ASoC: wm_hubs: Push check for idle_bias_off out into drivers

For later wm_hubs devices we have much less need to keep the biases up
even when using single ended line outputs so flag idle_bias_off for
everything except the WM8993 and WM8994.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

sound/soc/codecs/wm8993.c

@@ -1622,6 +1622,12 @@ static int wm8993_probe(struct snd_soc_codec *codec)
 	wm_hubs_add_analogue_routes(codec, wm8993->pdata.lineout1_diff,
 				    wm8993->pdata.lineout2_diff);
 
+	/* If the line outputs are differential then we aren't presenting
+	 * VMID as an output and can disable it.
+	 */
+	if (wm8993->pdata.lineout1_diff && wm8993->pdata.lineout2_diff)
+		codec->dapm.idle_bias_off = 1;
+
 	return 0;
 
 }

sound/soc/codecs/wm8994.c

@@ -3396,10 +3396,18 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 	pm_runtime_enable(codec->dev);
 	pm_runtime_resume(codec->dev);
 
+	/* By default use idle_bias_off, will override for WM8994 */
+	codec->dapm.idle_bias_off = 1;
+
 	/* Set revision-specific configuration */
 	wm8994->revision = snd_soc_read(codec, WM8994_CHIP_REVISION);
 	switch (control->type) {
 	case WM8994:
+		/* Single ended line outputs should have VMID on. */
+		if (!wm8994->pdata->lineout1_diff ||
+		    !wm8994->pdata->lineout2_diff)
+			codec->dapm.idle_bias_off = 0;
+
 		switch (wm8994->revision) {
 		case 2:
 		case 3:

sound/soc/codecs/wm_hubs.c

@@ -952,12 +952,6 @@ int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *codec,
 				    WM8993_LINEOUT2_MODE,
 				    WM8993_LINEOUT2_MODE);
 
-	/* If the line outputs are differential then we aren't presenting
-	 * VMID as an output and can disable it.
-	 */
-	if (lineout1_diff && lineout2_diff)
-		codec->dapm.idle_bias_off = 1;
-
 	if (lineout1fb)
 		snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
 				    WM8993_LINEOUT1_FB, WM8993_LINEOUT1_FB);