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o

arch/arm/plat-omap/common.c

@@ -199,21 +199,17 @@ static struct clocksource clocksource_32k = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-/*
- * Rounds down to nearest nsec.
- */
-unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
-{
-	return cyc2ns(&clocksource_32k, ticks_32k);
-}
-
 /*
  * Returns current time from boot in nsecs. It's OK for this to wrap
  * around for now, as it's just a relative time stamp.
  */
 unsigned long long sched_clock(void)
 {
-	return omap_32k_ticks_to_nsecs(omap_32k_read());
+	unsigned long long ret;
+
+	ret = (unsigned long long)omap_32k_read();
+	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
+	return ret;
 }
 
 static int __init omap_init_clocksource_32k(void)

arch/arm/plat-omap/include/mach/common.h

@@ -35,7 +35,7 @@ extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 extern void omap_serial_init(void);
 extern void omap_serial_enable_clocks(int enable);
-#ifdef CONFIG_I2C_OMAP
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
 				 struct i2c_board_info const *info,
 				 unsigned len);

arch/arm/plat-omap/include/mach/pm.h

@@ -108,7 +108,7 @@
 	!defined(CONFIG_ARCH_OMAP15XX) && \
 	!defined(CONFIG_ARCH_OMAP16XX) && \
 	!defined(CONFIG_ARCH_OMAP24XX)
-#error "Power management for this processor not implemented yet"
+#warning "Power management for this processor not implemented yet"
 #endif
 
 #ifndef __ASSEMBLER__

arch/arm/plat-s3c64xx/clock.c

@@ -248,7 +248,7 @@ static struct clk *clks[] __initdata = {
 	&clk_48m,
 };
 
-void s3c64xx_register_clocks(void)
+void __init s3c64xx_register_clocks(void)
 {
 	struct clk *clkp;
 	int ret;

arch/arm/plat-s3c64xx/gpiolib.c

@@ -417,4 +417,4 @@ static __init int s3c64xx_gpiolib_init(void)
 	return 0;
 }
 
-arch_initcall(s3c64xx_gpiolib_init);
+core_initcall(s3c64xx_gpiolib_init);

arch/arm/plat-s3c64xx/include/plat/irqs.h

@@ -117,7 +117,7 @@
 #define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
 #define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
 #define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
-#define IRQ_UHOST		S3C64XX_IRQ_VIC1(15)
+#define IRQ_USBH		S3C64XX_IRQ_VIC1(15)
 #define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
 #define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
 #define IRQ_IIC			S3C64XX_IRQ_VIC1(18)

arch/arm/plat-s3c64xx/irq-eint.c

@@ -14,12 +14,15 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
 #include <asm/hardware/vic.h>
 
 #include <plat/regs-irqtype.h>
+#include <plat/regs-gpio.h>
+#include <plat/gpio-cfg.h>
 
 #include <mach/map.h>
 #include <plat/cpu.h>
@@ -74,6 +77,7 @@ static void s3c_irq_eint_maskack(unsigned int irq)
 static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 {
 	int offs = eint_offset(irq);
+	int pin;
 	int shift;
 	u32 ctrl, mask;
 	u32 newvalue = 0;
@@ -125,6 +129,15 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 	ctrl |= newvalue << shift;
 	__raw_writel(ctrl, reg);
 
+	/* set the GPIO pin appropriately */
+
+	if (offs < 23)
+		pin = S3C64XX_GPN(offs);
+	else
+		pin = S3C64XX_GPM(offs - 23);
+
+	s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+
 	return 0;
 }
 
@@ -181,7 +194,7 @@ static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
 	s3c_irq_demux_eint(20, 27);
 }
 
-int __init s3c64xx_init_irq_eint(void)
+static int __init s3c64xx_init_irq_eint(void)
 {
 	int irq;
 

arch/arm/plat-s3c64xx/irq.c

@@ -207,7 +207,7 @@ static struct irq_chip s3c_irq_uart = {
 
 static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
 {
-	void *reg_base = uirq->regs;
+	void __iomem *reg_base = uirq->regs;
 	unsigned int irq;
 	int offs;
 

arch/arm/plat-s3c64xx/s3c6400-clock.c

@@ -36,7 +36,7 @@
  * ext_xtal_mux for want of an actual name from the manual.
 */
 
-struct clk clk_ext_xtal_mux = {
+static struct clk clk_ext_xtal_mux = {
 	.name		= "ext_xtal",
 	.id		= -1,
 };
@@ -63,7 +63,7 @@ struct clksrc_clk {
 	void __iomem		*reg_divider;
 };
 
-struct clk clk_fout_apll = {
+static struct clk clk_fout_apll = {
 	.name		= "fout_apll",
 	.id		= -1,
 };
@@ -78,7 +78,7 @@ static struct clk_sources clk_src_apll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
 };
 
-struct clksrc_clk clk_mout_apll = {
+static struct clksrc_clk clk_mout_apll = {
 	.clk	= {
 		.name		= "mout_apll",
 		.id		= -1,
@@ -88,7 +88,7 @@ struct clksrc_clk clk_mout_apll = {
 	.sources	= &clk_src_apll,
 };
 
-struct clk clk_fout_epll = {
+static struct clk clk_fout_epll = {
 	.name		= "fout_epll",
 	.id		= -1,
 };
@@ -103,7 +103,7 @@ static struct clk_sources clk_src_epll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
 };
 
-struct clksrc_clk clk_mout_epll = {
+static struct clksrc_clk clk_mout_epll = {
 	.clk	= {
 		.name		= "mout_epll",
 		.id		= -1,
@@ -123,7 +123,7 @@ static struct clk_sources clk_src_mpll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
 };
 
-struct clksrc_clk clk_mout_mpll = {
+static struct clksrc_clk clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 		.id		= -1,
@@ -145,7 +145,7 @@ static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
 	return rate;
 }
 
-struct clk clk_dout_mpll = {
+static struct clk clk_dout_mpll = {
 	.name		= "dout_mpll",
 	.id		= -1,
 	.parent		= &clk_mout_mpll.clk,
@@ -189,10 +189,10 @@ static struct clk_sources clkset_uart = {
 };
 
 static struct clk *clkset_uhost_list[] = {
+	&clk_48m,
 	&clk_mout_epll.clk,
 	&clk_dout_mpll,
 	&clk_fin_epll,
-	&clk_48m,
 };
 
 static struct clk_sources clkset_uhost = {
@@ -239,10 +239,12 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
 
 	rate = clk_round_rate(clk, rate);
 	div = clk_get_rate(clk->parent) / rate;
+	if (div > 16)
+		return -EINVAL;
 
 	val = __raw_readl(reg);
-	val &= ~sclk->mask;
-	val |= (rate - 1) << sclk->shift;
+	val &= ~(0xf << sclk->shift);
+	val |= (div - 1) << sclk->shift;
 	__raw_writel(val, reg);
 
 	return 0;
@@ -351,7 +353,7 @@ static struct clksrc_clk clk_mmc2 = {
 
 static struct clksrc_clk clk_usbhost = {
 	.clk	= {
-		.name		= "usb-host-bus",
+		.name		= "usb-bus-host",
 		.id		= -1,
 		.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
 		.enable		= s3c64xx_sclk_ctrl,

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sun Nov 30 16:39:36 2008
+# Last update: Thu Mar 12 18:01:45 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1811,7 +1811,7 @@ pilz_pmi5		MACH_PILZ_PMI5		PILZ_PMI5		1820
 jade			MACH_JADE		JADE			1821
 ks8695_softplc		MACH_KS8695_SOFTPLC	KS8695_SOFTPLC		1822
 gprisc3			MACH_GPRISC3		GPRISC3			1823
-stamp9260		MACH_STAMP9260		STAMP9260		1824
+stamp9g20		MACH_STAMP9G20		STAMP9G20		1824
 smdk6430		MACH_SMDK6430		SMDK6430		1825
 smdkc100		MACH_SMDKC100		SMDKC100		1826
 tavorevb		MACH_TAVOREVB		TAVOREVB		1827
@@ -1993,4 +1993,134 @@ spark			MACH_SPARK		SPARK			2002
 benzina			MACH_BENZINA		BENZINA			2003
 blaze			MACH_BLAZE		BLAZE			2004
 linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
-htcvenus		MACH_HTCVENUS		HTCVENUS		2006
+htckovsky		MACH_HTCVENUS		HTCVENUS		2006
+sony_prs505		MACH_SONY_PRS505	SONY_PRS505		2007
+hanlin_v3		MACH_HANLIN_V3		HANLIN_V3		2008
+sapphira		MACH_SAPPHIRA		SAPPHIRA		2009
+dack_sda_01		MACH_DACK_SDA_01	DACK_SDA_01		2010
+armbox			MACH_ARMBOX		ARMBOX			2011
+harris_rvp		MACH_HARRIS_RVP		HARRIS_RVP		2012
+ribaldo			MACH_RIBALDO		RIBALDO			2013
+agora			MACH_AGORA		AGORA			2014
+omap3_mini		MACH_OMAP3_MINI		OMAP3_MINI		2015
+a9sam6432_b		MACH_A9SAM6432_B	A9SAM6432_B		2016
+usg2410			MACH_USG2410		USG2410			2017
+pc72052_i10_revb	MACH_PC72052_I10_REVB	PC72052_I10_REVB	2018
+mx35_exm32		MACH_MX35_EXM32		MX35_EXM32		2019
+topas910		MACH_TOPAS910		TOPAS910		2020
+hyena			MACH_HYENA		HYENA			2021
+pospax			MACH_POSPAX		POSPAX			2022
+hdl_gx			MACH_HDL_GX		HDL_GX			2023
+ctera_4bay		MACH_CTERA_4BAY		CTERA_4BAY		2024
+ctera_plug_c		MACH_CTERA_PLUG_C	CTERA_PLUG_C		2025
+crwea_plug_i		MACH_CRWEA_PLUG_I	CRWEA_PLUG_I		2026
+egauge2			MACH_EGAUGE2		EGAUGE2			2027
+didj			MACH_DIDJ		DIDJ			2028
+m_s3c2443		MACH_MEISTER		MEISTER			2029
+htcblackstone		MACH_HTCBLACKSTONE	HTCBLACKSTONE		2030
+cpuat9g20		MACH_CPUAT9G20		CPUAT9G20		2031
+smdk6440		MACH_SMDK6440		SMDK6440		2032
+omap_35xx_mvp		MACH_OMAP_35XX_MVP	OMAP_35XX_MVP		2033
+ctera_plug_i		MACH_CTERA_PLUG_I	CTERA_PLUG_I		2034
+pvg610_100		MACH_PVG610		PVG610			2035
+hprw6815		MACH_HPRW6815		HPRW6815		2036
+omap3_oswald		MACH_OMAP3_OSWALD	OMAP3_OSWALD		2037
+nas4220b		MACH_NAS4220B		NAS4220B		2038
+htcraphael_cdma		MACH_HTCRAPHAEL_CDMA	HTCRAPHAEL_CDMA		2039
+htcdiamond_cdma		MACH_HTCDIAMOND_CDMA	HTCDIAMOND_CDMA		2040
+scaler			MACH_SCALER		SCALER			2041
+zylonite2		MACH_ZYLONITE2		ZYLONITE2		2042
+aspenite		MACH_ASPENITE		ASPENITE		2043
+teton			MACH_TETON		TETON			2044
+ttc_dkb			MACH_TTC_DKB		TTC_DKB			2045
+bishop2			MACH_BISHOP2		BISHOP2			2046
+ippv5			MACH_IPPV5		IPPV5			2047
+farm926			MACH_FARM926		FARM926			2048
+mmccpu			MACH_MMCCPU		MMCCPU			2049
+sgmsfl			MACH_SGMSFL		SGMSFL			2050
+tt8000			MACH_TT8000		TT8000			2051
+zrn4300lp		MACH_ZRN4300LP		ZRN4300LP		2052
+mptc			MACH_MPTC		MPTC			2053
+h6051			MACH_H6051		H6051			2054
+pvg610_101		MACH_PVG610_101		PVG610_101		2055
+stamp9261_pc_evb	MACH_STAMP9261_PC_EVB	STAMP9261_PC_EVB	2056
+pelco_odysseus		MACH_PELCO_ODYSSEUS	PELCO_ODYSSEUS		2057
+tny_a9260		MACH_TNY_A9260		TNY_A9260		2058
+tny_a9g20		MACH_TNY_A9G20		TNY_A9G20		2059
+aesop_mp2530f		MACH_AESOP_MP2530F	AESOP_MP2530F		2060
+dx900			MACH_DX900		DX900			2061
+cpodc2			MACH_CPODC2		CPODC2			2062
+tilt_8925		MACH_TILT_8925		TILT_8925		2063
+davinci_dm357_evm	MACH_DAVINCI_DM357_EVM	DAVINCI_DM357_EVM	2064
+swordfish		MACH_SWORDFISH		SWORDFISH		2065
+corvus			MACH_CORVUS		CORVUS			2066
+taurus			MACH_TAURUS		TAURUS			2067
+axm			MACH_AXM		AXM			2068
+axc			MACH_AXC		AXC			2069
+baby			MACH_BABY		BABY			2070
+mp200			MACH_MP200		MP200			2071
+pcm043			MACH_PCM043		PCM043			2072
+hanlin_v3c		MACH_HANLIN_V3C		HANLIN_V3C		2073
+kbk9g20			MACH_KBK9G20		KBK9G20			2074
+adsturbog5		MACH_ADSTURBOG5		ADSTURBOG5		2075
+avenger_lite1		MACH_AVENGER_LITE1	AVENGER_LITE1		2076
+suc82x			MACH_SUC		SUC			2077
+at91sam7s256		MACH_AT91SAM7S256	AT91SAM7S256		2078
+mendoza			MACH_MENDOZA		MENDOZA			2079
+kira			MACH_KIRA		KIRA			2080
+mx1hbm			MACH_MX1HBM		MX1HBM			2081
+quatro43xx		MACH_QUATRO43XX		QUATRO43XX		2082
+quatro4230		MACH_QUATRO4230		QUATRO4230		2083
+nsb400			MACH_NSB400		NSB400			2084
+drp255			MACH_DRP255		DRP255			2085
+thoth			MACH_THOTH		THOTH			2086
+firestone		MACH_FIRESTONE		FIRESTONE		2087
+asusp750		MACH_ASUSP750		ASUSP750		2088
+ctera_dl		MACH_CTERA_DL		CTERA_DL		2089
+socr			MACH_SOCR		SOCR			2090
+htcoxygen		MACH_HTCOXYGEN		HTCOXYGEN		2091
+heroc			MACH_HEROC		HEROC			2092
+zeno6800		MACH_ZENO6800		ZENO6800		2093
+sc2mcs			MACH_SC2MCS		SC2MCS			2094
+gene100			MACH_GENE100		GENE100			2095
+as353x			MACH_AS353X		AS353X			2096
+sheevaplug		MACH_SHEEVAPLUG		SHEEVAPLUG		2097
+at91sam9g20		MACH_AT91SAM9G20	AT91SAM9G20		2098
+mv88f6192gtw_fe		MACH_MV88F6192GTW_FE	MV88F6192GTW_FE		2099
+cc9200			MACH_CC9200		CC9200			2100
+sm9200			MACH_SM9200		SM9200			2101
+tp9200			MACH_TP9200		TP9200			2102
+snapperdv		MACH_SNAPPERDV		SNAPPERDV		2103
+avengers_lite		MACH_AVENGERS_LITE	AVENGERS_LITE		2104
+avengers_lite1		MACH_AVENGERS_LITE1	AVENGERS_LITE1		2105
+omap3axon		MACH_OMAP3AXON		OMAP3AXON		2106
+ma8xx			MACH_MA8XX		MA8XX			2107
+mp201ek			MACH_MP201EK		MP201EK			2108
+davinci_tux		MACH_DAVINCI_TUX	DAVINCI_TUX		2109
+mpa1600			MACH_MPA1600		MPA1600			2110
+pelco_troy		MACH_PELCO_TROY		PELCO_TROY		2111
+nsb667			MACH_NSB667		NSB667			2112
+rovers5_4mpix		MACH_ROVERS5_4MPIX	ROVERS5_4MPIX		2113
+twocom			MACH_TWOCOM		TWOCOM			2114
+ubisys_p9_rcu3r2	MACH_UBISYS_P9_RCU3R2	UBISYS_P9_RCU3R2	2115
+hero_espresso		MACH_HERO_ESPRESSO	HERO_ESPRESSO		2116
+afeusb			MACH_AFEUSB		AFEUSB			2117
+t830			MACH_T830		T830			2118
+spd8020_cc		MACH_SPD8020_CC		SPD8020_CC		2119
+om_3d7k			MACH_OM_3D7K		OM_3D7K			2120
+picocom2		MACH_PICOCOM2		PICOCOM2		2121
+uwg4mx27		MACH_UWG4MX27		UWG4MX27		2122
+uwg4mx31		MACH_UWG4MX31		UWG4MX31		2123
+cherry			MACH_CHERRY		CHERRY			2124
+mx51_babbage		MACH_MX51_BABBAGE	MX51_BABBAGE		2125
+s3c2440turkiye		MACH_S3C2440TURKIYE	S3C2440TURKIYE		2126
+tx37			MACH_TX37		TX37			2127
+sbc2800_9g20		MACH_SBC2800_9G20	SBC2800_9G20		2128
+benzglb			MACH_BENZGLB		BENZGLB			2129
+benztd			MACH_BENZTD		BENZTD			2130
+cartesio_plus		MACH_CARTESIO_PLUS	CARTESIO_PLUS		2131
+solrad_g20		MACH_SOLRAD_G20		SOLRAD_G20		2132
+mx27wallace		MACH_MX27WALLACE	MX27WALLACE		2133
+fmzwebmodul		MACH_FMZWEBMODUL	FMZWEBMODUL		2134
+rd78x00_masa		MACH_RD78X00_MASA	RD78X00_MASA		2135
+smallogger		MACH_SMALLOGGER		SMALLOGGER		2136

include/linux/compiler-gcc.h

@@ -52,7 +52,15 @@
 #define __deprecated			__attribute__((deprecated))
 #define __packed			__attribute__((packed))
 #define __weak				__attribute__((weak))
-#define __naked				__attribute__((naked))
+
+/*
+ * it doesn't make sense on ARM (currently the only user of __naked) to trace
+ * naked functions because then mcount is called without stack and frame pointer
+ * being set up and there is no chance to restore the lr register to the value
+ * before mcount was called.
+ */
+#define __naked				__attribute__((naked)) notrace
+
 #define __noreturn			__attribute__((noreturn))
 
 /*