提交 f6b0fa02 编写于 作者: R Russell King

ARM: pm: add generic CPU suspend/resume support

This adds core support for saving and restoring CPU coprocessor
registers for suspend/resume support.  This contains support for suspend
with ARM920, ARM926, SA11x0, PXA25x, PXA27x, PXA3xx, V6 and V7 CPUs.
Tested on Assabet and Tegra 2.
Tested-by: NColin Cross <ccross@android.com>
Tested-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 753790e7
......@@ -256,6 +256,9 @@
#define cpu_dcache_clean_area __glue(CPU_NAME,_dcache_clean_area)
#define cpu_do_switch_mm __glue(CPU_NAME,_switch_mm)
#define cpu_set_pte_ext __glue(CPU_NAME,_set_pte_ext)
#define cpu_suspend_size __glue(CPU_NAME,_suspend_size)
#define cpu_do_suspend __glue(CPU_NAME,_do_suspend)
#define cpu_do_resume __glue(CPU_NAME,_do_resume)
#endif
#endif
......@@ -66,6 +66,11 @@ extern struct processor {
* ignore 'ext'.
*/
void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
/* Suspend/resume */
unsigned int suspend_size;
void (*do_suspend)(void *);
void (*do_resume)(void *);
} processor;
#ifndef MULTI_CPU
......@@ -86,6 +91,8 @@ extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm)
#endif
extern void cpu_resume(void);
#include <asm/memory.h>
#ifdef CONFIG_MMU
......
......@@ -29,6 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_SMP) += smp.o smp_tlb.o
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
......
......@@ -13,6 +13,7 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
#include <asm/cacheflush.h>
#include <asm/glue-df.h>
#include <asm/glue-pf.h>
#include <asm/mach/arch.h>
......@@ -115,6 +116,14 @@ int main(void)
#endif
#ifdef MULTI_PABORT
DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort));
#endif
#ifdef MULTI_CPU
DEFINE(CPU_SLEEP_SIZE, offsetof(struct processor, suspend_size));
DEFINE(CPU_DO_SUSPEND, offsetof(struct processor, do_suspend));
DEFINE(CPU_DO_RESUME, offsetof(struct processor, do_resume));
#endif
#ifdef MULTI_CACHE
DEFINE(CACHE_FLUSH_KERN_ALL, offsetof(struct cpu_cache_fns, flush_kern_all));
#endif
BLANK();
DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
......
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/assembler.h>
#include <asm/glue-cache.h>
#include <asm/glue-proc.h>
#include <asm/system.h>
.text
/*
* Save CPU state for a suspend
* r1 = v:p offset
* r3 = virtual return function
* Note: sp is decremented to allocate space for CPU state on stack
* r0-r3,r9,r10,lr corrupted
*/
ENTRY(cpu_suspend)
mov r9, lr
#ifdef MULTI_CPU
ldr r10, =processor
mov r2, sp @ current virtual SP
ldr r0, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function
sub sp, sp, r0 @ allocate CPU state on stack
mov r0, sp @ save pointer
add ip, ip, r1 @ convert resume fn to phys
stmfd sp!, {r1, r2, r3, ip} @ save v:p, virt SP, retfn, phys resume fn
ldr r3, =sleep_save_sp
add r2, sp, r1 @ convert SP to phys
str r2, [r3] @ save phys SP
mov lr, pc
ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state
#else
mov r2, sp @ current virtual SP
ldr r0, =cpu_suspend_size
sub sp, sp, r0 @ allocate CPU state on stack
mov r0, sp @ save pointer
stmfd sp!, {r1, r2, r3} @ save v:p, virt SP, return fn
ldr r3, =sleep_save_sp
add r2, sp, r1 @ convert SP to phys
str r2, [r3] @ save phys SP
bl cpu_do_suspend
#endif
@ flush data cache
#ifdef MULTI_CACHE
ldr r10, =cpu_cache
mov lr, r9
ldr pc, [r10, #CACHE_FLUSH_KERN_ALL]
#else
mov lr, r9
b __cpuc_flush_kern_all
#endif
ENDPROC(cpu_suspend)
.ltorg
/*
* r0 = control register value
* r1 = v:p offset (preserved by cpu_do_resume)
* r2 = phys page table base
* r3 = L1 section flags
*/
ENTRY(cpu_resume_mmu)
adr r4, cpu_resume_turn_mmu_on
mov r4, r4, lsr #20
orr r3, r3, r4, lsl #20
ldr r5, [r2, r4, lsl #2] @ save old mapping
str r3, [r2, r4, lsl #2] @ setup 1:1 mapping for mmu code
sub r2, r2, r1
ldr r3, =cpu_resume_after_mmu
bic r1, r0, #CR_C @ ensure D-cache is disabled
b cpu_resume_turn_mmu_on
ENDPROC(cpu_resume_mmu)
.ltorg
.align 5
cpu_resume_turn_mmu_on:
mcr p15, 0, r1, c1, c0, 0 @ turn on MMU, I-cache, etc
mrc p15, 0, r1, c0, c0, 0 @ read id reg
mov r1, r1
mov r1, r1
mov pc, r3 @ jump to virtual address
ENDPROC(cpu_resume_turn_mmu_on)
cpu_resume_after_mmu:
str r5, [r2, r4, lsl #2] @ restore old mapping
mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache
mov pc, lr
ENDPROC(cpu_resume_after_mmu)
/*
* Note: Yes, part of the following code is located into the .data section.
* This is to allow sleep_save_sp to be accessed with a relative load
* while we can't rely on any MMU translation. We could have put
* sleep_save_sp in the .text section as well, but some setups might
* insist on it to be truly read-only.
*/
.data
.align
ENTRY(cpu_resume)
ldr r0, sleep_save_sp @ stack phys addr
msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
#ifdef MULTI_CPU
ldmia r0!, {r1, sp, lr, pc} @ load v:p, stack, return fn, resume fn
#else
ldmia r0!, {r1, sp, lr} @ load v:p, stack, return fn
b cpu_do_resume
#endif
ENDPROC(cpu_resume)
sleep_save_sp:
.word 0 @ preserve stack phys ptr here
......@@ -493,6 +493,9 @@ arm1020_processor_functions:
.word cpu_arm1020_dcache_clean_area
.word cpu_arm1020_switch_mm
.word cpu_arm1020_set_pte_ext
.word 0
.word 0
.word 0
.size arm1020_processor_functions, . - arm1020_processor_functions
.section ".rodata"
......
......@@ -474,6 +474,9 @@ arm1020e_processor_functions:
.word cpu_arm1020e_dcache_clean_area
.word cpu_arm1020e_switch_mm
.word cpu_arm1020e_set_pte_ext
.word 0
.word 0
.word 0
.size arm1020e_processor_functions, . - arm1020e_processor_functions
.section ".rodata"
......
......@@ -457,6 +457,9 @@ arm1022_processor_functions:
.word cpu_arm1022_dcache_clean_area
.word cpu_arm1022_switch_mm
.word cpu_arm1022_set_pte_ext
.word 0
.word 0
.word 0
.size arm1022_processor_functions, . - arm1022_processor_functions
.section ".rodata"
......
......@@ -452,6 +452,9 @@ arm1026_processor_functions:
.word cpu_arm1026_dcache_clean_area
.word cpu_arm1026_switch_mm
.word cpu_arm1026_set_pte_ext
.word 0
.word 0
.word 0
.size arm1026_processor_functions, . - arm1026_processor_functions
.section .rodata
......
......@@ -284,6 +284,9 @@ ENTRY(arm6_processor_functions)
.word cpu_arm6_dcache_clean_area
.word cpu_arm6_switch_mm
.word cpu_arm6_set_pte_ext
.word 0
.word 0
.word 0
.size arm6_processor_functions, . - arm6_processor_functions
/*
......@@ -301,6 +304,9 @@ ENTRY(arm7_processor_functions)
.word cpu_arm7_dcache_clean_area
.word cpu_arm7_switch_mm
.word cpu_arm7_set_pte_ext
.word 0
.word 0
.word 0
.size arm7_processor_functions, . - arm7_processor_functions
.section ".rodata"
......
......@@ -185,6 +185,9 @@ ENTRY(arm720_processor_functions)
.word cpu_arm720_dcache_clean_area
.word cpu_arm720_switch_mm
.word cpu_arm720_set_pte_ext
.word 0
.word 0
.word 0
.size arm720_processor_functions, . - arm720_processor_functions
.section ".rodata"
......
......@@ -130,6 +130,9 @@ ENTRY(arm740_processor_functions)
.word cpu_arm740_dcache_clean_area
.word cpu_arm740_switch_mm
.word 0 @ cpu_*_set_pte
.word 0
.word 0
.word 0
.size arm740_processor_functions, . - arm740_processor_functions
.section ".rodata"
......
......@@ -70,6 +70,9 @@ ENTRY(arm7tdmi_processor_functions)
.word cpu_arm7tdmi_dcache_clean_area
.word cpu_arm7tdmi_switch_mm
.word 0 @ cpu_*_set_pte
.word 0
.word 0
.word 0
.size arm7tdmi_processor_functions, . - arm7tdmi_processor_functions
.section ".rodata"
......
......@@ -387,6 +387,40 @@ ENTRY(cpu_arm920_set_pte_ext)
#endif
mov pc, lr
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
.equ cpu_arm920_suspend_size, 4 * 3
#ifdef CONFIG_PM
ENTRY(cpu_arm920_do_suspend)
stmfd sp!, {r4 - r7, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
mrc p15, 0, r6, c2, c0, 0 @ TTB address
mrc p15, 0, r7, c1, c0, 0 @ Control register
stmia r0, {r4 - r7}
ldmfd sp!, {r4 - r7, pc}
ENDPROC(cpu_arm920_do_suspend)
ENTRY(cpu_arm920_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
ldmia r0, {r4 - r7}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
mcr p15, 0, r6, c2, c0, 0 @ TTB address
mov r0, r7 @ control register
mov r2, r6, lsr #14 @ get TTB0 base
mov r2, r2, lsl #14
ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
b cpu_resume_mmu
ENDPROC(cpu_arm920_do_resume)
#else
#define cpu_arm920_do_suspend 0
#define cpu_arm920_do_resume 0
#endif
__CPUINIT
.type __arm920_setup, #function
......@@ -432,6 +466,9 @@ arm920_processor_functions:
.word cpu_arm920_dcache_clean_area
.word cpu_arm920_switch_mm
.word cpu_arm920_set_pte_ext
.word cpu_arm920_suspend_size
.word cpu_arm920_do_suspend
.word cpu_arm920_do_resume
.size arm920_processor_functions, . - arm920_processor_functions
.section ".rodata"
......
......@@ -436,6 +436,9 @@ arm922_processor_functions:
.word cpu_arm922_dcache_clean_area
.word cpu_arm922_switch_mm
.word cpu_arm922_set_pte_ext
.word 0
.word 0
.word 0
.size arm922_processor_functions, . - arm922_processor_functions
.section ".rodata"
......
......@@ -503,6 +503,9 @@ arm925_processor_functions:
.word cpu_arm925_dcache_clean_area
.word cpu_arm925_switch_mm
.word cpu_arm925_set_pte_ext
.word 0
.word 0
.word 0
.size arm925_processor_functions, . - arm925_processor_functions
.section ".rodata"
......
......@@ -401,6 +401,40 @@ ENTRY(cpu_arm926_set_pte_ext)
#endif
mov pc, lr
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm926_suspend_size
.equ cpu_arm926_suspend_size, 4 * 3
#ifdef CONFIG_PM
ENTRY(cpu_arm926_do_suspend)
stmfd sp!, {r4 - r7, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
mrc p15, 0, r6, c2, c0, 0 @ TTB address
mrc p15, 0, r7, c1, c0, 0 @ Control register
stmia r0, {r4 - r7}
ldmfd sp!, {r4 - r7, pc}
ENDPROC(cpu_arm926_do_suspend)
ENTRY(cpu_arm926_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
ldmia r0, {r4 - r7}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
mcr p15, 0, r6, c2, c0, 0 @ TTB address
mov r0, r7 @ control register
mov r2, r6, lsr #14 @ get TTB0 base
mov r2, r2, lsl #14
ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
b cpu_resume_mmu
ENDPROC(cpu_arm926_do_resume)
#else
#define cpu_arm926_do_suspend 0
#define cpu_arm926_do_resume 0
#endif
__CPUINIT
.type __arm926_setup, #function
......@@ -456,6 +490,9 @@ arm926_processor_functions:
.word cpu_arm926_dcache_clean_area
.word cpu_arm926_switch_mm
.word cpu_arm926_set_pte_ext
.word cpu_arm926_suspend_size
.word cpu_arm926_do_suspend
.word cpu_arm926_do_resume
.size arm926_processor_functions, . - arm926_processor_functions
.section ".rodata"
......
......@@ -363,6 +363,9 @@ ENTRY(arm940_processor_functions)
.word cpu_arm940_dcache_clean_area
.word cpu_arm940_switch_mm
.word 0 @ cpu_*_set_pte
.word 0
.word 0
.word 0
.size arm940_processor_functions, . - arm940_processor_functions
.section ".rodata"
......
......@@ -419,6 +419,9 @@ ENTRY(arm946_processor_functions)
.word cpu_arm946_dcache_clean_area
.word cpu_arm946_switch_mm
.word 0 @ cpu_*_set_pte
.word 0
.word 0
.word 0
.size arm946_processor_functions, . - arm946_processor_functions
.section ".rodata"
......
......@@ -70,6 +70,9 @@ ENTRY(arm9tdmi_processor_functions)
.word cpu_arm9tdmi_dcache_clean_area
.word cpu_arm9tdmi_switch_mm
.word 0 @ cpu_*_set_pte
.word 0
.word 0
.word 0
.size arm9tdmi_processor_functions, . - arm9tdmi_processor_functions
.section ".rodata"
......
......@@ -195,6 +195,9 @@ fa526_processor_functions:
.word cpu_fa526_dcache_clean_area
.word cpu_fa526_switch_mm
.word cpu_fa526_set_pte_ext
.word 0
.word 0
.word 0
.size fa526_processor_functions, . - fa526_processor_functions
.section ".rodata"
......
......@@ -554,6 +554,9 @@ feroceon_processor_functions:
.word cpu_feroceon_dcache_clean_area
.word cpu_feroceon_switch_mm
.word cpu_feroceon_set_pte_ext
.word 0
.word 0
.word 0
.size feroceon_processor_functions, . - feroceon_processor_functions
.section ".rodata"
......
......@@ -388,6 +388,9 @@ mohawk_processor_functions:
.word cpu_mohawk_dcache_clean_area
.word cpu_mohawk_switch_mm
.word cpu_mohawk_set_pte_ext
.word 0
.word 0
.word 0
.size mohawk_processor_functions, . - mohawk_processor_functions
.section ".rodata"
......
......@@ -203,6 +203,9 @@ ENTRY(sa110_processor_functions)
.word cpu_sa110_dcache_clean_area
.word cpu_sa110_switch_mm
.word cpu_sa110_set_pte_ext
.word 0
.word 0
.word 0
.size sa110_processor_functions, . - sa110_processor_functions
.section ".rodata"
......
......@@ -169,6 +169,42 @@ ENTRY(cpu_sa1100_set_pte_ext)
#endif
mov pc, lr
.globl cpu_sa1100_suspend_size
.equ cpu_sa1100_suspend_size, 4*4
#ifdef CONFIG_PM
ENTRY(cpu_sa1100_do_suspend)
stmfd sp!, {r4 - r7, lr}
mrc p15, 0, r4, c3, c0, 0 @ domain ID
mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c1, c0, 0 @ control reg
stmia r0, {r4 - r7} @ store cp regs
ldmfd sp!, {r4 - r7, pc}
ENDPROC(cpu_sa1100_do_suspend)
ENTRY(cpu_sa1100_do_resume)
ldmia r0, {r4 - r7} @ load cp regs
mov r1, #0
mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs
mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache
mcr p15, 0, r1, c9, c0, 0 @ invalidate RB
mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
mcr p15, 0, r4, c3, c0, 0 @ domain ID
mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
mcr p15, 0, r6, c13, c0, 0 @ PID
mov r0, r7 @ control register
mov r2, r5, lsr #14 @ get TTB0 base
mov r2, r2, lsl #14
ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
b cpu_resume_mmu
ENDPROC(cpu_sa1100_do_resume)
#else
#define cpu_sa1100_do_suspend 0
#define cpu_sa1100_do_resume 0
#endif
__CPUINIT
.type __sa1100_setup, #function
......@@ -218,6 +254,9 @@ ENTRY(sa1100_processor_functions)
.word cpu_sa1100_dcache_clean_area
.word cpu_sa1100_switch_mm
.word cpu_sa1100_set_pte_ext
.word cpu_sa1100_suspend_size
.word cpu_sa1100_do_suspend
.word cpu_sa1100_do_resume
.size sa1100_processor_functions, . - sa1100_processor_functions
.section ".rodata"
......
......@@ -121,6 +121,53 @@ ENTRY(cpu_v6_set_pte_ext)
#endif
mov pc, lr
/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
.globl cpu_v6_suspend_size
.equ cpu_v6_suspend_size, 4 * 8
#ifdef CONFIG_PM
ENTRY(cpu_v6_do_suspend)
stmfd sp!, {r4 - r11, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
mrc p15, 0, r5, c13, c0, 1 @ Context ID
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0
mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1
mrc p15, 0, r9, c1, c0, 1 @ auxillary control register
mrc p15, 0, r10, c1, c0, 2 @ co-processor access control
mrc p15, 0, r11, c1, c0, 0 @ control register
stmia r0, {r4 - r11}
ldmfd sp!, {r4- r11, pc}
ENDPROC(cpu_v6_do_suspend)
ENTRY(cpu_v6_do_resume)
mov ip, #0
mcr p15, 0, ip, c7, c14, 0 @ clean+invalidate D cache
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache
mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
ldmia r0, {r4 - r11}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 1 @ Context ID
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0
mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1
mcr p15, 0, r9, c1, c0, 1 @ auxillary control register
mcr p15, 0, r10, c1, c0, 2 @ co-processor access control
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mcr p15, 0, ip, c7, c5, 4 @ ISB
mov r0, r11 @ control register
mov r2, r7, lsr #14 @ get TTB0 base
mov r2, r2, lsl #14
ldr r3, cpu_resume_l1_flags
b cpu_resume_mmu
ENDPROC(cpu_v6_do_resume)
cpu_resume_l1_flags:
ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
#else
#define cpu_v6_do_suspend 0
#define cpu_v6_do_resume 0
#endif
.type cpu_v6_name, #object
......@@ -206,6 +253,9 @@ ENTRY(v6_processor_functions)
.word cpu_v6_dcache_clean_area
.word cpu_v6_switch_mm
.word cpu_v6_set_pte_ext
.word cpu_v6_suspend_size
.word cpu_v6_do_suspend
.word cpu_v6_do_resume
.size v6_processor_functions, . - v6_processor_functions
.section ".rodata"
......
......@@ -171,6 +171,87 @@ cpu_v7_name:
.ascii "ARMv7 Processor"
.align
/*
* Memory region attributes with SCTLR.TRE=1
*
* n = TEX[0],C,B
* TR = PRRR[2n+1:2n] - memory type
* IR = NMRR[2n+1:2n] - inner cacheable property
* OR = NMRR[2n+17:2n+16] - outer cacheable property
*
* n TR IR OR
* UNCACHED 000 00
* BUFFERABLE 001 10 00 00
* WRITETHROUGH 010 10 10 10
* WRITEBACK 011 10 11 11
* reserved 110
* WRITEALLOC 111 10 01 01
* DEV_SHARED 100 01
* DEV_NONSHARED 100 01
* DEV_WC 001 10
* DEV_CACHED 011 10
*
* Other attributes:
*
* DS0 = PRRR[16] = 0 - device shareable property
* DS1 = PRRR[17] = 1 - device shareable property
* NS0 = PRRR[18] = 0 - normal shareable property
* NS1 = PRRR[19] = 1 - normal shareable property
* NOS = PRRR[24+n] = 1 - not outer shareable
*/
.equ PRRR, 0xff0a81a8
.equ NMRR, 0x40e040e0
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
.equ cpu_v7_suspend_size, 4 * 8
#ifdef CONFIG_PM
ENTRY(cpu_v7_do_suspend)
stmfd sp!, {r4 - r11, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
mrc p15, 0, r5, c13, c0, 1 @ Context ID
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 0 @ TTB 0
mrc p15, 0, r8, c2, c0, 1 @ TTB 1
mrc p15, 0, r9, c1, c0, 0 @ Control register
mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
stmia r0, {r4 - r11}
ldmfd sp!, {r4 - r11, pc}
ENDPROC(cpu_v7_do_suspend)
ENTRY(cpu_v7_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
ldmia r0, {r4 - r11}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 1 @ Context ID
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
mcr p15, 0, r7, c2, c0, 0 @ TTB 0
mcr p15, 0, r8, c2, c0, 1 @ TTB 1
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mcr p15, 0, r10, c1, c0, 1 @ Auxillary control register
mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
mcr p15, 0, r4, c10, c2, 0 @ write PRRR
mcr p15, 0, r5, c10, c2, 1 @ write NMRR
isb
mov r0, r9 @ control register
mov r2, r7, lsr #14 @ get TTB0 base
mov r2, r2, lsl #14
ldr r3, cpu_resume_l1_flags
b cpu_resume_mmu
ENDPROC(cpu_v7_do_resume)
cpu_resume_l1_flags:
ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
#else
#define cpu_v7_do_suspend 0
#define cpu_v7_do_resume 0
#endif
__CPUINIT
/*
......@@ -276,36 +357,8 @@ __v7_setup:
ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP)
ALT_UP(orr r4, r4, #TTB_FLAGS_UP)
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
/*
* Memory region attributes with SCTLR.TRE=1
*
* n = TEX[0],C,B
* TR = PRRR[2n+1:2n] - memory type
* IR = NMRR[2n+1:2n] - inner cacheable property
* OR = NMRR[2n+17:2n+16] - outer cacheable property
*
* n TR IR OR
* UNCACHED 000 00
* BUFFERABLE 001 10 00 00
* WRITETHROUGH 010 10 10 10
* WRITEBACK 011 10 11 11
* reserved 110
* WRITEALLOC 111 10 01 01
* DEV_SHARED 100 01
* DEV_NONSHARED 100 01
* DEV_WC 001 10
* DEV_CACHED 011 10
*
* Other attributes:
*
* DS0 = PRRR[16] = 0 - device shareable property
* DS1 = PRRR[17] = 1 - device shareable property
* NS0 = PRRR[18] = 0 - normal shareable property
* NS1 = PRRR[19] = 1 - normal shareable property
* NOS = PRRR[24+n] = 1 - not outer shareable
*/
ldr r5, =0xff0a81a8 @ PRRR
ldr r6, =0x40e040e0 @ NMRR
ldr r5, =PRRR @ PRRR
ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
......@@ -351,6 +404,9 @@ ENTRY(v7_processor_functions)
.word cpu_v7_dcache_clean_area
.word cpu_v7_switch_mm
.word cpu_v7_set_pte_ext
.word 0
.word 0
.word 0
.size v7_processor_functions, . - v7_processor_functions
.section ".rodata"
......
......@@ -413,9 +413,52 @@ ENTRY(cpu_xsc3_set_pte_ext)
mov pc, lr
.ltorg
.align
.globl cpu_xsc3_suspend_size
.equ cpu_xsc3_suspend_size, 4 * 8
#ifdef CONFIG_PM
ENTRY(cpu_xsc3_do_suspend)
stmfd sp!, {r4 - r10, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
mrc p15, 0, r10, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs
ldmia sp!, {r4 - r10, pc}
ENDPROC(cpu_xsc3_do_suspend)
ENTRY(cpu_xsc3_do_resume)
ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
mcr p15, 0, ip, c7, c5, 4 @ flush prefetch buffer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode.
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg
@ temporarily map resume_turn_on_mmu into the page table,
@ otherwise prefetch abort occurs after MMU is turned on
mov r0, r10 @ control register
mov r2, r8, lsr #14 @ get TTB0 base
mov r2, r2, lsl #14
ldr r3, =0x542e @ section flags
b cpu_resume_mmu
ENDPROC(cpu_xsc3_do_resume)
#else
#define cpu_xsc3_do_suspend 0
#define cpu_xsc3_do_resume 0
#endif
__CPUINIT
.type __xsc3_setup, #function
......@@ -476,6 +519,9 @@ ENTRY(xsc3_processor_functions)
.word cpu_xsc3_dcache_clean_area
.word cpu_xsc3_switch_mm
.word cpu_xsc3_set_pte_ext
.word cpu_xsc3_suspend_size
.word cpu_xsc3_do_suspend
.word cpu_xsc3_do_resume
.size xsc3_processor_functions, . - xsc3_processor_functions
.section ".rodata"
......
......@@ -513,11 +513,49 @@ ENTRY(cpu_xscale_set_pte_ext)
xscale_set_pte_ext_epilogue
mov pc, lr
.ltorg
.align
.globl cpu_xscale_suspend_size
.equ cpu_xscale_suspend_size, 4 * 7
#ifdef CONFIG_PM
ENTRY(cpu_xscale_do_suspend)
stmfd sp!, {r4 - r10, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg
mrc p15, 0, r10, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
stmia r0, {r4 - r10} @ store cp regs
ldmfd sp!, {r4 - r10, pc}
ENDPROC(cpu_xscale_do_suspend)
ENTRY(cpu_xscale_do_resume)
ldmia r0, {r4 - r10} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode.
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg
mov r0, r10 @ control register
mov r2, r8, lsr #14 @ get TTB0 base
mov r2, r2, lsl #14
ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
b cpu_resume_mmu
ENDPROC(cpu_xscale_do_resume)
#else
#define cpu_xscale_do_suspend 0
#define cpu_xscale_do_resume 0
#endif
__CPUINIT
.type __xscale_setup, #function
......@@ -565,6 +603,9 @@ ENTRY(xscale_processor_functions)
.word cpu_xscale_dcache_clean_area
.word cpu_xscale_switch_mm
.word cpu_xscale_set_pte_ext
.word cpu_xscale_suspend_size
.word cpu_xscale_do_suspend
.word cpu_xscale_do_resume
.size xscale_processor_functions, . - xscale_processor_functions
.section ".rodata"
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册