IXP4xx: move Coyote platform macros to the platform code.

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

arch/arm/mach-ixp4xx/coyote-pci.c

@@ -18,13 +18,21 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-
 #include <asm/mach/pci.h>
 
+#define COYOTE_PCI_SLOT0_DEVID	14
+#define COYOTE_PCI_SLOT1_DEVID	15
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define COYOTE_PCI_SLOT0_PIN	6
+#define COYOTE_PCI_SLOT1_PIN	11
+
+#define IRQ_COYOTE_PCI_SLOT0	IRQ_IXP4XX_GPIO6
+#define IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
+
 void __init coyote_pci_preinit(void)
 {
 	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW);

arch/arm/mach-ixp4xx/coyote-setup.c

@@ -25,6 +25,15 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#define COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
+#define COYOTE_IDE_BASE_VIRT	0xFFFE1000
+#define COYOTE_IDE_REGION_SIZE	0x1000
+
+#define COYOTE_IDE_DATA_PORT	0xFFFE10E0
+#define COYOTE_IDE_CTRL_PORT	0xFFFE10FC
+#define COYOTE_IDE_ERROR_PORT	0xFFFE10E2
+#define IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
+
 static struct flash_platform_data coyote_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,

arch/arm/mach-ixp4xx/include/mach/coyote.h

-/*
- * arch/arm/mach-ixp4xx/include/mach/coyote.h
- *
- * ADI Engineering platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define	COYOTE_PCI_SLOT0_PIN	6
-#define	COYOTE_PCI_SLOT1_PIN	11
-
-#define	COYOTE_PCI_SLOT0_DEVID	14
-#define	COYOTE_PCI_SLOT1_DEVID	15
-
-#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
-#define	COYOTE_IDE_BASE_VIRT	0xFFFE1000
-#define	COYOTE_IDE_REGION_SIZE	0x1000
-
-#define	COYOTE_IDE_DATA_PORT	0xFFFE10E0
-#define	COYOTE_IDE_CTRL_PORT	0xFFFE10FC
-#define	COYOTE_IDE_ERROR_PORT	0xFFFE10E2
-

arch/arm/mach-ixp4xx/include/mach/hardware.h

@@ -44,7 +44,6 @@
 #include "platform.h"
 
 /* Platform specific details */
-#include "coyote.h"
 #include "prpmc1100.h"
 #include "nslu2.h"
 #include "nas100d.h"

arch/arm/mach-ixp4xx/include/mach/irqs.h

@@ -78,13 +78,6 @@
 #define	IRQ_PRPMC1100_PCI_INTC	IRQ_IXP4XX_GPIO9
 #define	IRQ_PRPMC1100_PCI_INTD	IRQ_IXP4XX_GPIO8
 
-/*
- * ADI Coyote Board IRQs
- */
-#define	IRQ_COYOTE_PCI_SLOT0	IRQ_IXP4XX_GPIO6
-#define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
-#define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
-
 /*
  * NSLU2 board IRQs
  */