gpio: f7188x: use the new open drain callback

The F7188x chips supports setting the pins in open drain mode.
Activate the new .set_single_ended() callback.

Cc: Peter Hung <hpeter@gmail.com>
Cc: Andreas Bofjall <andreas@gazonk.org>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

drivers/gpio/gpio-f7188x.c

@@ -130,6 +130,9 @@ static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset);
 static int f7188x_gpio_direction_out(struct gpio_chip *chip,
 				     unsigned offset, int value);
 static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value);
+static int f7188x_gpio_set_single_ended(struct gpio_chip *gc,
+					unsigned offset,
+					enum single_ended_mode mode);
 
 #define F7188X_GPIO_BANK(_base, _ngpio, _regbase)			\
 	{								\
@@ -140,6 +143,7 @@ static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value);
 			.get              = f7188x_gpio_get,		\
 			.direction_output = f7188x_gpio_direction_out,	\
 			.set              = f7188x_gpio_set,		\
+			.set_single_ended = f7188x_gpio_set_single_ended, \
 			.base             = _base,			\
 			.ngpio            = _ngpio,			\
 			.can_sleep        = true,			\
@@ -301,6 +305,35 @@ static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	superio_exit(sio->addr);
 }
 
+static int f7188x_gpio_set_single_ended(struct gpio_chip *chip,
+					unsigned offset,
+					enum single_ended_mode mode)
+{
+	int err;
+	struct f7188x_gpio_bank *bank = gpiochip_get_data(chip);
+	struct f7188x_sio *sio = bank->data->sio;
+	u8 data;
+
+	if (mode != LINE_MODE_OPEN_DRAIN &&
+	    mode != LINE_MODE_PUSH_PULL)
+		return -ENOTSUPP;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return err;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	data = superio_inb(sio->addr, gpio_out_mode(bank->regbase));
+	if (mode == LINE_MODE_OPEN_DRAIN)
+		data &= ~BIT(offset);
+	else
+		data |= BIT(offset);
+	superio_outb(sio->addr, gpio_data_mode(bank->regbase), data);
+
+	superio_exit(sio->addr);
+	return 0;
+}
+
 /*
  * Platform device and driver.
  */