提交 fb28ad35 编写于 作者: K Kay Sievers 提交者: David S. Miller

net: struct device - replace bus_id with dev_name(), dev_set_name()

Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 23779897
......@@ -1025,7 +1025,7 @@ static int __devinit vortex_probe1(struct device *gendev,
}
if ((edev = DEVICE_EISA(gendev))) {
print_name = edev->dev.bus_id;
print_name = dev_name(&edev->dev);
}
}
......@@ -2883,7 +2883,7 @@ static void vortex_get_drvinfo(struct net_device *dev,
strcpy(info->bus_info, pci_name(VORTEX_PCI(vp)));
} else {
if (VORTEX_EISA(vp))
sprintf(info->bus_info, vp->gendev->bus_id);
sprintf(info->bus_info, dev_name(vp->gendev));
else
sprintf(info->bus_info, "EISA 0x%lx %d",
dev->base_addr, dev->irq);
......
......@@ -511,7 +511,7 @@ static int __devinit dfx_register(struct device *bdev)
int dfx_bus_pci = DFX_BUS_PCI(bdev);
int dfx_bus_tc = DFX_BUS_TC(bdev);
int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
char *print_name = bdev->bus_id;
const char *print_name = dev_name(bdev);
struct net_device *dev;
DFX_board_t *bp; /* board pointer */
resource_size_t bar_start = 0; /* pointer to port */
......
......@@ -1448,7 +1448,7 @@ enc28j60_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
strlcpy(info->bus_info,
dev->dev.parent->bus_id, sizeof(info->bus_info));
dev_name(dev->dev.parent), sizeof(info->bus_info));
}
static int
......
......@@ -216,7 +216,7 @@ static int mpc52xx_fec_init_phy(struct net_device *dev)
struct phy_device *phydev;
char phy_id[BUS_ID_SIZE];
snprintf(phy_id, BUS_ID_SIZE, "%x:%02x",
snprintf(phy_id, sizeof(phy_id), "%x:%02x",
(unsigned int)dev->base_addr, priv->phy_addr);
priv->link = PHY_DOWN;
......
......@@ -546,7 +546,7 @@ static int init_phy(struct net_device *dev)
priv->oldspeed = 0;
priv->oldduplex = -1;
snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id);
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id);
interface = gfar_get_interface(dev);
......
......@@ -58,17 +58,17 @@
#define mlx4_dbg(mlevel, priv, format, arg...) \
if (NETIF_MSG_##mlevel & priv->msg_enable) \
printk(KERN_DEBUG "%s %s: " format , DRV_NAME ,\
(&priv->mdev->pdev->dev)->bus_id , ## arg)
(dev_name(&priv->mdev->pdev->dev)) , ## arg)
#define mlx4_err(mdev, format, arg...) \
printk(KERN_ERR "%s %s: " format , DRV_NAME ,\
(&mdev->pdev->dev)->bus_id , ## arg)
(dev_name(&mdev->pdev->dev)) , ## arg)
#define mlx4_info(mdev, format, arg...) \
printk(KERN_INFO "%s %s: " format , DRV_NAME ,\
(&mdev->pdev->dev)->bus_id , ## arg)
(dev_name(&mdev->pdev->dev)) , ## arg)
#define mlx4_warn(mdev, format, arg...) \
printk(KERN_WARNING "%s %s: " format , DRV_NAME ,\
(&mdev->pdev->dev)->bus_id , ## arg)
(dev_name(&mdev->pdev->dev)) , ## arg)
/*
* Device constants
......
......@@ -1105,7 +1105,8 @@ static int pasemi_mac_phy_init(struct net_device *dev)
goto err;
phy_id = *prop;
snprintf(mac->phy_id, BUS_ID_SIZE, "%x:%02x", (int)r.start, phy_id);
snprintf(mac->phy_id, sizeof(mac->phy_id), "%x:%02x",
(int)r.start, phy_id);
of_node_put(phy_dn);
......
......@@ -97,7 +97,7 @@ int mdiobus_register(struct mii_bus *bus)
bus->dev.parent = bus->parent;
bus->dev.class = &mdio_bus_class;
bus->dev.groups = NULL;
memcpy(bus->dev.bus_id, bus->id, MII_BUS_ID_SIZE);
dev_set_name(&bus->dev, bus->id);
err = device_register(&bus->dev);
if (err) {
......@@ -191,7 +191,7 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
phydev->dev.parent = bus->parent;
phydev->dev.bus = &mdio_bus_type;
snprintf(phydev->dev.bus_id, BUS_ID_SIZE, PHY_ID_FMT, bus->id, addr);
dev_set_name(&phydev->dev, PHY_ID_FMT, bus->id, addr);
phydev->bus = bus;
......
......@@ -45,7 +45,7 @@
*/
void phy_print_status(struct phy_device *phydev)
{
pr_info("PHY: %s - Link is %s", phydev->dev.bus_id,
pr_info("PHY: %s - Link is %s", dev_name(&phydev->dev),
phydev->link ? "Up" : "Down");
if (phydev->link)
printk(" - %d/%s", phydev->speed,
......
......@@ -74,7 +74,7 @@ int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
if (!fixup)
return -ENOMEM;
strncpy(fixup->bus_id, bus_id, BUS_ID_SIZE);
strlcpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id));
fixup->phy_uid = phy_uid;
fixup->phy_uid_mask = phy_uid_mask;
fixup->run = run;
......@@ -109,7 +109,7 @@ EXPORT_SYMBOL(phy_register_fixup_for_id);
*/
static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
{
if (strcmp(fixup->bus_id, phydev->dev.bus_id) != 0)
if (strcmp(fixup->bus_id, dev_name(&phydev->dev)) != 0)
if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
return 0;
......
......@@ -799,7 +799,7 @@ static int sh_eth_phy_init(struct net_device *ndev)
char phy_id[BUS_ID_SIZE];
struct phy_device *phydev = NULL;
snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT,
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
mdp->mii_bus->id , mdp->phy_id);
mdp->link = PHY_DOWN;
......
......@@ -1396,7 +1396,7 @@ static int tg3_phy_init(struct tg3 *tp)
phydev = tp->mdio_bus->phy_map[PHY_ADDR];
/* Attach the MAC to the PHY. */
phydev = phy_connect(tp->dev, phydev->dev.bus_id, tg3_adjust_link,
phydev = phy_connect(tp->dev, dev_name(&phydev->dev), tg3_adjust_link,
phydev->dev_flags, phydev->interface);
if (IS_ERR(phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n", tp->dev->name);
......@@ -13645,7 +13645,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
"%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
tp->dev->name,
tp->mdio_bus->phy_map[PHY_ADDR]->drv->name,
tp->mdio_bus->phy_map[PHY_ADDR]->dev.bus_id);
dev_name(&tp->mdio_bus->phy_map[PHY_ADDR]->dev));
else
printk(KERN_INFO
"%s: attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
......
......@@ -1118,7 +1118,7 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
}
dev->base_addr = iobase;
printk ("%s: %s at 0x%04lx", gendev->bus_id, name, iobase);
printk ("%s: %s at 0x%04lx", dev_name(gendev), name, iobase);
status = get_hw_addr(dev);
printk(", h/w address %pM\n", dev->dev_addr);
......@@ -1153,7 +1153,7 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
}
}
lp->fdx = lp->params.fdx;
sprintf(lp->adapter_name,"%s (%s)", name, gendev->bus_id);
sprintf(lp->adapter_name,"%s (%s)", name, dev_name(gendev));
lp->dma_size = (NUM_RX_DESC + NUM_TX_DESC) * sizeof(struct de4x5_desc);
#if defined(__alpha__) || defined(__powerpc__) || defined(CONFIG_SPARC) || defined(DE4X5_DO_MEMCPY)
......
......@@ -1615,8 +1615,8 @@ static int init_phy(struct net_device *dev)
priv->oldspeed = 0;
priv->oldduplex = -1;
snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->ug_info->mdio_bus,
priv->ug_info->phy_address);
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus,
priv->ug_info->phy_address);
phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
......
......@@ -79,7 +79,7 @@ do { if ((lbs_debug & (grp)) == (grp)) \
#define lbs_deb_tx(fmt, args...) LBS_DEB_LL(LBS_DEB_TX, " tx", fmt, ##args)
#define lbs_deb_fw(fmt, args...) LBS_DEB_LL(LBS_DEB_FW, " fw", fmt, ##args)
#define lbs_deb_usb(fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usb", fmt, ##args)
#define lbs_deb_usbd(dev, fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usbd", "%s:" fmt, (dev)->bus_id, ##args)
#define lbs_deb_usbd(dev, fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usbd", "%s:" fmt, dev_name(dev), ##args)
#define lbs_deb_cs(fmt, args...) LBS_DEB_LL(LBS_DEB_CS, " cs", fmt, ##args)
#define lbs_deb_thread(fmt, args...) LBS_DEB_LL(LBS_DEB_THREAD, " thread", fmt, ##args)
#define lbs_deb_sdio(fmt, args...) LBS_DEB_LL(LBS_DEB_SDIO, " sdio", fmt, ##args)
......
......@@ -5987,7 +5987,7 @@ static void orinoco_get_drvinfo(struct net_device *dev,
strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1);
strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1);
if (dev->dev.parent)
strncpy(info->bus_info, dev->dev.parent->bus_id,
strncpy(info->bus_info, dev_name(dev->dev.parent),
sizeof(info->bus_info) - 1);
else
snprintf(info->bus_info, sizeof(info->bus_info) - 1,
......
......@@ -308,7 +308,7 @@ orinoco_cs_config(struct pcmcia_device *link)
/* Finally, report what we've done */
printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
"0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
"0x%04x-0x%04x\n", dev->name, dev_name(dev->dev.parent),
link->irq.AssignedIRQ, link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
return 0;
......
......@@ -383,7 +383,7 @@ spectrum_cs_config(struct pcmcia_device *link)
/* Finally, report what we've done */
printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
"0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
"0x%04x-0x%04x\n", dev->name, dev_name(dev->dev.parent),
link->irq.AssignedIRQ, link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
......
......@@ -263,9 +263,9 @@ static inline struct device *wiphy_dev(struct wiphy *wiphy)
/**
* wiphy_name - get wiphy name
*/
static inline char *wiphy_name(struct wiphy *wiphy)
static inline const char *wiphy_name(struct wiphy *wiphy)
{
return wiphy->dev.bus_id;
return dev_name(&wiphy->dev);
}
/**
......
......@@ -149,7 +149,7 @@ int atm_register_sysfs(struct atm_dev *adev)
cdev->class = &atm_class;
dev_set_drvdata(cdev, adev);
snprintf(cdev->bus_id, BUS_ID_SIZE, "%s%d", adev->type, adev->number);
dev_set_name(cdev, "%s%d", adev->type, adev->number);
err = device_register(cdev);
if (err < 0)
return err;
......
......@@ -113,8 +113,7 @@ void hci_conn_add_sysfs(struct hci_conn *conn)
conn->dev.class = bt_class;
conn->dev.parent = &hdev->dev;
snprintf(conn->dev.bus_id, BUS_ID_SIZE, "%s:%d",
hdev->name, conn->handle);
dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
dev_set_drvdata(&conn->dev, conn);
......@@ -132,7 +131,7 @@ void hci_conn_add_sysfs(struct hci_conn *conn)
*/
static int __match_tty(struct device *dev, void *data)
{
return !strncmp(dev->bus_id, "rfcomm", 6);
return !strncmp(dev_name(dev), "rfcomm", 6);
}
static void del_conn(struct work_struct *work)
......@@ -421,7 +420,7 @@ int hci_register_sysfs(struct hci_dev *hdev)
dev->class = bt_class;
dev->parent = hdev->parent;
strlcpy(dev->bus_id, hdev->name, BUS_ID_SIZE);
dev_set_name(dev, hdev->name);
dev_set_drvdata(dev, hdev);
......
......@@ -494,7 +494,7 @@ int netdev_register_kobject(struct net_device *net)
dev->groups = groups;
BUILD_BUG_ON(BUS_ID_SIZE < IFNAMSIZ);
strlcpy(dev->bus_id, net->name, BUS_ID_SIZE);
dev_set_name(dev, net->name);
#ifdef CONFIG_SYSFS
*groups++ = &netstat_group;
......
......@@ -284,7 +284,7 @@ dsa_slave_create(struct dsa_switch *ds, struct device *parent,
netif_carrier_off(slave_dev);
if (p->phy != NULL) {
phy_attach(slave_dev, p->phy->dev.bus_id,
phy_attach(slave_dev, dev_name(&p->phy->dev),
0, PHY_INTERFACE_MODE_GMII);
p->phy->autoneg = AUTONEG_ENABLE;
......
......@@ -774,7 +774,7 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill)
int error;
if (!rfkill->led_trigger.name)
rfkill->led_trigger.name = rfkill->dev.bus_id;
rfkill->led_trigger.name = dev_name(&rfkill->dev);
if (!rfkill->led_trigger.activate)
rfkill->led_trigger.activate = rfkill_led_trigger_activate;
error = led_trigger_register(&rfkill->led_trigger);
......@@ -815,8 +815,7 @@ int __must_check rfkill_register(struct rfkill *rfkill)
"badly initialized rfkill struct\n"))
return -EINVAL;
snprintf(dev->bus_id, sizeof(dev->bus_id),
"rfkill%ld", (long)atomic_inc_return(&rfkill_no) - 1);
dev_set_name(dev, "rfkill%ld", (long)atomic_inc_return(&rfkill_no) - 1);
rfkill_led_trigger_register(rfkill);
......
......@@ -236,8 +236,7 @@ struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv)
mutex_unlock(&cfg80211_drv_mutex);
/* give it a proper name */
snprintf(drv->wiphy.dev.bus_id, BUS_ID_SIZE,
PHY_NAME "%d", drv->idx);
dev_set_name(&drv->wiphy.dev, PHY_NAME "%d", drv->idx);
mutex_init(&drv->mtx);
mutex_init(&drv->devlist_mtx);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册