x86, cleanup: Remove obsolete boot_cpu_id variable

boot_cpu_id is there for historical reasons and was renamed to
boot_cpu_physical_apicid in patch:

 c70dcb74 x86: change boot_cpu_id to boot_cpu_physical_apicid

However, there are some remaining occurrences of boot_cpu_id that are
never touched in the kernel and thus its value is always 0.

This patch removes boot_cpu_id completely.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
LKML-Reference: <1279731838-1522-8-git-send-email-robert.richter@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

arch/x86/include/asm/apb_timer.h

@@ -54,7 +54,6 @@ extern struct clock_event_device *global_clock_event;
 extern unsigned long apbt_quick_calibrate(void);
 extern int arch_setup_apbt_irqs(int irq, int trigger, int mask, int cpu);
 extern void apbt_setup_secondary_clock(void);
-extern unsigned int boot_cpu_id;
 
 extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint);
 extern void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr);

arch/x86/include/asm/cpu.h

@@ -32,6 +32,5 @@ extern void arch_unregister_cpu(int);
 
 DECLARE_PER_CPU(int, cpu_state);
 
-extern unsigned int boot_cpu_id;
 
 #endif /* _ASM_X86_CPU_H */

arch/x86/kernel/apb_timer.c

@@ -343,7 +343,7 @@ void apbt_setup_secondary_clock(void)
 
 	/* Don't register boot CPU clockevent */
 	cpu = smp_processor_id();
-	if (cpu == boot_cpu_id)
+	if (!cpu)
 		return;
 	/*
 	 * We need to calculate the scaled math multiplication factor for

arch/x86/kernel/apic/io_apic.c

@@ -162,7 +162,7 @@ int __init arch_early_irq_init(void)
 
 	cfg = irq_cfgx;
 	count = ARRAY_SIZE(irq_cfgx);
-	node= cpu_to_node(boot_cpu_id);
+	node = cpu_to_node(0);
 
 	for (i = 0; i < count; i++) {
 		desc = irq_to_desc(i);
@@ -1483,7 +1483,7 @@ static void __init setup_IO_APIC_irqs(void)
 	int notcon = 0;
 	struct irq_desc *desc;
 	struct irq_cfg *cfg;
-	int node = cpu_to_node(boot_cpu_id);
+	int node = cpu_to_node(0);
 
 	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
 
@@ -1548,7 +1548,7 @@ static void __init setup_IO_APIC_irqs(void)
 void setup_IO_APIC_irq_extra(u32 gsi)
 {
 	int apic_id = 0, pin, idx, irq;
-	int node = cpu_to_node(boot_cpu_id);
+	int node = cpu_to_node(0);
 	struct irq_desc *desc;
 	struct irq_cfg *cfg;
 
@@ -2925,7 +2925,7 @@ static inline void __init check_timer(void)
 {
 	struct irq_desc *desc = irq_to_desc(0);
 	struct irq_cfg *cfg = desc->chip_data;
-	int node = cpu_to_node(boot_cpu_id);
+	int node = cpu_to_node(0);
 	int apic1, pin1, apic2, pin2;
 	unsigned long flags;
 	int no_pin1 = 0;
@@ -3279,7 +3279,7 @@ unsigned int create_irq_nr(unsigned int irq_want, int node)
 
 int create_irq(void)
 {
-	int node = cpu_to_node(boot_cpu_id);
+	int node = cpu_to_node(0);
 	unsigned int irq_want;
 	int irq;
 
@@ -3901,7 +3901,7 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq,
 	if (dev)
 		node = dev_to_node(dev);
 	else
-		node = cpu_to_node(boot_cpu_id);
+		node = cpu_to_node(0);
 
 	desc = irq_to_desc_alloc_node(irq, node);
 	if (!desc) {

arch/x86/kernel/cpu/amd.c

@@ -148,7 +148,7 @@ static void __cpuinit amd_k7_smp_check(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_SMP
 	/* calling is from identify_secondary_cpu() ? */
-	if (c->cpu_index == boot_cpu_id)
+	if (!c->cpu_index)
 		return;
 
 	/*

arch/x86/kernel/cpu/common.c

@@ -665,7 +665,7 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 		this_cpu->c_early_init(c);
 
 #ifdef CONFIG_SMP
-	c->cpu_index = boot_cpu_id;
+	c->cpu_index = 0;
 #endif
 	filter_cpuid_features(c, false);
 }

arch/x86/kernel/cpu/intel.c

@@ -169,7 +169,7 @@ static void __cpuinit intel_smp_check(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_SMP
 	/* calling is from identify_secondary_cpu() ? */
-	if (c->cpu_index == boot_cpu_id)
+	if (!c->cpu_index)
 		return;
 
 	/*

arch/x86/kernel/reboot.c

@@ -84,7 +84,7 @@ static int __init reboot_setup(char *str)
 			}
 				/* we will leave sorting out the final value
 				   when we are ready to reboot, since we might not
-				   have set up boot_cpu_id or smp_num_cpu */
+				   have detected BSP APIC ID or smp_num_cpu */
 			break;
 #endif /* CONFIG_SMP */
 

arch/x86/kernel/setup.c

@@ -125,7 +125,6 @@ unsigned long max_pfn_mapped;
 RESERVE_BRK(dmi_alloc, 65536);
 #endif
 
-unsigned int boot_cpu_id __read_mostly;
 
 static __initdata unsigned long _brk_start = (unsigned long)__brk_base;
 unsigned long _brk_end = (unsigned long)__brk_base;

arch/x86/kernel/setup_percpu.c

@@ -253,7 +253,7 @@ void __init setup_per_cpu_areas(void)
 		 * Up to this point, the boot CPU has been using .init.data
 		 * area.  Reload any changed state for the boot CPU.
 		 */
-		if (cpu == boot_cpu_id)
+		if (!cpu)
 			switch_to_new_gdt(cpu);
 	}
 

arch/x86/mm/k8topology_64.c

@@ -54,8 +54,8 @@ static __init int find_northbridge(void)
 static __init void early_get_boot_cpu_id(void)
 {
 	/*
-	 * need to get boot_cpu_id so can use that to create apicid_to_node
-	 * in k8_scan_nodes()
+	 * need to get the APIC ID of the BSP so can use that to
+	 * create apicid_to_node in k8_scan_nodes()
 	 */
 #ifdef CONFIG_X86_MPPARSE
 	/*
@@ -212,7 +212,7 @@ int __init k8_scan_nodes(void)
 	bits = boot_cpu_data.x86_coreid_bits;
 	cores = (1<<bits);
 	apicid_base = 0;
-	/* need to get boot_cpu_id early for system with apicid lifting */
+	/* get the APIC ID of the BSP early for systems with apicid lifting */
 	early_get_boot_cpu_id();
 	if (boot_cpu_physical_apicid > 0) {
 		pr_info("BSP APIC ID: %02x\n", boot_cpu_physical_apicid);